* Updated groups printing
* added parameters to check_required_groups
* two device groups since kfd and render require the same group
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
Added the following API's to amdsmi_interface.py.
amdsmi_get_cpu_handle()
amdsmi_get_esmi_err_msg()
amdsmi_get_gpu_event_notification()
amdsmi_get_processor_count_from_handles()
amdsmi_get_processor_handles_by_type()
amdsmi_gpu_validate_ras_eeprom()
amdsmi_init_gpu_event_notification()
amdsmi_set_gpu_event_notification_mask()
amdsmi_stop_gpu_event_notification()
amdsmi_get_gpu_busy_percent()
Added additional return value to API amdsmi_get_xgmi_plpd().
The entry policies is added to the end of the dictionary to match API definition.
The entry plpds is marked for deprecation as it has the same information as policies.
---------
Signed-off-by: josnarlo <Joseph.Narlo@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
* Update amd-smi doc with examples of CPER and AFID API usage.
---------
Signed-off-by: Oosman Saeed <oossaeed@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Changes:
- Update violation status logic and metric naming for XCP/XCC metrics (thrm/thm consistency)
- Added XCP identifier in monitor to allow partition metrics to be shown with applicable APIs
(Violation Status is the first example of this in monitor)
- Improve CLI monitor output:
support multiple GPU lines per GPU, add new columns, and better formatting
- Refactor helpers and logger for flexible unit formatting and table rendering
- Add examples for amdsmi_get_gpu_pm_metrics_info()/amdsmi_get_gpu_reg_table_info()
new metrics APIs in C++ example
- Sync Python/C++ interface and structures for new metrics fields and naming
- Remove deprecated/unused RSMI activity APIs, documentation not needed since
the APIs no longer exist in ROCm SMI either.
- Cleanup metric violations + fix handle watch arguments
- Provide better handling/doc for average_flattened_ints()
- Group xcp metrics with brackets in human readable + adjust output size
Signed-off-by: Poag, Charis <Charis.Poag@amd.com>
Description:
- Added a new API `amdsmi_gpu_driver_reload()` to reload the AMD GPU driver independently.
- Updated CLI (`sudo amd-smi reset -r`) and Python bindings to support driver reload functionality.
- Removed automatic driver reload from `amdsmi_set_gpu_memory_partition()` and `amdsmi_set_gpu_memory_partition_mode()`.
- Enhanced CLI and test cases to allow users to control when the driver reload occurs.
- Updated documentation and changelog to reflect the new driver reload process.
- Improved error handling and logging for driver reload operations.
- Added progress bar and user confirmation prompts for driver reload commands.
* Update build/test strategy to only allow one test execution at a time
* Modify API verbage + modify systemctl error output
- Systemctl is typically not enabled on docker.
- And is an edge case for gpu being active process/etc for display devices.
* Remove AMDSMI_STATUS_AMDGPU_RESTART_ERR from the return values
* Move driver reload to after we save original compute partitions
---------
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
The bug was reproduced like this.
In terminal #1, run command:
sudo amd-smi ras --cper --gpu 6 --severity all --folder /tmp/cper_dump --follow
In terminal #2, inject errors:
while true; do sudo amdgpuras -b 7 -s 1 -m 6 -t 2; sleep 2; done
The terminal #1 starts dumping cper entry information that it captures. After 20 entries have been captured, open terminal #3 and run same command as terminal #1:
sudo amd-smi ras --cper --gpu 6 --severity all --folder /tmp/cper_dump --follow
From terminal #3, there will be no output, even when terminal #1 continues capturing and printing information.
The fix:
Since we already have more than 20 CPER entries available in the GPU buffer, when we run the command from terminal #3 to start capturing from the beginning and pass 20 buffers to copy entries to, the C++ API returns a code saying there is more data available.
The Python CLI should not treat this as an error, but should continue to print what the API returned.
