Adding setsrange, setmrange, setvc, setslevel and setmlevel functionality to rocm lib and cli
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com> Change-Id: I5fd65ea7bcd5403aaf2e42d2aa28d837929da253
Este cometimento está contido em:
Divya Shikre
cometido por
Divya Uday Shikre
Divya Uday Shikre
ascendente
95d43e30e3
cometimento
54d4b9d500
@@ -595,6 +595,122 @@ def resetXgmiErr(deviceList):
|
||||
printLogSpacer()
|
||||
|
||||
|
||||
def setClockRange(deviceList, clkType, level, value, autoRespond):
|
||||
""" Set the range for the specified clktype in the PowerPlay table for a list of devices.
|
||||
|
||||
Parameters:
|
||||
deviceList -- List of DRM devices (can be a single-item list)
|
||||
clktype -- [sclk|mclk] Which clock type to apply the range to
|
||||
level -- [0|1] Whether to set the minimum (0) or maximum (1) speed
|
||||
value -- Value to apply to the clock range
|
||||
autoRespond -- Response to automatically provide for all prompts
|
||||
"""
|
||||
global RETCODE
|
||||
if clkType not in {'sclk', 'mclk'}:
|
||||
printLog(None, 'Invalid range identifier %s' % (clkType), None)
|
||||
RETCODE = 1
|
||||
return
|
||||
try:
|
||||
int(value)
|
||||
except ValueError:
|
||||
printErrLog(device, 'Unable to set %s range' % (clkType))
|
||||
logging.error('%s is not an integer', value)
|
||||
RETCODE = 1
|
||||
return
|
||||
confirmOutOfSpecWarning(autoRespond)
|
||||
printLogSpacer(' Set Valid %s Range ' % (clkType))
|
||||
for device in deviceList:
|
||||
if clkType == 'sclk':
|
||||
ret = rocmsmi.rsmi_dev_od_clk_info_set(device, rsmi_freq_ind_t(int(level)), int(value), rsmi_clk_names_dict[clkType])
|
||||
if rsmi_ret_ok(ret, device):
|
||||
printLog(device, 'Successfully set %s level %s to %s(MHz)' % (clkType, level, value), None)
|
||||
else:
|
||||
printErrLog(device, 'Unable to set %s level %s to %s(MHz)' % (clkType, level, value))
|
||||
RETCODE = 1
|
||||
elif clkType == 'mclk':
|
||||
ret = rocmsmi.rsmi_dev_od_clk_info_set(device, rsmi_freq_ind_t(int(level)), int(value), rsmi_clk_names_dict[clkType])
|
||||
if rsmi_ret_ok(ret, device):
|
||||
printLog(device, 'Successfully set %s level %s to %s(MHz)' % (clkType, level, value), None)
|
||||
else:
|
||||
printErrLog(device, 'Unable to set %s level %s to %s(MHz)' % (clkType, level, value))
|
||||
RETCODE = 1
|
||||
else:
|
||||
printErrLog(device, 'Unable to set %s range' % (clkType))
|
||||
logging.error('Unsupported range type %s', clkType)
|
||||
RETCODE = 1
|
||||
|
||||
|
||||
def setVoltageCurve(deviceList, point, clk, volt, autoRespond):
|
||||
""" Set voltage curve for a point in the PowerPlay table for a list of devices.
|
||||
|
||||
Parameters:
|
||||
deviceList -- List of DRM devices (can be a single-item list)
|
||||
point -- Point on the voltage curve to modify
|
||||
clk -- Clock speed specified for this curve point
|
||||
volt -- Voltage specified for this curve point
|
||||
autoRespond -- Response to automatically provide for all prompts
|
||||
"""
|
||||
global RETCODE
|
||||
value = '%s %s %s' % (point, clk, volt)
|
||||
try:
|
||||
any(int(item) for item in value)
|
||||
except ValueError:
|
||||
printLogNoDev('Unable to set Voltage curve')
|
||||
logging.error('Non-integer characters are present in %s', value)
|
||||
RETCODE = 1
|
||||
return
|
||||
confirmOutOfSpecWarning(autoRespond)
|
||||
for device in deviceList:
|
||||
ret = rocmsmi.rsmi_dev_od_volt_info_set(device, int(point), int(clk), int(volt))
|
||||
if rsmi_ret_ok(ret, device):
|
||||
printLog(device, 'Successfully set voltage point %s to %s(MHz) %s(mV)' % (point, clk, volt), None)
|
||||
else:
|
||||
printErrLog(device, 'Unable to set voltage point %s to %s(MHz) %s(mV)' % (point, clk, volt))
|
||||
RETCODE = 1
|
||||
|
||||
|
||||
def setPowerPlayTableLevel(deviceList, clkType, point, clk, volt, autoRespond):
|
||||
""" Set clock frequency and voltage for a level in the PowerPlay table for a list of devices.
