Updates:
* VoltRead - needed to properly send out RSMI_STATUS_NOT_SUPPORTED
when device does not have voltage hwmon files
* ComputePart. - test failure was likely caused due to EvtNotif
causing conflicts (unknown exactly why). Test passes when
moving it ahead of the event notifier. Both API calls may have
a system resource issue, TBD.
* rocm_smi_example - now indicates when an API call
returns RSMI_STATUS_NOT_SUPPORTED or
RSMI_STATUS_NOT_YET_IMPLEMENTED. Allows example to fully complete
on systems which may not provide support for all API calls.
Change-Id: I520b8584e078d412414e8e5797c664220a7e823a
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Updates:
* Fixed rsmi_dev_compute_partition_get
& rsmi_dev_nps_mode_get to properly check
for invalid arguments
* Updated compute partition & NPS mode tests
- Now properly confirms the invalid
argument is seen
- Spacing for multiple devices is added
to better see distinction between
separate device's tests (for verbose output)
- Changed expect to assert calls, so errors
are observed faster for test failures
- Fixed multiple device testing where a
variable should have been unset, but
having multiple devices caused it to
set
- Updated multiple device testing to iterate
accross all devices (previously returned,
instead of continuing checking support
after RSMI_STATUS_NOT_SUPPORTED detected)
- Fixed a few spelling errors & verbose output
Change-Id: Ieba9e5b46763c6cd880fbf27fcdf58be8ecbc683
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Updates:
* Added RSMI_STATUS_SETTING_UNAVAILABLE for
rsmi_dev_compute_partition_set - gives users
better error output when attempting to set
compute partition to values not listed in
available_compute_partition SYSFS
* Updated python --setcomputepartition to
provide better output when receiving
RSMI_STATUS_SETTING_UNAVAILABLE
* Updated all test & example files to check for
RSMI_STATUS_SETTING_UNAVAILABLE when doing
rsmi_dev_compute_partition_set
Change-Id: Ida5d54880d9b9b6e4a0468cdb962fdc0c18d6257
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Updates:
* Added rsmi_dev_compute_partition_reset & rsmi_dev_nps_mode_reset
* Added --resetcomputepartition and --resetnpsmode python smi calls
* Added temp data files rocmsmi_boot_compute_partition_<device num>
& rocmsmi_boot_nps_mode_partition_<device num>, writes UNKNOWN
if data cannot be read or device does not support
* Cleaned up NPS & compute API documentation
* Added creation and reading of API temp files (used in reset
functionality)
* Cleaned up output of rocm_smi_example
* Updated rocm_smi_example to check if running with sudo permission
before executing write API calls (cleans up erroneous output)
* Added template specialization for storing temp data, requires
specific rsmi_type_t enums (restrics what data can be stored)
* Added storage of temp data, if temp files do not exist
* Updated google tests for NPS & compute to include reset API calls
Change-Id: I69895a466b97107617e6dbb355737b84499a76c9
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Updates:
* Added rsmi_dev_nps_mode_set and rsmi_dev_nps_mode_get
* Added ability to set multiple SYSFS files in debug build
* Added ability to see user's env variables set for debug build
* Added tests for rsmi_dev_nps_mode_set and rsmi_dev_nps_mode_get
* Added ability to restart AMD GPU driver, used in nps_mode_set
* Updated ROCm_SMI_Manual.pdf to include new APIs
* Added progress bar for long running python_smi_tools, used
in setting nps_mode if runs longer than .1 seconds
Change-Id: I6d61bedd28d7cba6aff432ad2d127ba741b7d15a
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Original updates:
* Added .gitignore to help with future commits
* Updated/added copyrights on modified or added files
* Updated rocm_smi.h/.cc
- Added 3 new SMI API functions:
rsmi_dev_compute_partition_set &
rsmi_dev_compute_partition_get
- Added helpful maps/enums used in
new get/set compute_partition API calls
* Updated rocm_smi.py
- Added --showcomputepartition
- Added --setcomputepartition
- Fixed a few mistypes
* Updated rsmiBindings.py - added helpful class/dict/list
* Updated rocm_smi_example.cc
- Added helpful MACRO to detect if api is not supported.
