Explicitly free the user buffer ptr before test's tear down. Otherwise
the svm_bo object will never be released, causing a BUG error. Due to
a late callback to svm_migrate_page_free when prange not longer exist.
Also did cosmetic adjustments.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I989c62de8a9634faa84e42def956cecb3f84e329
Since it's shader-based, the GFX9 shader won't work for GFX10. Blacklist
it for now until we move to a more ASIC-agnostic shader
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I353e9a3fe8c7ba6f33556e39c7e4f6b36e010480
The shader is incompatible with gfx1030, so blacklist it there until we get
to some more ASIC-agnostic shader generation
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I71f362a80e6e8f87ecece6afa6b34a5f02bc56bf
This test requires KFD patch "drm/amdkfd: SVM map to gpus check vma
boundary" to pass, the patch is on staging-dkms branch, not land on
mainline branch. Temporary blacklist this to unblock QA, as QA reports
kfdtest failure.
Change-Id: I00515cd5d5d1c5612f4f8d48605d86f4a7e62ce2
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
After adjusting the memory usage, re-enable KFDEvictTest.BasicTest on
gfx906 and KFDEvictTest.QueueTest on GFX10
Change-Id: I401e679e447f3150241078154635f0b30692513d
Signed-off-by: Kent Russell <kent.russell@amd.com>
We were hitting memory map errors and segfaults when trying to use 7/8
VRAM on certain cards (dmesg showing "Failed to map to gpu 0/1"), as the
original check didn't see if this would exceed the GTT size.
Allocate the smaller of 1/3 of SRAM or 7/16 of VRAM (7/8 / 2) for the
tests
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: Ic11a5cee058535418eef903a28846e00e1839969
SDMA firmware of gfx902 has a regression which causes cp hang
in kfdtest, blacklist related test cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: Ie75b72a952a29d6b1394c5fcb67ff9a5143b3b07
This was never validated on GFX10, so remove it for now until it's
either validated and confirmed, or move the check to the test itself
Change-Id: Ie4d8b31885fbe6e5ed84b7b174c0bfed60879741
Map readonly range to GPU, test GPU can read range but write to
range trigger GPU vm fault.
Change-Id: Id2ce106055a353f21f4c34fa7f562d546523bc49
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
To test if SVM support address mmap on file backed memory.
Change-Id: I227cc0b44d167c4fa2e63257e13a481aefa4f750
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Update KFDCWSRTest.BasicTest to run CWSR test with legacy HWS,
MES, and software scheduler.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: I09af904507109c2bbbace6ff616a57fa2b1b8aa9
This is reported as failing on pretty much every ASIC, so move it to the
temporary exclude list for all ASICs until the test can be fixed.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I2973feb5705c178db32009e4603376d1f5e94a2f
Some g_system and Node ID checks already performed by validate_nodeid().
Fixes bug where hsaKmtGetNodeProperties() would return on
validate_nodeid() error without releasing lock. Switches some
conditionals to return INVALID_NODE_UNIT instead of INVALID_PARAMETER if
NodeId >= NumNodes. Removes some g_system assertions to return error
code rather than trigger a hard fault.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Id1604b20c2cef8808b98cdad61bd47aa7ea3d229
hsaKmtAllocMemory with mflags.HostAccess=1 will fail on desktop gfx1xxx GPU
because it's small bar PCIe. Remove this flag.
Child process exit status should use current_test_info, not unit test
info.
Change-Id: I060f23aa98a42251921d003878e70a409c92a4de
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Parent process alloc memory with specific HsaMemFlags, child process
import the memory handle exported by parent process, query shared memory
pointer info, verify it has same HsaMemFlags.
If child process test failed, exit with error code to notify parent
process.
Change-Id: I5c9534e931b4565186d27124868799b893504c81
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Test if query userptr pointer info return correct alloc flags,
CoarseGrain by default.
Test if query hsaKmtAllocMemory pointer info return correct alloc
CoarseGrain flags.
Change-Id: If3a1175645717e5d7c475d6ff35b02d6876a1f7c
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Register graphics memory should always coarse grain.
Change-Id: I9d056b41287fa63247a042e5530ba29d535173ea
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
The debugger and debug agent no longer use the Thunk API.
Remove all deprecated functions and keep commented
references for future KFD tests.