|
||||
|
||||
Parameters:
|
||||
deviceList -- List of DRM devices (can be a single-item list)
|
||||
clktype -- [sclk|mclk] Which clock type to apply the range to
|
||||
point -- Point on the voltage curve to modify
|
||||
clk -- Clock speed specified for this curve point
|
||||
volt -- Voltage specified for this curve point
|
||||
autoRespond -- Response to automatically provide for all prompts
|
||||
"""
|
||||
global RETCODE
|
||||
value = '%s %s %s' % (point, clk, volt)
|
||||
try:
|
||||
any(int(item) for item in value.split())
|
||||
except ValueError:
|
||||
printLogNoDev('Unable to set PowerPlay table level')
|
||||
logging.error('Non-integer characters are present in %s', value)
|
||||
RETCODE = 1
|
||||
return
|
||||
confirmOutOfSpecWarning(autoRespond)
|
||||
for device in deviceList:
|
||||
if clkType == 'sclk':
|
||||
ret = rocmsmi.rsmi_dev_od_clk_info_set(device, rsmi_freq_ind_t(int(point)), int(clk), rsmi_clk_names_dict[clkType])
|
||||
if rsmi_ret_ok(ret, device):
|
||||
printLog(device, 'Successfully set voltage point %s to %s(MHz) %s(mV)' % (point, clk, volt), None)
|
||||
else:
|
||||
printErrLog(device, 'Unable to set voltage point %s to %s(MHz) %s(mV)' % (point, clk, volt))
|
||||
RETCODE = 1
|
||||
elif clkType == 'mclk':
|
||||
ret = rocmsmi.rsmi_dev_od_clk_info_set(device, rsmi_freq_ind_t(int(point)), int(clk), rsmi_clk_names_dict[clkType])
|
||||
if rsmi_ret_ok(ret, device):
|
||||
printLog(device, 'Successfully set voltage point %s to %s(MHz) %s(mV)' % (point, clk, volt), None)
|
||||
else:
|
||||
printErrLog(device, 'Unable to set voltage point %s to %s(MHz) %s(mV)' % (point, clk, volt))
|
||||
RETCODE = 1
|
||||
else:
|
||||
printErrLog(device, 'Unable to set %s range' % (clkType))
|
||||
logging.error('Unsupported range type %s', clkType)
|
||||
RETCODE = 1
|
||||
|
||||
|
||||
def setClockOverDrive(deviceList, clktype, value, autoRespond):
|
||||
""" Set clock speed to OverDrive for a list of devices
|
||||
|
||||
@@ -712,12 +828,14 @@ def setClocks(deviceList, clktype, clk):
|
||||
printLog(device, 'Successfully set %s bitmask to' % (clktype), str(bitmask))
|
||||
else:
|
||||
printErrLog(device, 'Unable to set %s bitmask to: %s' % (clktype, str(bitmask)))
|
||||
RETCODE = 1
|
||||
else:
|
||||
ret = rocmsmi.rsmi_dev_pci_bandwidth_set(device, freq_bitmask)
|
||||
if rsmi_ret_ok(ret, device):
|
||||
printLog(device, 'Successfully set %s to level bitmask' % (clktype), str(bitmask))
|
||||
else:
|
||||
printErrLog(device, 'Unable to set %s bitmask to: %s' % (clktype, str(bitmask)))
|
||||
RETCODE = 1
|
||||
printLogSpacer()
|
||||
|
||||
|
||||
@@ -2465,12 +2583,9 @@ if __name__ == '__main__':
|
||||
if args.setpcie:
|
||||
setClocks(deviceList, 'pcie', args.setpcie)
|
||||
if args.setslevel:
|
||||
pass
|
||||
# TODO: setPowerPlayTableLevel(deviceList, \'sclk\', args.setslevel, args.autorespond)
|
||||
setPowerPlayTableLevel(deviceList, 'sclk', args.setslevel[0], args.setslevel[1], args.setslevel[2], args.autorespond)
|
||||
if args.setmlevel:
|
||||
pass
|
||||
# TODO: setPowerPlayTableLevel(deviceList, \'mclk\', args.setmlevel, args.autorespond)
|
||||
# Don't do reset in combination with any other command
|
||||
setPowerPlayTableLevel(deviceList, 'mclk', args.setmlevel[0], args.setmlevel[1], args.setmlevel[2], args.autorespond)
|
||||
if args.resetfans:
|
||||
resetFans(deviceList)
|
||||
if args.setfan:
|
||||
@@ -2488,14 +2603,11 @@ if __name__ == '__main__':
|
||||
if args.setprofile:
|
||||
setProfile(deviceList, args.setprofile)
|
||||
if args.setvc:
|
||||
pass
|
||||
# TODO: setVoltageCurve(deviceList, args.setvc[0], args.setvc[1], args.setvc[2], args.autorespond)
|
||||
setVoltageCurve(deviceList, args.setvc[0], args.setvc[1], args.setvc[2], args.autorespond)
|
||||
if args.setsrange:
|
||||
pass
|
||||
# TODO: setClockRange(deviceList, \'sclk\', args.setsrange[0], args.setsrange[1], args.autorespond)
|
||||
setClockRange(deviceList, 'sclk', args.setsrange[0], args.setsrange[1], args.autorespond)
|
||||
if args.setmrange:
|
||||
pass
|
||||
# TODO: setClockRange(deviceList, \'mclk\', args.setmrange[0], args.setmrange[1], args.autorespond)
|
||||
setClockRange(deviceList, 'mclk', args.setmrange[0], args.setmrange[1], args.autorespond)
|
||||
if args.resetprofile:
|
||||
resetProfile(deviceList)
|
||||
if args.resetxgmierr:
|
||||
|
||||
Criar uma nova questão referindo esta
Bloquear um utilizador