- **Added evicted_time metric for kfd processes**.
- Time that queues are evicted on a GPU in milliseconds
- Added to CLI in `amd-smi monitor -q` and `amd-smi process`
- Added to C API and Python API:
- amdsmi_get_gpu_process_list()
- amdsmi_get_gpu_compute_process_info()
- amdsmi_get_gpu_compute_process_info_by_pid()
---------
Signed-off-by: Pryor, Adam <Adam.Pryor@amd.com>
* Used KFD to determine linking between GPUs and PIDs rather than depend on fdinfo's per pid single gpu bdf info that we were getting.
Signed-off-by: adapryor <Adam.pryor@amd.com>
---------
Signed-off-by: adapryor <Adam.pryor@amd.com>
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
* Added ability to format gpu_metrics v1_9
* New gpu_metrics format from the driver should allow amd-smi to parse with future compatibility guaranteed
---------
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Signed-off-by: adapryor <Adam.pryor@amd.com>
Co-authored-by: Oliveira, Daniel <daniel.oliveira@amd.com>
- Changed amd-smi static --vbios to accept ifwi
- Change population logic for vbios version API
- Added IFWI boot_firmware to the CLI, C++, Rust, and Python API
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Change-Id: I4ea504d40a43cfb011ab38fc9a664ecf12d39c8a
Previously, the function was iterating through all enum
values(0-250). This fix reduces the number of hwmon operations
by calling add_temp_sensor_entry only for temperature types
that fall within the defined enum ranges.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Changes:
- Update violation status logic and metric naming for XCP/XCC metrics (thrm/thm consistency)
- Added XCP identifier in monitor to allow partition metrics to be shown with applicable APIs
(Violation Status is the first example of this in monitor)
- Improve CLI monitor output:
support multiple GPU lines per GPU, add new columns, and better formatting
- Refactor helpers and logger for flexible unit formatting and table rendering
- Add examples for amdsmi_get_gpu_pm_metrics_info()/amdsmi_get_gpu_reg_table_info()
new metrics APIs in C++ example
- Sync Python/C++ interface and structures for new metrics fields and naming
- Remove deprecated/unused RSMI activity APIs, documentation not needed since
the APIs no longer exist in ROCm SMI either.
- Cleanup metric violations + fix handle watch arguments
- Provide better handling/doc for average_flattened_ints()
- Group xcp metrics with brackets in human readable + adjust output size
Signed-off-by: Poag, Charis <Charis.Poag@amd.com>
Description:
- Added a new API `amdsmi_gpu_driver_reload()` to reload the AMD GPU driver independently.
- Updated CLI (`sudo amd-smi reset -r`) and Python bindings to support driver reload functionality.
- Removed automatic driver reload from `amdsmi_set_gpu_memory_partition()` and `amdsmi_set_gpu_memory_partition_mode()`.
- Enhanced CLI and test cases to allow users to control when the driver reload occurs.
- Updated documentation and changelog to reflect the new driver reload process.
- Improved error handling and logging for driver reload operations.
- Added progress bar and user confirmation prompts for driver reload commands.
* Update build/test strategy to only allow one test execution at a time
* Modify API verbage + modify systemctl error output
- Systemctl is typically not enabled on docker.
- And is an edge case for gpu being active process/etc for display devices.
* Remove AMDSMI_STATUS_AMDGPU_RESTART_ERR from the return values
* Move driver reload to after we save original compute partitions
---------
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Add support to Query UBB/OAM temperature.
* Updated Python API with new temperature metrics enum
---------
Co-authored-by: Bill Liu <shuzhliu@amd.com>
Co-authored-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
The xgmi read and write accumulated data from gpu metric index
is based on sysfs xgmi_port_num file. Mapped these two to display
read and write wrt src_gpu Vs dst_gpu.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
* Add the API and CLI to show the board voltage.
---------
Change-Id: Icb25bd653bb1d004704b5a21b378ca31b2b242c7
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
Signed-off-by: AL Musaffar, Yazen <Yazen.ALMusaffar@amd.com>
feat: Report PLDM Bundle from SMC to IB
Code changes related to the following:
* APIs
* CLI
* Unit tests
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Change-Id: I35ccf01eb612ca80e3ae6b72039085c18c989222
- Added more events to `amdsmi_evt_notification_type_t`
Change-Id: I6a256fe828e4bec3197c7fecbed374ab17c6f850
Signed-off-by: Adam Pryor <Adam.Pryor@amd.com>
* Changes:
- Updates to DRM renderD* / card* pathing for partition
- Now use KFD to discover AMD devices and populate accordingly
Device MUST have an accessible KFD node (via cgroups)
- Updated serveral AMD SMI CLI outputs to handle SYSFS files
which are not accessible on partition nodes
- Tests are updated to handle not supported features
- Added new method to help get card/drm info
(rsmi_dev_device_identifiers_get) from ROCm SMI
- Renamed device->get_card_id() & device->get_drm_render_minor()
These can now be used on internal AMD SMI calls.
- Removed warnings shown in build
Change-Id: Ice882fd9b97fb625a5bd4ef327f3ceaf247dc570
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
- Updates:
- Adding the following metrics to allow new calculations for violation status:
- Per XCP metrics gfx_below_host_limit_ppt_acc
- Per XCP metrics gfx_below_host_limit_thm_acc
- Per XCP metrics gfx_low_utilization_acc
- Per XCP metrics gfx_below_host_limit_total_acc
- Increasing available JPEG engines to 40. Current ASICs may not support all 40. These will be indicated as UINT16_MAX or N/A in CLI.
