For new ASIC, the RDC_EVNT_XGMI, RDC_FI_PCIE_RX and RDC_FI_PCIE_TX
are not supported. New fileds RDC_FI_XGMI and RDC_FI_PCIE_BANDWIDTH
should be used.
Change-Id: Iff5bbef4c07994090fa7c4e9b319966215525283
These RUNPATH changes make it so libraries can be found without setting
LD_LIBRARY_PATH.
Mostly tested on installed RDC binaries and libraries. The
build binaries should also work.
Change-Id: Ifd908a5b61d24dfcbb1d08d21b4ee830156d8643
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
If the card does not have edge temperature, fallback to junction
temperature. If the card only have socket power, then use socket
power instead.
Change-Id: I053a67a89cf3b29a34e82123f522c08d7dd68916
Also add stddef.h workaround for old GCC.
RHEL-8 still uses GCC 8.5 and templates are not well supported.
Change-Id: Ia4dae23892ec63682ea848c46ba81de85cf6d209
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
NOTE: RVS Build is disabled by default due to CI build issues.
Change-Id: I1593f0fe22075a9f86f54afa3ac151e109f1f7bd
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Rebuild rdc_ras library on Ubuntu 20.04 for backward compatibilities.
Fallback to rocm_smi for ECC errors if rdc_ras library not available.
Change-Id: I8db9687e3eb54a6f62fce2c8d57a796c6da6b5c4
* Move hsa_init out of rocmtools and into RDC
* Remove secondary hsa_shut_down from ROCR module
Change-Id: I57d84d41ddc51595b98e734265f10bc5129a7352
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Depends-On: I2b389ee1a9ba3507b2df1fc2fe83598f67731aac
This commit adds integration with ROCmTools
Additional changes:
- Fix DEB and RPM installation issue when systemd is not present
- Fix typos in rdc.h
- Wrap negative values in parentheses in rdc.h
- CMAKE: Improve rocm_smi searching
- README: Improve formatting, add info about ROCmTools
Metrics added: 700-714
Metrics can be listed with `rdci dmon --list-all`
Majority of the metrics are only supported by Instict (MI) series GPUs
700 RDC_FI_PROF_ELAPSED_CYCLES should be available on most devices
See README for more information
Change-Id: I907d3eacdc92fc5588ca6c76c2fa1ce0ad900770
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Main CMake improvements:
* Add rdctst with -DBUILD_TESTS=ON
* Set default ROCM_DIR to /opt/rocm/
* Split rdc_libs/CMakeLists.txt into subdirectories
* Package tests into rdc-tests.deb and .rpm
Misc improvements:
* Add .editorconfig to normalize code formatting
* Add .gitignore
* Expand RPATH for gRPC to reduce LD_LIBRARY_PATH usage
* Export compile_commands.json
* Show warning and do not install gRPC if GRPC_ROOT is left as default
* Move .in files into relevant subdirectories
* Move most variables into project CMakeLists.txt to avoid redefinitions
* Normalize CMakeLists.txt formatting (4 spaces indentation)
* Rename DIAGNOSTIC_LIB to RDC_ROCR_LIB
* Update gRPC version in README to 1.44.0
* Remove gtest source
* Pull gtest from github if not installed
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Depends-On: I1039ef61247e3f0ff822925cc869fb0c2bf3af85
Change-Id: I879b21428e6642f19fda67092b365d8b78b7ba7b
A new diagnostic module librdc_rocr.so is created. The
module uses Rocr to test the memory allocation, memory access
and compute queue ready status.
Change-Id: I9098f4fc3209bf381b7cb3658a4e94c2e22f2fe9
Provides a RdcSmiDiagnostic module, which will call rocm_smi_lib.
It will support following diagnostics: Get GPU Topology, Check GPU
parameters and check processes running on the GPUs.
The grpc client and server side diagnostics function is added.
The diag module is added to the rdci.
Change-Id: I10a0cf3c20556a61373ab686f82cae75acaa40dd
The rdcd uses another thread to listen the GPU events. That thread
runs in a tight loop which consume 100% CPU.
The fix will add a sleep to yield CPU.
Bug: SWDEV-291576
Change-Id: I7996720aab4a80346d79b1c73ee532d2abcd93cc
RDC can optimize by bulk fetching multiple metrics using a single
rocm_smi call. However, currently this is not completely supported in
all ASIC generations. By default disable this for now.
Set environment variable RDC_BULK_FETCH_ENABLED=TRUE to enable
RDC bulk fetch.
BUG: SWDEV-289316
Change-Id: Ibb55514f198356dccf5f47bb0fd2d53c17acb251
The API interface defines how the caller will use the API. An
example also shows how the API can be used.
It also defines the RdcDiagnostic module which can load the
library dynamically and then dispatch diagnostic test to run.
