Some systems have kfd sysfs properties entries that
are unreadable--for example, when a multi-gpu system is
dividing the gpus among containers, each container may
only be able to access certain gpus.
Previously, all kfd topology node properties entries were
assumed to be valid. Now, we check for readability before
declaring them "valid".
Fixes SWDEV-240169
Also:
* remove an assertion that would happen when no pcie
device identifier files are found on the system.
* fix cpplint issues
Change-Id: I74321b685159dd2628c890b33c39ad82988cb9dd
[ROCm/amdsmi commit: 68155baed5]
This corrects issues that arose after OAM reorganization.
It should address SWDEV-243294.
Also, fix some compile warnings that show up on RHEL.
Change-Id: Id14d444905da35cd7346bcfbcd82b6d0572708c4
[ROCm/amdsmi commit: c2ef9a6879]
Also:
* When destroying a counter, make sure to stop the counter first
* In the test, do not stop (disable) the counter before
reading it.
* Clean up some whitespace in other tests
* Re-add manual pdf file
Change-Id: I0786ef3a994ca568299c77e44f092af8943ac33d
[ROCm/amdsmi commit: f946ea37ef]
* Added a new test to verify mutual exclusion of access to device
resources
* Added some missing acquiring of mutexes to some RSMI calls, as
well as try-catch blocks.
Change-Id: I87aac009878a0b2d1f975e1d5b794d887bb23ff9
[ROCm/amdsmi commit: f8b57c3b16]
* Don't make different shared memory mutexes for different users
* Don't delete (unlink) the shared mutex file if the mutex
initialization fails. This may mess up other processes that
are using it. Instead, print a message on how to resolve the
situation, and then throw an error.
Note, this situation comes up when debug builds (usually)
either assert() or otherwise end execution without a proper
clean up.
* Remove cpplint from shared_mutex code
Change-Id: I5f8ca6150cac5c2405fb97007516da345093f966
[ROCm/amdsmi commit: 52196caaee]
Given a device index, return the corresponding NUMA node for the
device.
Also, add NUMA node tests to Sys Info Read test.
Change-Id: I0df4937470e6362e6737ccea568d4b3e5890c91a
[ROCm/amdsmi commit: fd79e5c161]
This solution takes into account that some hwmons use
label files to map sensor types. The previous solution
did not take this into account.
Change-Id: I1d6204573cefa8197b2cfe0ffb412b545df3d80a
[ROCm/amdsmi commit: 324c0ca0e5]
Given a process ID, give the device indices that process is
currently using.
Also:
* made corrections to how RSMI, amdgpu (ie, "card#") and
KFD indicies translate from one another
* add a few missing error codes to rsmi_status_string()
* fix some formatting
Change-Id: Icd2cae66bb4fec768da96af7cf9cf8b8b66ec7f9
[ROCm/amdsmi commit: 2d6e15190c]
Improvements include
* adding additional build flags that warn about stack-smashing
and type conversion errors
* run-time checks for valid function input values and adquate
space for the result of arithmetic operations.
* make sure default case for switch statements do something
besides just assert
* disable using env. var. debugging in release mode
Change-Id: I5f048310c5c56e05d9ec31bcc273404d6a0dd646
[ROCm/amdsmi commit: d00b9ac07d]
* Update doc. on api-support function
* Check for valid integer value when reading a monitor int. val.
* If fan-write test attempts to set speed higher than max.
possible, then skip the test
Change-Id: I01ad0ab1f4caffdb0d2c26e9575f278c35a6b017
[ROCm/amdsmi commit: 52dfa4bcca]
For device-getter functions, allow users to specify a nullptr
for the provided buffer. In those cases, the function will return
RSMI_STATUS_NOT_SUPPORTED if the hardware or system software does
not support the function. If the function is supported, then
RSMI_STATUS_INVALID_ARGS will be returned, unless a different
error is encountered.
Additionally, tests and documentation were updated to reflect
this change.
Change-Id: Ie7db3a4c8c66af97ebd7ee1e3b95cd331ace9d9c
[ROCm/amdsmi commit: 68d25e82fd]
Add support and testing for reading the vram vendor associated with
the GPU. The vram vendor can be found as a separate sysfs file at:
/sys/class/drm/card[X]/device/mem_info_vram_vendor
The vram vendor is displayed as a string value.
Change-Id: I12c8e56e57f45aa08d7d6c25338c4e468ed1c7fc
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
[ROCm/amdsmi commit: 2412dff6a2]
The new functions added in this commit allow a caller to tell up
front what functions, function variants and monitors are
supported.
