- Updates:
- Adding the following metrics to allow new calculations for violation status:
- Per XCP metrics gfx_below_host_limit_ppt_acc
- Per XCP metrics gfx_below_host_limit_thm_acc
- Per XCP metrics gfx_low_utilization_acc
- Per XCP metrics gfx_below_host_limit_total_acc
- Increasing available JPEG engines to 40. Current ASICs may not support all 40. These will be indicated as UINT16_MAX or N/A in CLI.
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Co-authored-by: Charis Poag <Charis.Poag@amd.com>
Update amdsmi_interface.py
Typo at line 1744:
was: "drm_card": _validate_if_max_uint(enumeration_info.drm_render, MaxUIntegerTypes.UINT32_T),
changed to: "drm_card": _validate_if_max_uint(enumeration_info.drm_card, MaxUIntegerTypes.UINT32_T)
changed from drm_render to drm_card
Signed-off-by: AL Musaffar, Yazen <Yazen.ALMusaffar@amd.com>
Added enumeration mapping for
- drm render
- drm card
- hsa id
- hip id
- hip uuid (rocminfo uuid)
Signed-off-by: AL Musaffar, Yazen <Yazen.ALMusaffar@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
Change Versioning Scheme to match https://semver.org/
Dropping the year enum and API fields in a future release.
Should not impact library versioning since we are now starting from 25.2.0
---------
Signed-off-by: Joseph Narlo <joseph.narlo@amd.com>
Co-authored-by: Arif, Maisam <Maisam.Arif@amd.com>
Change-Id: Id090e23f156926d08f9c0b781447388adf268cf6
Changed amdsmi_get_rocm_version() to be an API in the python library only.
Updated usage and version detection
Updated path detection of librocm-core.so
Updated docs to reflect both amdsmi_get_rocm_version and amdsmi_get_lib_version() do not require initialization.
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
* amdsmi: Adding Support to get hsmp Driver version
Adding Support to fetch hsmp driver version from ESmi Interfaces.
Adding Support to fetch memory bandwidth per socket.
Signed-off-by: muthusamy <muthusamy.ramalingam@amd.com>
The target_graphics_version was not formatted properly and was
showing incorrect Target Name. Corrected this by fomatting
major, minor and revision numbers.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
* [SWDEV-508173] Updates include:
- Updating py-interface to import amdsmi_get_gpu_reg_table_info and amdsmi_get_gpu_pm_metrics_info.
- Updating the ctypes from byref to pointer.
Signed-off-by: Castillo, Juan <Juan.Castillo@amd.com>
Units were off and VCLK/DCLK outputs were not coming in
properly through amdsmi_get_clk_freq()
Now we match units sent back through rsmi_dev_gpu_clk_freq_get (MHz).
CLI now shows maximum of 2 VCLK/DCLKs otherwise shows N/A if there
is no current_freq listed.
Change-Id: I8a7b66cbb5263e8d396f8568c104e1ce3512923d
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Features added:
- [SWDEV-475244] Add new interface to get max memory bandwidth
Updated API: amdsmi_get_gpu_vram_info
Updated: struct amdsmi_vram_info_t to include vram_max_bandwidth
CLI: amd-smi static --vram
- [SWDEV-488349] Add new interface for XGMI link status
New API: amdsmi_get_gpu_xgmi_link_status
CLI: amd-smi xgmi --link-status
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Change-Id: I1aa35b741136eb4f02f7ea9a95b865886273eb72
Issues include:
SWDEV-480250
SWDEV-480255
SWDEV-480248
Known issue:
`amd-smi event` has threads taking events from the same device
which, in the case of resetting gpus, makes it seem like some gpus have
reset mulitple times and other have not reset at all.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: Ic7dcc214e0366fc1532ece579d915d34d35d5407
Changes:
- [CLI] Added warning screen to AMD SMI users
setting memory partition
- [CLI] Added a progress bar time-bar for CLI sets display to 40 seconds
- [API] Updated to wait until the driver reloads with SYSFS files active
- [CLI] Now users can set or reset without providing:
amd-smi set -g all <set arguments>
or amd-smi reset -g all <set arguments>
now can directly call -> sudo amd-smi set <set arguments>
or sudo amd-smi reset <set arguments>
- [SWDEV-475712][CLI/API] Fixed target_graphics_version field
not properly displaying for older MI or Navi ASICs.
- [All APIs] Added a catch for the driver to report invalid arguments
now these APIs will show AMDSMI_STATUS_INVAL
(ex. changing to NPS8 if the device does not support it)
- [Install] Modified paths for Python install commands to support
multi-ROCm installs
Change-Id: Id11f25d68a82d23c6b2d77ccb30b51e860dd0ca7
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
* amdsmi_get_gpu_pm_metrics_info and amdsmi_get_gpu_reg_table_info
were added to python api documentation
* AmdSmiRegType added as enum
* amdsmi_get_gpu_reg_table_info reg_type changed to AmdSmiRegType
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: I57239ecf048e82226151db071e8d9299e9182647
The reset gpu partition support for both compute and memory were removed
Code changes related to the following:
* amdsmi_reset_gpu_compute_partition()
* amdsmi_reset_gpu_memory_partition()
* CLI
Change-Id: I372589074b4da172bedd39223edde18939e373ae
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
- Update the API names, parameters to return cpu handles and core
handles in the system.
- Update the amdsmi_wrapper.py.
- Update the amdsmi_interface.py to use the processor handles and
core handles API.
Change-Id: Ie24f62f345864f8b6773fdb3c6369993bca7e25b
Changes:
- amdsmi_violation_status_t now includes current accumulated/counter
values
- Tests/wrapper now include added values
- Removed ASIC references in header for host/bm alignment
- Fix violation_status->per_hbm_thrm /
violation_status->active_hbm_thrm
calculations.
Change-Id: Ic86a7cbad5198a41018f82f6b588b83158d9ba0b
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
new command includes following arguments:
- current - display the current partition information for the selected
gpu(s)
- memory - display memory partition information for the selected
gpu(s)
- accelerator - display accelerator partition information for the
selected gpu(s)
additional functionality will be added as more partition APIs are added.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: Ica86160139002ef5213d6d4b0e390670aeef01c8
amdsmi_get_link_topology_nearest() is used to retrieve
the set of GPUs that are nearest to a given device
at a specific interconnectivity level.
Code changes related to the following:
* API
* CLI
* Unit tests
* Examples
Header Unification Change: "/amdsmi/+/1122408"
Change-Id: Id0317797c652c267742513936d321677793ec634
Signed-off-by: Lang Yu <lang.yu@amd.com>
Galantsev, Dmitrii
Castillo, Juan
Poag, Charis
AL Musaffar, Yazen
Arif, Maisam
Narlo, Joseph
Mewar, Deepak
Pham, Gabriel
Ramalingam, Muthusamy
Williams, Justin
Kanangot Balakrishnan, Bindhiya
Scaffidi, Salvatore
Peter Park
Khader Basha Shaik
Lang Yu