For new ASIC, the RDC_EVNT_XGMI, RDC_FI_PCIE_RX and RDC_FI_PCIE_TX
are not supported. New fileds RDC_FI_XGMI and RDC_FI_PCIE_BANDWIDTH
should be used.
Change-Id: Iff5bbef4c07994090fa7c4e9b319966215525283
These RUNPATH changes make it so libraries can be found without setting
LD_LIBRARY_PATH.
Mostly tested on installed RDC binaries and libraries. The
build binaries should also work.
Change-Id: Ifd908a5b61d24dfcbb1d08d21b4ee830156d8643
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
If the card does not have edge temperature, fallback to junction
temperature. If the card only have socket power, then use socket
power instead.
Change-Id: I053a67a89cf3b29a34e82123f522c08d7dd68916
Also add stddef.h workaround for old GCC.
RHEL-8 still uses GCC 8.5 and templates are not well supported.
Change-Id: Ia4dae23892ec63682ea848c46ba81de85cf6d209
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
NOTE: RVS Build is disabled by default due to CI build issues.
Change-Id: I1593f0fe22075a9f86f54afa3ac151e109f1f7bd
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
The rocm-smi index is changed to sort based on BDF. The rocr plugin
is also changed based on that.
Change-Id: I5851431db336d50266b253dec1894a7bd9f3554b
Rebuild rdc_ras library on Ubuntu 20.04 for backward compatibilities.
Fallback to rocm_smi for ECC errors if rdc_ras library not available.
Change-Id: I8db9687e3eb54a6f62fce2c8d57a796c6da6b5c4
* Move hsa_init out of rocmtools and into RDC
* Remove secondary hsa_shut_down from ROCR module
Change-Id: I57d84d41ddc51595b98e734265f10bc5129a7352
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Depends-On: I2b389ee1a9ba3507b2df1fc2fe83598f67731aac
- Replace gRPC library with gRPC package
- Relax RUNPATH
- Make LINKER_FLAGS global
gRPC package includes its dependencies:
SSL, UPB, ABSL, and etc.
Change-Id: Ieb198ad96e26e89b09cb85986214a5b1451b17a6
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
This commit adds integration with ROCmTools
Additional changes:
- Fix DEB and RPM installation issue when systemd is not present
- Fix typos in rdc.h
- Wrap negative values in parentheses in rdc.h
- CMAKE: Improve rocm_smi searching
- README: Improve formatting, add info about ROCmTools
Metrics added: 700-714
Metrics can be listed with `rdci dmon --list-all`
Majority of the metrics are only supported by Instict (MI) series GPUs
700 RDC_FI_PROF_ELAPSED_CYCLES should be available on most devices
See README for more information
Change-Id: I907d3eacdc92fc5588ca6c76c2fa1ce0ad900770
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
- Respect CMAKE_INSTALL_PREFIX and ignore RDC_CLIENT_INSTALL_PREFIX
- Move example and rdctst from rocm/bin to rocm/share/rdc
- Add README for examples
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Change-Id: I0b1d996d206327fd1b51ac6e82d548829bdb1570
Main CMake improvements:
* Add rdctst with -DBUILD_TESTS=ON
* Set default ROCM_DIR to /opt/rocm/
* Split rdc_libs/CMakeLists.txt into subdirectories
* Package tests into rdc-tests.deb and .rpm
Misc improvements:
* Add .editorconfig to normalize code formatting
* Add .gitignore
* Expand RPATH for gRPC to reduce LD_LIBRARY_PATH usage
* Export compile_commands.json
* Show warning and do not install gRPC if GRPC_ROOT is left as default
* Move .in files into relevant subdirectories
* Move most variables into project CMakeLists.txt to avoid redefinitions
* Normalize CMakeLists.txt formatting (4 spaces indentation)
* Rename DIAGNOSTIC_LIB to RDC_ROCR_LIB
* Update gRPC version in README to 1.44.0
* Remove gtest source
* Pull gtest from github if not installed
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Depends-On: I1039ef61247e3f0ff822925cc869fb0c2bf3af85
Change-Id: I879b21428e6642f19fda67092b365d8b78b7ba7b
SWDEV-291455 - Binary , header files and libraries installed in bin,include and lib folder under /opt/rocm-ver
Prebuilt ras library with updated search path
cmake config files in lib/cmake/rdc
grpc,sp3,hsaco and private libraries installed in lib/rdc
config installed in share/rdc
authentication and python_binding installed in libexec/rdc
Backward compatibility added for header files and libraries
Depends-On: I3f3d192935923f71737b3fe55ded536654a73dd7
Change-Id: Ia1a6cadc59034b155631a1ee5fdbe692d2a8a71b
A new diagnostic module librdc_rocr.so is created. The
module uses Rocr to test the memory allocation, memory access
and compute queue ready status.
Change-Id: I9098f4fc3209bf381b7cb3658a4e94c2e22f2fe9
Provides a RdcSmiDiagnostic module, which will call rocm_smi_lib.
It will support following diagnostics: Get GPU Topology, Check GPU
parameters and check processes running on the GPUs.
The grpc client and server side diagnostics function is added.
The diag module is added to the rdci.
Change-Id: I10a0cf3c20556a61373ab686f82cae75acaa40dd
The rdcd uses another thread to listen the GPU events. That thread
runs in a tight loop which consume 100% CPU.
The fix will add a sleep to yield CPU.
