- Changed amd-smi static --vbios to accept ifwi
- Change population logic for vbios version API
- Added IFWI boot_firmware to the CLI, C++, Rust, and Python API
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Change-Id: I4ea504d40a43cfb011ab38fc9a664ecf12d39c8a
Increased the AMDSMI_MAX_DEVICES to 64 to accomodate all
devices in CPX mode. The link type has been modified in
amd-smi to match with rocm-smi types, updated the same
for drm tests.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
* [SWDEV-531904] Unit and Integ Test Updates
Updated: unit_tests.py
- Removed redundant self.setUp() and self.tearDown() calls.
- Removed test_free_name_value_pairs() since is internal only.
Updated: integration_test.py
- Added logic to set AMDSMI_CLI_PATH from environment or default.
- Raise FileNotFoundError if path does not exist.
- Append CLI path to sys.path and handle ImportError with a clear message.
- Removed redundant @handle_exceptions function decorator.
- Removed redundant self.setUp() and self.tearDown() calls.
Updated: amdsmi_interface.py
- Removed POINTER conversion in amdsmi_get_gpu_pm_metrics_info() and amdsmi_get_gpu_reg_table_info()
All tests pass/skip
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
* Update tests/python_unittest/integration_test.py
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Signed-off-by: Castillo, Juan <Juan.Castillo@amd.com>
* Review Update 1
Modified: integration_test.py
- Added logic to properly loop through firmware list and display each name and version
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
* Skip xgmi_err tests + improve running output
Changes:
1. Now check for elevated permissions
2. Skip xgmi_error related SYSFS tests, refer to xgmi_read_write.cc
(both are skipped)
3. Added list of tests and provided a summary of additional output
provided
Change-Id: Iefc85c270faad89c625e2bd7af397d24faed2437
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
---------
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Signed-off-by: Castillo, Juan <Juan.Castillo@amd.com>
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Co-authored-by: Juan Castillo <juan.castillo@amd.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Charis Poag <Charis.Poag@amd.com>
- **Fixed gpuboard and baseboard temperatures enums in amdsmi Python Library**.
- AmdSmiTemperatureType had issues with referencing the right attribute, so we removed the following duplicate enums:
- `AmdSmiTemperatureType.GPUBOARD_NODE_FIRST`
- `AmdSmiTemperatureType.GPUBOARD_VR_FIRST`
- `AmdSmiTemperatureType.BASEBOARD_FIRST`
Change-Id: Ia61446b593bd9182d597c4b4c2ac3c5ffdae7493
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
* Cmake fix updates
* Next fix will be addressing libdrm further
---------
Signed-off-by: adapryor <Adam.pryor@amd.com>
Signed-off-by: Justin Williams <juwillia@amd.com>
Changes:
- This aligns back to original struct naming for ROCm 7.0. This removes
any Major ABI breakages for updates for 7.0 release.
- Minor ABI breakage is required since there were additions to the
header. Refer to changelog for these updates.
Change-Id: If35af74eac6beac8c267d05ce789b7761ed24bff
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Changes:
- Update violation status logic and metric naming for XCP/XCC metrics (thrm/thm consistency)
- Added XCP identifier in monitor to allow partition metrics to be shown with applicable APIs
(Violation Status is the first example of this in monitor)
- Improve CLI monitor output:
support multiple GPU lines per GPU, add new columns, and better formatting
- Refactor helpers and logger for flexible unit formatting and table rendering
- Add examples for amdsmi_get_gpu_pm_metrics_info()/amdsmi_get_gpu_reg_table_info()
new metrics APIs in C++ example
- Sync Python/C++ interface and structures for new metrics fields and naming
- Remove deprecated/unused RSMI activity APIs, documentation not needed since
the APIs no longer exist in ROCm SMI either.
- Cleanup metric violations + fix handle watch arguments
- Provide better handling/doc for average_flattened_ints()
- Group xcp metrics with brackets in human readable + adjust output size
Signed-off-by: Poag, Charis <Charis.Poag@amd.com>
Description:
- Added a new API `amdsmi_gpu_driver_reload()` to reload the AMD GPU driver independently.
- Updated CLI (`sudo amd-smi reset -r`) and Python bindings to support driver reload functionality.
- Removed automatic driver reload from `amdsmi_set_gpu_memory_partition()` and `amdsmi_set_gpu_memory_partition_mode()`.
- Enhanced CLI and test cases to allow users to control when the driver reload occurs.