Also,
* fixed a few documentation/formatting issues
* fixed a process_info test issue
Change-Id: I2184ab1a4a6898f847e791f273e2185d556e78e9
[ROCm/amdsmi commit: 551b15182b]
If the 32-bit domain is found in the kfd node properties for
a device, then it will be used when constructing the bdfid.
If it's not present, it will continue to use the 16 bit version.
Also, whether or not 32b or 16b are used for the domain, the
domain will now be placed in the upper 32b of the 64b bdfid.
* Fixed some unrelated doxygen issues
Change-Id: Icb5116daa1ab45ee305bdbe6cd5df5736dd3ffa3
[ROCm/amdsmi commit: 469af303d6]
* Specifically, address case when brand name is longer than buffer
provided
* Also, slightly modify prototype to match similar, existing APIs.
* Address some cpplint issues.
Change-Id: Iaf77304e23085123e88f301e4b33bc4e6be2a225
[ROCm/amdsmi commit: 01e0800741]
Add support and testing for reading the brand name associated with
a specific GPU (such as mi25, mi50, mi60, etc). The brand name is
associated with the SKU of the GPU, and some brand names can be
mapped from multiple different SKUs.
Change-Id: I36eb95ca8e72efdd294ccd684841195925dfe820
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
[ROCm/amdsmi commit: 7f2d970a80]
RAS formatting changed, so get it to handle both types of sysfs output
until it's normalized
Change-Id: I56f2a2495af8ff4d01011bc614283376afb9ad0a
[ROCm/amdsmi commit: a34832f11e]
Also, don't return an error for empty sysfs files. The reserved memory
page file will often have no lines. We don't want it to appear that
this function is not supported if the file is empty.
Change-Id: I1d28bb184ea587bb578fe71dd75adc2a812d09a8
[ROCm/amdsmi commit: 73c54e1fd0]
Function to get the drm minor number associated with ROCm device
Change-Id: I9356b9ca75151882acbb075076bc072f08b73aae
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
[ROCm/amdsmi commit: 68cb303a44]
Added implementation of and tests for
rsmi_dev_compute_process_info_by_pid_get() and
rsmi_dev_compute_process_info_get()
Change-Id: I4c4f5f39fe6701da37916c9ad41449b5d35ac7af
[ROCm/amdsmi commit: 9b93cbe21d]
Add support and testing for reading the Unique ID associated with a
specific GPU. This ID will persist across reboots, even if the GPU is
moved to a different machine. Note that this is per-GPU, not per-card,
as some cards have multiple GPUs, and each GPU will get a unique
identifier
Change-Id: Idce50c6febc2ceb1a4c1200d2489ec8b9d8fe174
[ROCm/amdsmi commit: 35d2807196]
* If vendor/device/subsystem name is not found, use device ID string
* Update documentation for get-name functions
* Add support for junction, edge and memory temperature sensors
[ROCm/amdsmi commit: 11f714326b]
With newly added initialization parameters that can be
passed to rsmi_init(), you can tell RSMI to consider other
devices.
Also:
-fixed incorrect header file name that would break in C
builds
-modified rsmi_init() and rsmi_shut_down() to reinitialize and
clear static structures
[ROCm/amdsmi commit: ae7ca83920]
With newly added initialization parameters that can be
passed to rsmi_init(), you can tell RSMI to consider other
devices.
Also:
-fixed incorrect header file name that would break in C
builds
-modified rsmi_init() and rsmi_shut_down() to reinitialize and
clear static structures
[ROCm/amdsmi commit: d7de7e23cb]
* By default, only consider AMD GPU's in RSMI device list
With newly added initialization parameters that can be
passed to rsmi_init(), you can tell RSMI to consider other
devices.
Also:
-fixed incorrect header file name that would break in C
builds
-modified rsmi_init() and rsmi_shut_down() to reinitialize and
clear static structures
* By default, only consider AMD GPU's in RSMI device list
With newly added initialization parameters that can be
passed to rsmi_init(), you can tell RSMI to consider other
devices.
Also:
-fixed incorrect header file name that would break in C
builds
-modified rsmi_init() and rsmi_shut_down() to reinitialize and
clear static structures
* Remove duplicate definition of rsmi_init_flags_t
[ROCm/amdsmi commit: a0014f34df]
With newly added initialization parameters that can be
passed to rsmi_init(), you can tell RSMI to consider other
devices.
Also:
-fixed incorrect header file name that would break in C
builds
-modified rsmi_init() and rsmi_shut_down() to reinitialize and
clear static structures
[ROCm/amdsmi commit: 15ca1c26a0]
Chris Freehill
Mukul Joshi
Mike Li
Divya Shikre
Ori Messinger
Kent Russell
Harish Kasiviswanathan
Chris Freehill