DRM - Remove FD usage

Change-Id: I77dfa778ccd0d39a03289c2e11cf10357566ff16
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>

tests/amd_smi_test/functional/computepartition_read_write.cc

@@ -273,7 +273,6 @@ static void checkPartitionIdChanges(amdsmi_processor_handle* const processor_han
         "\"sudo rmmod amdgpu && sudo rmmod ast && sudo modprobe amdgpu\")."
         "\n\tCPX may not enumerate properly.\n";
       }
-      // amdsmi_wait_for_user_input();  // watch for any errors
       break;
     }
     amdsmi_kfd_info_t kfd_info;
@@ -433,7 +432,6 @@ void TestComputePartitionReadWrite::Run(void) {
                   << computePartitionString(updatePartition)
                   << " ===============" << std::endl;
       }
-      // amdsmi_wait_for_user_input();  // watch for any errors
 
       auto ret_set = amdsmi_set_gpu_compute_partition(processor_handles_[dv_ind], updatePartition);
       IF_VERB(STANDARD) {
@@ -464,7 +462,6 @@ void TestComputePartitionReadWrite::Run(void) {
                   << "\n\t Device might be in a static partition mode. "
                   << "With inability to change partition modes."
                   << std::endl;
-        // amdsmi_wait_for_user_input();  // watch for any errors
         break;
       }
 
@@ -493,7 +490,6 @@ void TestComputePartitionReadWrite::Run(void) {
          static_cast<amdsmi_compute_partition_type_t>(
           mapStringToSMIComputePartitionTypes.at(
             std::string(orig_char_computePartition)));
-    // amdsmi_wait_for_user_input();  // watch for any errors on going back to original partition
     auto ret_set = amdsmi_set_gpu_compute_partition(processor_handles_[dv_ind], updatePartition);
     EXPECT_TRUE(ret_set == AMDSMI_STATUS_SETTING_UNAVAILABLE
       || ret_set== AMDSMI_STATUS_NO_PERM
@@ -526,7 +522,6 @@ void TestComputePartitionReadWrite::Run(void) {
                 << " ==========================================================\n";
       std::cout << "\t**======================================================================\n";
     }
-    // amdsmi_wait_for_user_input();  // watch for any errors
     PrintDeviceHeader(processor_handles_[dv_ind]);
     amdsmi_accelerator_partition_profile_t profile = {};
     uint32_t partition_id[8] = {0, 0, 0, 0, 0, 0, 0, 0};
@@ -650,7 +645,6 @@ void TestComputePartitionReadWrite::Run(void) {
     AcceleratorProfileConfig original_profile_config = {};
     original_profile_config
       = getAvailableProfileConfigs(dv_ind, profile, profile_config, isVerbose);
-    // amdsmi_wait_for_user_input();  // watch for any errors
 
     IF_VERB(STANDARD) {
       std::cout << "\t**=========================================================\n";
@@ -772,7 +766,6 @@ void TestComputePartitionReadWrite::Run(void) {
                   << profile_config.profiles[config].profile_index << ")"
                   << " ===============" << std::endl;
       }
-      // amdsmi_wait_for_user_input();  // watch for any errors
 
       auto ret_set = amdsmi_set_gpu_accelerator_partition_profile(
                         processor_handles_[dv_ind],
@@ -799,7 +792,6 @@ void TestComputePartitionReadWrite::Run(void) {
                   << "\n\t Device might be in a static partition mode. "
                   << "With inability to change partition modes."
                   << std::endl;
-        // amdsmi_wait_for_user_input();  // watch for any errors
         break;
       }
       if (ret_set == AMDSMI_STATUS_NOT_SUPPORTED) {
@@ -883,7 +875,6 @@ void TestComputePartitionReadWrite::Run(void) {
         std::cout << "\t**" << "amdsmi_get_gpu_accelerator_partition_profile: "
                   << "Not supported on this machine, skipping remaining tests." << std::endl;
       }
-      // amdsmi_wait_for_user_input();  // watch for any errors
       break;
     }
 
@@ -923,7 +914,6 @@ void TestComputePartitionReadWrite::Run(void) {
     std::cout << "\t**Test #3: Check fluctuating # of devices & partition IDs ==============\n";
     std::cout << "\t**======================================================================\n";
   }
-  // amdsmi_wait_for_user_input();  // watch for any errors on going back to original partition
 
   // ---------------------------------------------------------//
   // TEST 3: Check fluctuating # of devices & partition IDs   //
@@ -942,7 +932,6 @@ void TestComputePartitionReadWrite::Run(void) {
       std::cout << "\t**======================================================================\n";
     }
     // Leaving for debug purposes
-    // amdsmi_wait_for_user_input();  // watch for any errors on going back to original partition
     uint32_t device_index = 0;
     amdsmi_processor_handle p_handle = {};
     uint32_t current_num_devices = 0;
@@ -1025,7 +1014,6 @@ void TestComputePartitionReadWrite::Run(void) {
                   << "\n\t Device might be in a static partition mode. "
                   << "With inability to change partition modes."
                   << std::endl;
-        // amdsmi_wait_for_user_input();  // watch for any errors
         break;
       }
 
@@ -1052,7 +1040,6 @@ void TestComputePartitionReadWrite::Run(void) {
         EXPECT_NE(updatePartition, mapStringToSMIComputePartitionTypes.at(
           std::string(current_char_computePartition)));
       }
-      // amdsmi_wait_for_user_input();  // watch for any errors on going back to original partition
     }
 
     uint32_t device_index3 = 0;
@@ -1068,7 +1055,6 @@ void TestComputePartitionReadWrite::Run(void) {
       std::cout << "\t**ABOUT TO GO BACK TO ORIGINAL PARTITION ("
                 << orig_char_computePartition << ")\n";
     }
-    // amdsmi_wait_for_user_input();  // watch for any errors on going back to original partition
     auto ret_set = amdsmi_set_gpu_compute_partition(p_handle3, updatePartition);
     checkPartitionIdChanges(processor_handles_, dv_ind, std::string(orig_char_computePartition),
           isVerbose, true);

tests/amd_smi_test/functional/memorypartition_read_write.cc

@@ -253,7 +253,6 @@ void TestMemoryPartitionReadWrite::Run(void) {
     AcceleratorProfileConfig original_profile_config =
       getAvailableProfileConfigs(dv_ind, profile, profile_config, isVerbose);
     orig_dev_config[dv_ind] = original_profile_config;
-    // amdsmi_wait_for_user_input();  // watch for any errors
 
     IF_VERB(STANDARD) {
       std::cout << "\t**=========================================================\n";

tests/amd_smi_test/main.cc

@@ -116,7 +116,6 @@ static void RunGenericTest(TestBase *test) {
 //  RunGenericTest(&<test_obj>);
 // }
 TEST(amdsmitstReadOnly, TestVersionRead) {
-  // amdsmi_wait_for_user_input();
   TestVersionRead tst;
   RunGenericTest(&tst);
 }