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Co-authored-by: Charis Poag <Charis.Poag@amd.com>
Multi-threaded application rsmi_dev_gpu_metrics_info_get() causes crash
Code changes related to the following:
* API implementation changes
Change-Id: I1f1fb39c1125569ec5d534b37fd6f68c8829eef7
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Authored-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Units were off and VCLK/DCLK outputs were not coming in
properly through amdsmi_get_clk_freq()
Now we match units sent back through rsmi_dev_gpu_clk_freq_get (MHz).
CLI now shows maximum of 2 VCLK/DCLKs otherwise shows N/A if there
is no current_freq listed.
Change-Id: I8a7b66cbb5263e8d396f8568c104e1ce3512923d
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Features added:
- [SWDEV-475244] Add new interface to get max memory bandwidth
Updated API: amdsmi_get_gpu_vram_info
Updated: struct amdsmi_vram_info_t to include vram_max_bandwidth
CLI: amd-smi static --vram
- [SWDEV-488349] Add new interface for XGMI link status
New API: amdsmi_get_gpu_xgmi_link_status
CLI: amd-smi xgmi --link-status
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Change-Id: I1aa35b741136eb4f02f7ea9a95b865886273eb72
Issues include:
SWDEV-480250
SWDEV-480255
SWDEV-480248
Known issue:
`amd-smi event` has threads taking events from the same device
which, in the case of resetting gpus, makes it seem like some gpus have
reset mulitple times and other have not reset at all.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: Ic7dcc214e0366fc1532ece579d915d34d35d5407
Changes:
- [CLI] Added warning screen to AMD SMI users
setting memory partition
- [CLI] Added a progress bar time-bar for CLI sets display to 40 seconds
- [API] Updated to wait until the driver reloads with SYSFS files active
- [CLI] Now users can set or reset without providing:
amd-smi set -g all <set arguments>
or amd-smi reset -g all <set arguments>
now can directly call -> sudo amd-smi set <set arguments>
or sudo amd-smi reset <set arguments>
- [SWDEV-475712][CLI/API] Fixed target_graphics_version field
not properly displaying for older MI or Navi ASICs.
- [All APIs] Added a catch for the driver to report invalid arguments
now these APIs will show AMDSMI_STATUS_INVAL
(ex. changing to NPS8 if the device does not support it)
- [Install] Modified paths for Python install commands to support
multi-ROCm installs
Change-Id: Id11f25d68a82d23c6b2d77ccb30b51e860dd0ca7
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Implements DiscoverIOLinkPerNodeDirection() based on KFD Node infrastructure;
'/kfd/topology/nodes/*/io_links'
Code changes related to the following:
* Internal implementation
Change-Id: Iccd84d1d69234dbeae4d4925f657e7e3bd801106
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Changes:
- Updates to amdsmi_asic_info_t structure to include:
target_graphics_version, kfd_id, node_id, partition_id
- Updates to amd-smi static --asic to display new
samdsmi_asic_info_t fields
- Updates to gpu enumeration during amdsmi_init()
to discover all logical GPUs when in a non-SPX mode
(ex. DPX, TPX, QPX, or CPX)
- Updates to amdsmi_get_gpu_bdf_id(..) to include
partition_id details when in BDF or optional bits.
- bits [63:32] = domain
- bits [31:28] or bits [2:0] = partition id
- bits [27:16] = reserved
- bits [15:8] = Bus
- bits [7:3] = Device
- bits [2:0] = Function (partition id maybe in bits [2:0]) <-- Fallback for non SPX modes
- C++/Python tests updated to reflect these outputs
Change-Id: I4be0ea35bb98f3109ae2ca9e82f6b21baa38de29
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
1. Add a API interface amdsmi_topo_get_p2p_status to retrieve
connection type and P2P capabilities between 2 GPUs.
2. Add getting p2p status test in hw_topology_read
to print P2P capability information.
3. Add below tables for cli topology sub commands:
- CACHE COHERANCY TABLE
- ATOMICS TABLE
- DMA TABLE
- BI-DIRECTIONAL TABLE
Change-Id: I199173030d4170115cea27c472958a4826e4e1bf
Signed-off-by: Tim Huang <tim.huang@amd.com>
number of compute units `amdgpu_gpu_info.num_of_compute_units` is exposed through amdsmi_get_gpu_asic_info().
Code changes related to the following:
* API
* CLI
* Unit tests
* Examples
Change-Id: Ibeb612d079ed87437a0e56124b8504098fc2dcfd
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
GPU Metrics info `gpu_metrics.vcn_activity` is exposed through amdsmi_get_utilization_count().
Code changes related to the following:
* API
* CLI
* Unit tests
Change-Id: I831b2a81bdc0e090a6698dcb689d10f91ed87dd9
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
The environment variable RSMI_MUTEX_THREAD_ONLY=1 to enable thread only mutex.
The RSMI_INIT_FLAG_THRAD_ONLY_MUTEX can also be pass to rsmi_init()
to enable thread only mutex.
Change-Id: I2d9844039b774e386f03bb9bb130d8c342504ea6
Pryor, Adam
Poag, Charis
Maisam Arif
Mario Limonciello
Bindhiya Kanangot Balakrishnan
Galantsev, Dmitrii
Mario Limonciello (AMD)
Pham, Gabriel
Liu, Shuzhou (Bill)
Narlo, Joseph
Daniel Oliveira
Castillo, Juan
Eisuke Kawashima
Tim Huang