Update and the keep the version checks for future use
and hsaKmtRuntimeEnable/Disable.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Change-Id: Ia2f10d82f5ac36d0bd1bda233810f26e8a154d55
If the devices aren't peer-accessible, we shouldn't try to run a test
that requires that the devices be peer-accessible. Thus, add a check in
MapVramToGPUNodesTest to check for peer accessibility before executing
the peer mappings.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: Ib79b141f8c1ac6d85f5ab49d62af62ec10b988b7
Test Thunk multiple threads register and deregister same userptr race
condition, to emulate application register same userptr to multiple
GPUs using multiple threads.
Use thread barrier to sync the threads, to start register userptr at
same time.
Change-Id: I6723dc39f75908026fa14a490e39e1fe49a13a1b
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Limit test buffer size to 3/4 total VRAM size, and max 1GB.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Change-Id: I937e10b0a6bd8215e3865b50f22ce75b3982a6f7
This is causing PSDB/OSDB failures so disable it until investigation is
done
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I666cd45fdf8ae585486adc7cf43eacd1700704bb
To test ACCESS_IN_PLACE GPU mapping update to system memory.
Change-Id: I5b990215f39692e829128d848125e1ae0d571e03
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
move blacklisted test case from gfx902 iommuv2 to dgpu path.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: I8b101226ca8dcd0c12c484f5f6ce12fe73a75bdc
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
(cherry picked from commit 9cf4377572321396225950b9a58beb549120c2a3)
blacklist some svm related test cases until they are solved.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: I05e2d965d89bcbf3d43bed2873297e98ad0738ef
It needs to skip LocalMemoryTest because it doesn't support local memory
with no dgpu path.
Change-Id: Iedb6f6deba55e239b21747d933cf2d7005623106
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
The updated sp3 compiler does not support GFX10 temperaly.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Change-Id: Idd9336663814b7925d9742eee0bd310d00945d3e
Fixes assembler error. The SP3 backend if already set to FamilyId.
Change-Id: I7721a555b05688b16993a03242a765694594825a
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Increasing the timeout will avoid some test failures. This shouldn't
mask any issues as any incomplete shaders should still hang and would
just time out at 180 sec instead of 120 sec.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: If4e893ab80d9d159bd0b8b112aa7574abc5e4f44
amdgpu_cs_submit can fail intermittently if another process has too much
memory reserved at the time. Allow a small percental of command
submissions to fail to make the test more robust.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: If9f62b2b6f67be71420016d4e38d4dd6b6bca9a5
Delayed page faults from a terminated process can be attributed to the
next process with the same PASID. Work around that by adding a delay
after the Exception tests to allow the kernel to clean up any fault
storms before the next test.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: Id310c13ea9eb92b04d37b95d91a0dd60bd9954e5
If the signal arrives too late, it interrupts waitpid. Handle this
situation gracefully.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: If4925c352c81ba7fef8a940460b91f5e720b451e
After unregistered memory is added, now default access attribute
is returned based on xnack configuration.
Change-Id: I8ef44fe1e165ba009622e8112436c1f7a683f6cb
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
It is to address gfx90a HW memory model changes.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Change-Id: Ie5c5c5ee5ddfb75c0b4f625baf59ce37b4cc7c31
KFDSVMEvictTest.QueueTest shader asm code need update to support gfx10
and gfx9, skip the test to unblock CI test.
Change-Id: Id2842127cf5fc98a652afa82035a4b3603bf5c33
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Fixes assembler error. The SP3 backend if already set to FamilyId
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Change-Id: If127a71693b293e2748b06efb668a359b939cd14
gfx10 GPUs such as gfx1030 need new assembly code to test
the GWS. Removed scalar stores and added proper usage of DLC and
VSCNT waits. Removed gfx9-specific assembler meta-values.
Change-Id: I2bbdb77692ace2dba10997f721ba9decaa9be82a
KFD changes are ready, all SVM tests should pass now. Skip SVM tests if
the SVM API is not supported.
Change-Id: I5e358565a0458eea45eae0aaf4969ce3a36574a7
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Sierra <Alex.Sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
These are failing as well, due to the SP3 shader merge. Blacklist them
as well to avoid more segfaults
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I07e142a1aad9b2a5304230f333eeaf4392bea4b7
Alex Sierra
Kent Russell
Philip Yang
Yifan Zhang
Mukul Joshi
Graham Sider
changzhu
Icarus Sparry
Jonathan Kim
Aaron Liu
Chengming Gui
Mike Li
Felix Kuehling
Eric Huang
Harish Kasiviswanathan
Joseph Greathouse