Change-Id: I1e041aab86f7e19338860f5ba65262977f4ea9cb
RDC is trying to bulk fetch power usage from gpu_metrics. If the
gpu_metrics is 0, it will fallback to rsmi_dev_power_ave_get().
Change-Id: I57d165d6af0c91b39798c89eef317d4e5df2d0f6
Write access is required for some RSMI services. This change
temporarily permits write access so configuration can be done,
and then turns it off.
To help with this, the ScopedCapability struct is introduced to
provide scope limited access, helping to ensure a process is not
left with extra capability, should an exception occur.
Change-Id: I4978a1a688db935b8bfc27b3b537a0dd07959d3f
RDC_EVNT_XGMI_[2-5]_THRPUT were missing from RDC. Additionally,
these were handled as "pseudo" events, but this is not
necessary.
Change-Id: I3478365ac0d78f60a7b63235bea484f3edb8bd16
The RDC provides a wrapper to bulk fetch metrics from rocm_smi_lib.
If the video card does not support bulk fetch or the metrics cannot be
bulk fetched, it will fallback to fetch them one by one.
Change-Id: I8852ba1ed67e0fabc805c93b1080f74c233516e1
The new raslib fields are added to RDC for dmon.
* The rdc_field.data, rdc.h and rdc_bootstrap.py are changed
for new fields.
* The RDC_FI_ECC_CORRECT_TOTAL and RDC_FI_ECC_UNCORRECT_TOTAL are
removed from RdcSmiLib.cc, and will be gotten from raslib.
Change-Id: I4ee016e3d52e9d38b54406ca129da511f741c6d6
Also:
* print header line every 50 line on output
* print events that are being listened for with header
* cpplint clean-up
Change-Id: Ic049eb79156a9528b556e56f0fa43e1344f898cc
The framework now supports watch() and unwatch(), which can be used
by the telemetry library to init events or pre-fetch fields when recording
starts.
* A new header file RdcTelemetryLibInterface.h is defined for library to
include it.
* The RdcWatchTable will not talk to RdcMetricFetcher directly anymore.
It will call the framework watch/unwatch to dispatch it to the libraries.
* Make the python binding consistent with the current code.
Change-Id: Ie5731d920ed5928f901369d60c23bd450807a562
RAS library will provide two new APIs:
rdc_status_t rdc_module_init(uint64_t flags);
rdc_status_t rdc_module_destroy();
When RDC load the librdc_ras.so, it will call rdc_module_init().
When RDC exit, it will call rdc_module_destroy()
Change-Id: I7f5c81fd19a45a906c3c339cd6eabee2277f27ca
The framework is required for RAS integration. When the RAS fields
need to be retrieved, the framework will load the RAS library at run time,
and then call the RAS function to retrieve RAS metrics.
* The RdcModuleMgr will be used to manage different modules. RDC
only has the telemetry module now.
* When RDCTelemetryModule is loaded, it will load the RAS library.
It will also call rdc_telemetry_fields_query() defined in the RAS
library for the list of fields RAS supported.
* The RdcSmiLib is a wrapper for the rocm_msi_lib to provide the
interface required by the RDCTelemetryModule.
* The RdcWatchTable will use the RdcModuleMgr to get the
RDCTelemetryModule to bulk fetch mulitple fields.
* The RdcTelemetryModule will dispatch those fields to different
library: RdcSmiLib or RdcRasLib.
The watch() and unwatch() in the RDCTelemetryModule will been implemented
at the next task.
Change-Id: I81b01d5b52d1ea3cdcec7c09af86b6622dd5899e
Adds support for RSMI event counters. This also includes
"macro" or "pseudo" events, in which an event value is
obtained from RSMI, followed by some post processing before
being displayed in rdci.
Aside from the support of new fields, the main update here
is to introduce an initialization and "shutdown" call for
new fields that will require this.
Also, includes some modifications to the rdci dmon list
command:
* in rdc_field_data.data, added the ability to specify whether
a field should be hidden or not, by default. This will
allow us to support many fields, even those that are not
typically of interest (but sometimes may be), without
confusing the user or unnecessary clutter.
* added a --list-all option which lists all available field
including the more obscure fields.
Change-Id: I01dd0edea963c12f82c6e44f893a390711ef3e83
Make the RDC use the new rdc_field_t enum instead of uint32_t.
This will help prevent invalid field types from being passed in.
Also, centralize where data related to fields is kept. This will
reduce the number of places where changes are required each
time a new field is added.
Finally, cleaned up several cpplint issues.
Change-Id: I48e4512e18c164411d8b09ae3d4bed99fba359ec
In the job stats, in addition to the max, min and average,
it will also display the standard deviation.
A new option --json is added to the rdci to output the results
in json format.
In the job stats, using the GMT time instead of timestamp
for start and end time.