---------
Signed-off-by: Oosman Saeed <oossaeed@amd.com>
* Adjusted help text
* Adjusted --afid to run only with --cper-file
* Fixed interface return error
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Change-Id: I2b96f4515c85f3b9dd84ba5c2d819729a997141b
* fix endian problem
* use hw_revision and flags_mask from cper section instead of hardcoded values
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
* show afids on each line of printout
* clean up afids and cper code
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
(#280)
- Fixed potential issue with min/max values when only one frequency is available
- Improve error handling in GPU frequency range detection
- Refactor clock frequency range detection for better readability
- Added special handling for current frequency indicator (*) in DPM output
- Added comments explaining special case handling for current frequency
- Cleaned up incorrect definitions in hsmp metric table definition
---------
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
* Changes:
- Updates to DRM renderD* / card* pathing for partition
- Now use KFD to discover AMD devices and populate accordingly
Device MUST have an accessible KFD node (via cgroups)
- Updated serveral AMD SMI CLI outputs to handle SYSFS files
which are not accessible on partition nodes
- Tests are updated to handle not supported features
- Added new method to help get card/drm info
(rsmi_dev_device_identifiers_get) from ROCm SMI
- Renamed device->get_card_id() & device->get_drm_render_minor()
These can now be used on internal AMD SMI calls.
- Removed warnings shown in build
Change-Id: Ice882fd9b97fb625a5bd4ef327f3ceaf247dc570
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Changed amdsmi_get_rocm_version() to be an API in the python library only.
Updated usage and version detection
Updated path detection of librocm-core.so
Updated docs to reflect both amdsmi_get_rocm_version and amdsmi_get_lib_version() do not require initialization.
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
Features added:
- [SWDEV-475244] Add new interface to get max memory bandwidth
Updated API: amdsmi_get_gpu_vram_info
Updated: struct amdsmi_vram_info_t to include vram_max_bandwidth
CLI: amd-smi static --vram
- [SWDEV-488349] Add new interface for XGMI link status
New API: amdsmi_get_gpu_xgmi_link_status
CLI: amd-smi xgmi --link-status
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Change-Id: I1aa35b741136eb4f02f7ea9a95b865886273eb72
The xgmi read and write values were displayed in KB. The numbers became
unreadable due to misalignment. So, converted read and write values to
readable units using helper function. Updated Changelog.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Change-Id: I4c90a1de8a58c29cbdf43fe3480a1546f3946673
Changes:
* [API] Removed checking board name, fixes for other MI ASICs
* [API] Fixed unable to restart AMD GPU, libdrm blocked
doing this operation
* [API] Added ability to unload/reload libdrm
from within AMD SMI APIs
* [CLI] Increased progress bar to change memory partition modes
to 140 seconds, since driver reload is variable per system
Change-Id: I52f227f2ab850c4a6332ff3ecdc899903b1080f1
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Changes:
- [CLI] Added warning screen to AMD SMI users
setting memory partition
- [CLI] Added a progress bar time-bar for CLI sets display to 40 seconds
- [API] Updated to wait until the driver reloads with SYSFS files active
- [CLI] Now users can set or reset without providing:
amd-smi set -g all <set arguments>
or amd-smi reset -g all <set arguments>
now can directly call -> sudo amd-smi set <set arguments>
or sudo amd-smi reset <set arguments>
- [SWDEV-475712][CLI/API] Fixed target_graphics_version field
not properly displaying for older MI or Navi ASICs.
- [All APIs] Added a catch for the driver to report invalid arguments
now these APIs will show AMDSMI_STATUS_INVAL
(ex. changing to NPS8 if the device does not support it)
- [Install] Modified paths for Python install commands to support
multi-ROCm installs
Change-Id: Id11f25d68a82d23c6b2d77ccb30b51e860dd0ca7
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Poag, Charis
Pryor, Adam
Bindhiya Kanangot Balakrishnan
yalmusaf_amdeng
Narlo, Joseph
Saeed, Oosman
Oosman Saeed
Maisam Arif
Deepak Mewar
Castillo, Juan
Pham, Gabriel