* Adjusted help text
* Adjusted --afid to run only with --cper-file
* Fixed interface return error
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Change-Id: I2b96f4515c85f3b9dd84ba5c2d819729a997141b
* fix endian problem
* use hw_revision and flags_mask from cper section instead of hardcoded values
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
The amd-smi partition --json output was not in valid json
format. Changes are done to get the output in valid
json format.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
The amd-smi xgmi --json output was not in valid json
format. Changes are done to get the output in valid
json format.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
* show afids on each line of printout
* clean up afids and cper code
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
The xgmi read and write accumulated data from gpu metric index
is based on sysfs xgmi_port_num file. Mapped these two to display
read and write wrt src_gpu Vs dst_gpu.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
The xgmi command was showing pcie bit rate and bandwidth instead of xgmi. Corrected the API to get xgmi data from gpu metric.
Added python API for amdsmi_get_link_metrics. Modified the amdsmi_link_metrics struct.
Added check to confirm non zero partition got xgmi command.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
- When in json output mode the .rstrip function does not work due to dict obj type.
- The clk_value is now checked for dict instance before extracting the value.
- If clk_value is a dict then the .get() function is used to extract the value.
- Else it is a string obj which uses .split() to extract the value.
- If clk_value is < min_clk_value then deep_sleep is set to ENABLED
- initialize clk_value and min_clk_value to 0 for each loop.
- fix if/else for better readability
---------
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
* Add the API and CLI to show the board voltage.
---------
Change-Id: Icb25bd653bb1d004704b5a21b378ca31b2b242c7
Signed-off-by: Arif, Maisam <Maisam.Arif@amd.com>
Signed-off-by: AL Musaffar, Yazen <Yazen.ALMusaffar@amd.com>
* Added degree symbol and fixed power usage
* Added degree symbol and fixed power usage
* fixed default command
---------
Signed-off-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
* Update to remove vram enum and instead use the string directly from the driver.
Signed-off-by: Narlo, Joseph <Joseph.Narlo@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Changes:
- Updated references in the codebase to rename `COMPUTE_PARTITION` to `ACCELERATOR_PARTITION`
- Moved around and rephrased several duplicated lines in the CHANGELOG.md file
Change-Id: Id6bc86a7133e952cca6ef0acb1616ad6251d19d4
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
- Updated VCLK and DCLK min/max clock logic to populate N/A values.
- Updated VCLK and DCLK to show all available clocks.
- Updated deep_sleep logic using sys/fs clk_deep_sleep true/false.
- Added clarifying comments.
- Updated error output using e.get_error_info() instead of just error.
- Updated changelog
---------
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
* Do not raise excepction for cper status not found, but keep iterating to next gpu
* Do not raise excepction for cper status not found, but keep iterating to next gpu
* use partition id and skip if non-zero
* reverting un-needed change
* Do not raise excepction for cper status not found, but keep iterating to next gpu
* use partition id and skip if non-zero
---------
Co-authored-by: Oosman Saeed <oossaeed@amd.com>
Earlier, the amd-smi metric and static json output
was not in valid json format. Changes are done to
get the output in valid json format.
---------
Change-Id: I5576333269509f63b3c800f225c3d73127ce80cf
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
* Small Fixes
* CLI Help text and parser formatting updates
* Changed metavar for set partition
---------
Change-Id: Ia8809665f6fac670452cd4db4e5e8f9c7270faba
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Signed-off-by: Pham, Gabriel <Gabriel.Pham@amd.com>
Co-authored-by: Pham, Gabriel <Gabriel.Pham@amd.com>
* Reduced Load times for CLI in partition mode
* Change rsmi_dev_id_get() to use KFD, if KGD interface does not exist
* Make gpu_device_uuid fallback to rsmi_wrapper
* Moved Enumeration info calls in list for more speed
* Moved made group check excluded from recursion
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Co-authored-by: Charis Poag <Charis.Poag@amd.com>
Co-authored-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
(#280)
- Fixed potential issue with min/max values when only one frequency is available
- Improve error handling in GPU frequency range detection
- Refactor clock frequency range detection for better readability
- Added special handling for current frequency indicator (*) in DPM output
- Added comments explaining special case handling for current frequency
- Cleaned up incorrect definitions in hsmp metric table definition
---------
Signed-off-by: Juan Castillo <juan.castillo@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
* Changes:
- Updates to DRM renderD* / card* pathing for partition
- Now use KFD to discover AMD devices and populate accordingly
Device MUST have an accessible KFD node (via cgroups)
- Updated serveral AMD SMI CLI outputs to handle SYSFS files
which are not accessible on partition nodes
- Tests are updated to handle not supported features
- Added new method to help get card/drm info
(rsmi_dev_device_identifiers_get) from ROCm SMI
- Renamed device->get_card_id() & device->get_drm_render_minor()
These can now be used on internal AMD SMI calls.
- Removed warnings shown in build
Change-Id: Ice882fd9b97fb625a5bd4ef327f3ceaf247dc570
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Added power cap to display on amd-smi monitor -p.
Updated help and Changelog as well.
Signed-off-by: Kanangot Balakrishnan, Bindhiya <Bindhiya.KanangotBalakrishnan@amd.com>
gabrpham_amdeng
Galantsev, Dmitrii
Deepak Mewar
Maisam Arif
Saeed, Oosman
Bindhiya Kanangot Balakrishnan
Narlo, Joseph
Castillo, Juan
Liu, Shuzhou (Bill)
AL Musaffar, Yazen
Poag, Charis