Change-Id: If245c4fc4854a1dc867f97ff5aa9112af7962eca
In the rdci dmon and fieldgroup, now the fields can be specified
using either number id or the field name.
When the rdc is async fetching metrics, it will not report that fetch
as an error.
Change-Id: I81331e2c239af987181147be5ac0e29ba1617ab4
Remove the * in the rdci stats
When a group is created, the GPUs can be added in the same command.
Add the support to the memory temperature.
Add the support to the memory clock.
Add the support to report the ECC errors.
Add the support to report the PCIe bandwidth throughput.
Since the RX/TX throughput may take 1 second to retreive, an async fetch is implemented
in the RdcMetricFetcherImpl.
Change-Id: If04f602fe1f2d14dbf7c2fb189549fd030523f9a
Add support for the stats subsystem in rdci
Modify the dmon system to handle the case when no GPUs in a group
Change-Id: I5a18e1201d24b5318b8e324a77551a757b108f25
Add the job stats APIs in the rdc_api_service at the server side rdcd
Add the job stats APIs for the RdcStandaloneHandler at the client side
Make the load librdc.so and librdc_client.so thread safe.
Impelement async update all fields in RdcEmbeddedHandler.
Change-Id: I659d91efb32d1094d3b7f0f2cec39518cd7336ce
Add the function to start and stop the job recording.
Add the function to get the job stats for each GPU and summary of multiple GPUs
Add the function to remove the jobs.
Add a class RdcLogger which can control the log level using the environment variable RDC_LOG.
This is similar to GRPC_VERBOSITY gRPC. When the customer has the issues, he can enable the verbose
log to help us to troubleshoot the issues.
Add the -u support in the rdci group, fieldgroup and dmon for connecting to rdcd without authentication.
Change-Id: I22c591823c1ee6485db106b911bed8271d1b2769
Implement the APIs defined in the RdcStandaloneHandler to make gRPC call to daemon
Implement the APIs defined in the RdcAPIServiceImpl to handle the gRPC calls in daemon
Add two APIs to get all GPU groups and field groups: rdc_group_get_all_ids()
and rdc_group_field_all_ids()
Those two APIs are required by the rdci group and fieldgroup
sub-modules.
Change-Id: I066091423146dea180c16af212688ed43dc44611
The RDC API is changed to pass the certificates to the gRPC.
Add the support to add all GPUs in the host to a group. Also before
add a GPU to a group, the RDC API will verify that GPU exists or not.
Add the support to fetch the temperature metrics.
Change-Id: I5857ef03fede233d16e8b2836be120f33172da93
Support cache manager and watch table in rdc_lib
RdcCacheManagerImpl.cc is added to implement cache of metrics. Currently, only
integer mertics are supported. The cache manager provids function to retrieve the
latest and history metrics from cache. It also provides interfaces to update and evict the cache.
RdcWatchTableImpl.cc is added to implement watch and unwatch fields. It uses the
field settings to control how frequently a field needs to be updated. We have a preliminarily
performance optimization for this class as it may be called very frequently.
RdcMetricsUpdaterImpl.cc is added to run the update at background thread when
RDC_OPERATION_MODE_AUTO is set.
After this code change, the rdcd/rdci should be able to implement basic discovery, group and dmon
function. The job management function is not implemented in the skeleton rdc_lib yet.
Change-Id: I26cff8c2ec85d1ad8e7df24c66b02f0060838d37
The rdc.h is modified for new discovery and grouping APIs.
The RdcGroupSettingsImpl.cc is added to implement the GPU group and
the field group management.
The RdcMetricFetcherImpl.cc is added to fetch the metrics from
rocm_smi_lib. Currently, only support power, memory, GPU utilization,
temperature, GPU clock, total device and device name.
A new example field_value_example.cc is added to demo how to record
the fields and retrieve data from cache.
Change-Id: I57acfa048fe9b3d848e2d441e768b3a63ccae3f8
The rdc.h is the only header file will be provided to the user.
The inital version only includes the data structure and function
required for the job stats example.
The example folder has one example demonstrated how to use the API
to collect the job summary stats.
The RdcBootStrap.cc will dynamically load different libraries when user
select either the standalone or embbed mode. We also created a
dummy RdcEmbeddedHandler.cc for librdc.so.
In order to run the example after build, it needs to specify the
LD_LIBRARY_PATH. Assume current folder is the build folder:
LD_LIBRARY_PATH=$PWD/rdc_libs $PWD/example/jobstats
The folder is structured in following ways:
example
include
- rdc - rdc.h (the only header file exposed to the user)
- rdc_libs
- impl
rdc_libs
- boostrap
- src
- rdc
- src
- rdc_client
- src
- rdc_server
- src
Change-Id: Ia386ddf4cabcb2dc4fe82de6464ca0619cb3d959
Galantsev, Dmitrii
Bill(Shuzhou) Liu
Chris Freehill
Divya Shikre