- Updated documentation and changelog to reflect the new driver reload process.
- Improved error handling and logging for driver reload operations.
- Added progress bar and user confirmation prompts for driver reload commands.
* Update build/test strategy to only allow one test execution at a time
* Modify API verbage + modify systemctl error output
- Systemctl is typically not enabled on docker.
- And is an edge case for gpu being active process/etc for display devices.
* Remove AMDSMI_STATUS_AMDGPU_RESTART_ERR from the return values
* Move driver reload to after we save original compute partitions
---------
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Add support to Query UBB/OAM temperature.
* Updated Python API with new temperature metrics enum
---------
Co-authored-by: Bill Liu <shuzhliu@amd.com>
Co-authored-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
Changes:
- Modified outputputs for amd-smi set/reset when in partitions
to display error codes
- Provided some general cleanup for the above ^
----------------------------------------------------
- Updated `amd-smi set -o <value>` / `amd-smi set --power-cap <value>` command to
allow setting power cap to values other than 0, provided the current power cap is not 0.
- Modified power_cap_read_write.cc:
- Added a check to ensure that the power cap can only be set to non-zero values if the current
power cap is not 0.
- Reset the power cap to the original value after the test to maintain state consistency.
Change-Id: If489bb35812ba4fc4cc34723b0dc39c99926e5d7
---------
Signed-off-by: Poag, Charis <Charis.Poag@amd.com>
Moved the bit_rate and max_bandwidth back into links in the
amdsmi_link_metrics_t struct as this change was impacting
other teams. Modified the C and python API's, wrapper, and
CLI accordingly.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
The bug was reproduced like this.
In terminal #1, run command:
sudo amd-smi ras --cper --gpu 6 --severity all --folder /tmp/cper_dump --follow
In terminal #2, inject errors:
while true; do sudo amdgpuras -b 7 -s 1 -m 6 -t 2; sleep 2; done
The terminal #1 starts dumping cper entry information that it captures. After 20 entries have been captured, open terminal #3 and run same command as terminal #1:
sudo amd-smi ras --cper --gpu 6 --severity all --folder /tmp/cper_dump --follow
From terminal #3, there will be no output, even when terminal #1 continues capturing and printing information.
The fix:
Since we already have more than 20 CPER entries available in the GPU buffer, when we run the command from terminal #3 to start capturing from the beginning and pass 20 buffers to copy entries to, the C++ API returns a code saying there is more data available.
The Python CLI should not treat this as an error, but should continue to print what the API returned.
---------
Signed-off-by: Oosman Saeed <oossaeed@amd.com>
* Added copyrights
* Fixed type hinting for processor_handle in python_interface
* Fixed Incorrect type hinting to actual return types
---------
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
Change-Id: Ie2a09acf628ed0c43eacc8ec78c159d125acbcdb
* Adjusted help text
* Adjusted --afid to run only with --cper-file
* Fixed interface return error
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Change-Id: I2b96f4515c85f3b9dd84ba5c2d819729a997141b
The xgmi read and write accumulated data from gpu metric index
is based on sysfs xgmi_port_num file. Mapped these two to display
read and write wrt src_gpu Vs dst_gpu.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
The xgmi command was showing pcie bit rate and bandwidth instead of xgmi. Corrected the API to get xgmi data from gpu metric.
Added python API for amdsmi_get_link_metrics. Modified the amdsmi_link_metrics struct.
Added check to confirm non zero partition got xgmi command.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
* [SWDEV-488303] Adjusted process vram_mem data source
* Standardized sscanf format strings
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
* Add the API and CLI to show the board voltage.
---------
Change-Id: Icb25bd653bb1d004704b5a21b378ca31b2b242c7
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
Signed-off-by: AL Musaffar, Yazen <Yazen.ALMusaffar@amd.com>
* Update to remove vram enum and instead use the string directly from the driver.
Signed-off-by: Narlo, Joseph <Joseph.Narlo@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
feat: Report PLDM Bundle from SMC to IB
Code changes related to the following:
* APIs
* CLI
* Unit tests
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Change-Id: I35ccf01eb612ca80e3ae6b72039085c18c989222
Maisam Arif
Kanangot Balakrishnan, Bindhiya
3049ac537468bd90fe07f2cbb3d7a83e_amdeng
Charis Poag
Pham, Gabriel
Liu, Shuzhou (Bill)
Castillo, Juan
Narlo, Joseph
Saeed, Oosman
Pryor, Adam
Daniel Oliveira
Mewar, Deepak