- Added current_compute_partition set/get rocm lib calls
- Added helpful macro to discover future RSMI errors
- Commented out test_set_freq, was having permission issues
on a Navi21
* Updated rocm_smi_main.cc
- Added helpful map to debug API calls, left in for future use
- Added comment to better understand a non-class function returns
* Added computepartition_read_write.cc/.h
- Added get/set compute partition API test calls
- Confirmed on devices that do not support the API calls, tests pass
* Updated rocm_smi_test/main.cc
- Calls new compute partition gtests
Added following updates from review feedback:
* Updated rocm_smi.h/cc
- Removed C++ API calls, adding support for both C/C++
API calls could cause confusion and adds extra work for us
- rsmi_dev_compute_partition_get -> Fixed an edge case where
user gives a small buffer length size (smaller than data
received), but does not receive the partial buffer back.
google Tests are updated to reflect this find.
* Updated rocm_smi_example.cc
- Fixed test_set_freq, issue was that file was not writable.
We now indicate this warning, so prior errors make sense.
- General test code cleanup. Removed extra code,
by creating loops for tests.
* Updated rocm_smi_main.cc
- Moved and got rid of an external reference to a map used
for debugging RSMI enums, now is a const public reference.
* Updated rocm_smi.py
- Updated python code to identify NOT_SUPPORTED due to
(currently) only a few GPU support the feature
Change-Id: I4a567acbb59d6771fb64df08d19175fe3604fd1b
Install interface should provide /opt/rocm-ver/include as the include path
Path /opt/rocm-ver/rocm_smi/include should be used only as part of backward compatibility support
Change-Id: Idc1f663069356c6b1fbd492f45ef4637fc90e4eb
Changes made on rsmi_perf_determinism_mode_set function documentation
as well for styling consistency.
Change-Id: I09ce8139eb9cbda94352ac7725c4c9b9bb06bd59
Use GNUInstallDirs variables to determine the location of LIBDIR, BINDIR, INCLUDEDIR, DOCDIR
Note that CMAKE_INSTALL_LIBDIR is overriden, since the default for RHEL
is lib64, but ROCm packaging wants it to be lib always. Distros or users
can easily override this.
Change-Id: I616152ccd2bc1f5a60bffa940312b38ca6e88c04
Wrapper header files
Soft link to libraries and binaries
rocm_smi.py and rsmiBindings.py installed in libexec/rocm_smi
Binaries, libraries and header files installed as per File Reorg folder structure
Change-Id: I3166ab67f89c2ae4aafbc87bb00c9a5233221ade
README should be at root to display in github main page.
Also, removed paragraph related to API changes early
in development.
Change-Id: I2e92573a31d3caa7790364de9356c6d7e7be553d
JIRA : SWDEV-234471
Changing cmake for dynamically creation of shared / archive libs depending upon the parameret to cmake
Adapted comments.
Change-Id: Ice5925719b8c307c32310b252f61cbc211d1af27
Also:
* fix doxygen manual generation that was altered during
OAM refactor
* quiet some compile warnings.
Change-Id: I548a3cf00eb887bea3dbf58e362ca6dfe90bde28
This corrects issues that arose after OAM reorganization.
It should address SWDEV-243294.
Also, fix some compile warnings that show up on RHEL.
Change-Id: Id14d444905da35cd7346bcfbcd82b6d0572708c4
Hao Zhou
Sam Wu
Charis Poag
AravindanC
Ranjith Ramakrishnan
Sreekant Somasekharan
Kent Russell
Bill(Shuzhou) Liu
Chris Freehill
Divya Shikre
Ashutosh Mishra