Corrected clean_local_data error in Linux VM's while doing
amd-smi set without args.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Units were off and VCLK/DCLK outputs were not coming in
properly through amdsmi_get_clk_freq()
Now we match units sent back through rsmi_dev_gpu_clk_freq_get (MHz).
CLI now shows maximum of 2 VCLK/DCLKs otherwise shows N/A if there
is no current_freq listed.
Change-Id: I8a7b66cbb5263e8d396f8568c104e1ce3512923d
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Features added:
- [SWDEV-475244] Add new interface to get max memory bandwidth
Updated API: amdsmi_get_gpu_vram_info
Updated: struct amdsmi_vram_info_t to include vram_max_bandwidth
CLI: amd-smi static --vram
- [SWDEV-488349] Add new interface for XGMI link status
New API: amdsmi_get_gpu_xgmi_link_status
CLI: amd-smi xgmi --link-status
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Change-Id: I1aa35b741136eb4f02f7ea9a95b865886273eb72
The xgmi read and write values were displayed in KB. The numbers became
unreadable due to misalignment. So, converted read and write values to
readable units using helper function. Updated Changelog.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Change-Id: I4c90a1de8a58c29cbdf43fe3480a1546f3946673
Reason for this fix:
Navi products use vclk and dclk for both encode and decode.
On MI products, only decode is supported.
Navi products cannot support displaying ENC_UTIL % at this time.
Change-Id: I107bb761794ae4724949ac21c110b23a4f616700
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Issues include:
SWDEV-480250
SWDEV-480255
SWDEV-480248
Known issue:
`amd-smi event` has threads taking events from the same device
which, in the case of resetting gpus, makes it seem like some gpus have
reset mulitple times and other have not reset at all.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: Ic7dcc214e0366fc1532ece579d915d34d35d5407
Earlier amd-smi set was returning different outputs in Linux
and Windows. In Linux it was returning ValueError. As part of
Error Code unification, corrected this output message.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Change-Id: Iba9ddd9c5b2bed0456f303e4373f6771c93608be
Changes:
* [API] Removed checking board name, fixes for other MI ASICs
* [API] Fixed unable to restart AMD GPU, libdrm blocked
doing this operation
* [API] Added ability to unload/reload libdrm
from within AMD SMI APIs
* [CLI] Increased progress bar to change memory partition modes
to 140 seconds, since driver reload is variable per system
Change-Id: I52f227f2ab850c4a6332ff3ecdc899903b1080f1
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Changes:
- [CLI] Added warning screen to AMD SMI users
setting memory partition
- [CLI] Added a progress bar time-bar for CLI sets display to 40 seconds
- [API] Updated to wait until the driver reloads with SYSFS files active
- [CLI] Now users can set or reset without providing:
amd-smi set -g all <set arguments>
or amd-smi reset -g all <set arguments>
now can directly call -> sudo amd-smi set <set arguments>
or sudo amd-smi reset <set arguments>
- [SWDEV-475712][CLI/API] Fixed target_graphics_version field
not properly displaying for older MI or Navi ASICs.
- [All APIs] Added a catch for the driver to report invalid arguments
now these APIs will show AMDSMI_STATUS_INVAL
(ex. changing to NPS8 if the device does not support it)
- [Install] Modified paths for Python install commands to support
multi-ROCm installs
Change-Id: Id11f25d68a82d23c6b2d77ccb30b51e860dd0ca7
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Default value changed from 0 to "N/A".
Actual values for all fields will be filled out in later API
update.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: I69b08fff894a032ef79301754807ed4b5c85257f
Changes:
- [CLI] Earlier we removed compute & memory partition resets,
this fix changes back to the correct spacing for
reset commands
Change-Id: I707ff197baf7a32bfb7ef20f2b26a63acd13f08a
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Changes:
- Corrected max speed users can sample from FW/driver
is 100 ms
- Added warning to amdsmi_get_violation_status()
call on delay required 100ms to sample
- Removed guest support, this API will not be supported
- Updated CLI `amd-smi metric --throttle` outputs from
XXX_active -> XXX_status
XXX_percent -> XXX_activity
to align with host
- Changelog updated
Change-Id: Ib30dd35dcc04ff67904ca82c86a55a16689df226
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
The reset gpu partition support for both compute and memory were removed
Code changes related to the following:
* amdsmi_reset_gpu_compute_partition()
* amdsmi_reset_gpu_memory_partition()
* CLI
Change-Id: I372589074b4da172bedd39223edde18939e373ae
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Changes:
- amdsmi_violation_status_t now includes current accumulated/counter
values
- Tests/wrapper now include added values
- Removed ASIC references in header for host/bm alignment
- Fix violation_status->per_hbm_thrm /
violation_status->active_hbm_thrm
calculations.
Change-Id: Ic86a7cbad5198a41018f82f6b588b83158d9ba0b
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
new command includes following arguments:
- current - display the current partition information for the selected
gpu(s)
- memory - display memory partition information for the selected
gpu(s)
- accelerator - display accelerator partition information for the
selected gpu(s)
additional functionality will be added as more partition APIs are added.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: Ica86160139002ef5213d6d4b0e390670aeef01c8
Small change to add sudo modprobe amdgpu/amd_hsmp suggestion if modules are not loaded. Requested per Maisam, will close https://github.com/ROCm/amdsmi/issues/45
Change-Id: Ia7ffcc99df18296c5c682f2082ff8dd8f007d557
partition_id also removed from the `amdsmi_asic_info_t` struct and
supporting API has been added for querying partition information.
Signed-off-by: gabrpham <Gabriel.Pham@amd.com>
Change-Id: Id5a6291a77d11bb97a1c7a200fc465898e86e081
amd-smi event is failing to exit as it waits for all threads to complete before exiting. Each thread has to listen for a maximum of 10 seconds prior to exiting in the current implementation.
Lowered individual listen time for _event_thread allowing for a quicker exit while still capturing all events (Looped until escape sequence detected).
Added logging for escape character, not sure if needed but helps confirm that key press was registered.
Change-Id: I916608754798f966980a558342c7c62693252d7f
1. Add a API interface amdsmi_topo_get_p2p_status to retrieve
connection type and P2P capabilities between 2 GPUs.
2. Add getting p2p status test in hw_topology_read
to print P2P capability information.
3. Add below tables for cli topology sub commands:
- CACHE COHERANCY TABLE
- ATOMICS TABLE
- DMA TABLE
- BI-DIRECTIONAL TABLE
Change-Id: I199173030d4170115cea27c472958a4826e4e1bf
Signed-off-by: Tim Huang <tim.huang@amd.com>
Driver info `amdgpu_gpu_info.vram_bit_width` is exposed through amdsmi_get_gpu_vram_info().
Code changes related to the following:
* API
* CLI
* Unit tests
* Examples
Change-Id: I8abd8db7a603078b2b1c008b2685cecf35caf3d2
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Kanangot Balakrishnan, Bindhiya
Poag, Charis
Scaffidi, Salvatore
gabrpham
Juan Castillo
Maisam Arif
Joe Narlo
Harkirat Gill
Eisuke Kawashima
Tim Huang
Oliveira, Daniel