Bug: SWDEV-291576
Change-Id: I7996720aab4a80346d79b1c73ee532d2abcd93cc
RDC can optimize by bulk fetching multiple metrics using a single
rocm_smi call. However, currently this is not completely supported in
all ASIC generations. By default disable this for now.
Set environment variable RDC_BULK_FETCH_ENABLED=TRUE to enable
RDC bulk fetch.
BUG: SWDEV-289316
Change-Id: Ibb55514f198356dccf5f47bb0fd2d53c17acb251
The API interface defines how the caller will use the API. An
example also shows how the API can be used.
It also defines the RdcDiagnostic module which can load the
library dynamically and then dispatch diagnostic test to run.
Change-Id: I1e041aab86f7e19338860f5ba65262977f4ea9cb
RDC is trying to bulk fetch power usage from gpu_metrics. If the
gpu_metrics is 0, it will fallback to rsmi_dev_power_ave_get().
Change-Id: I57d165d6af0c91b39798c89eef317d4e5df2d0f6
Write access is required for some RSMI services. This change
temporarily permits write access so configuration can be done,
and then turns it off.
To help with this, the ScopedCapability struct is introduced to
provide scope limited access, helping to ensure a process is not
left with extra capability, should an exception occur.
Change-Id: I4978a1a688db935b8bfc27b3b537a0dd07959d3f
RDC_EVNT_XGMI_[2-5]_THRPUT were missing from RDC. Additionally,
these were handled as "pseudo" events, but this is not
necessary.
Change-Id: I3478365ac0d78f60a7b63235bea484f3edb8bd16
Install the grpc lib to rdc/grpc/lib and add miss libraries.
Add “--no-as-needed” and all extra grpc libraries in rdci/rdcd as
RUNPATH will only search direct dependencies.
Change-Id: I596acb2eb3a7228d703e79db64699bc20d0e7c09
The RDC provides a wrapper to bulk fetch metrics from rocm_smi_lib.
If the video card does not support bulk fetch or the metrics cannot be
bulk fetched, it will fallback to fetch them one by one.
Change-Id: I8852ba1ed67e0fabc805c93b1080f74c233516e1
The new raslib fields are added to RDC for dmon.
* The rdc_field.data, rdc.h and rdc_bootstrap.py are changed
for new fields.
* The RDC_FI_ECC_CORRECT_TOTAL and RDC_FI_ECC_UNCORRECT_TOTAL are
removed from RdcSmiLib.cc, and will be gotten from raslib.
Change-Id: I4ee016e3d52e9d38b54406ca129da511f741c6d6
Also:
* print header line every 50 line on output
* print events that are being listened for with header
* cpplint clean-up
Change-Id: Ic049eb79156a9528b556e56f0fa43e1344f898cc
When RDC are only used as the libraries, the user can choose not to build
the rdci and rdcd, which will remove the dependencies to the gRPC and protoc.
The -DBUILD_STANDALONE=off should be pass to the cmake.
* Change README.md for the instructions.
* Move the python_binding installation from client/CMakeLists.txt to CMakeLists.txt
so that the RDC library only build will also install the folder.
* Change CMakeLists.txt and rdc_libs/CMakeLists.txt to build with gRPC only if
the BUILD_STANDALONE is enabled.
Change-Id: If9cfe9fc298a83636d85fe352a311fe2fe041661
The framework now supports watch() and unwatch(), which can be used
by the telemetry library to init events or pre-fetch fields when recording
starts.
* A new header file RdcTelemetryLibInterface.h is defined for library to
include it.
* The RdcWatchTable will not talk to RdcMetricFetcher directly anymore.
It will call the framework watch/unwatch to dispatch it to the libraries.
* Make the python binding consistent with the current code.
Change-Id: Ie5731d920ed5928f901369d60c23bd450807a562
RAS library will provide two new APIs:
rdc_status_t rdc_module_init(uint64_t flags);
rdc_status_t rdc_module_destroy();
When RDC load the librdc_ras.so, it will call rdc_module_init().
When RDC exit, it will call rdc_module_destroy()
Change-Id: I7f5c81fd19a45a906c3c339cd6eabee2277f27ca
The framework is required for RAS integration. When the RAS fields
need to be retrieved, the framework will load the RAS library at run time,
and then call the RAS function to retrieve RAS metrics.
* The RdcModuleMgr will be used to manage different modules. RDC
only has the telemetry module now.
* When RDCTelemetryModule is loaded, it will load the RAS library.
It will also call rdc_telemetry_fields_query() defined in the RAS
library for the list of fields RAS supported.
* The RdcSmiLib is a wrapper for the rocm_msi_lib to provide the
interface required by the RDCTelemetryModule.
* The RdcWatchTable will use the RdcModuleMgr to get the
RDCTelemetryModule to bulk fetch mulitple fields.
* The RdcTelemetryModule will dispatch those fields to different
library: RdcSmiLib or RdcRasLib.
The watch() and unwatch() in the RDCTelemetryModule will been implemented
at the next task.
Change-Id: I81b01d5b52d1ea3cdcec7c09af86b6622dd5899e
Adds support for RSMI event counters. This also includes
"macro" or "pseudo" events, in which an event value is
obtained from RSMI, followed by some post processing before
being displayed in rdci.
Aside from the support of new fields, the main update here
is to introduce an initialization and "shutdown" call for
new fields that will require this.
Also, includes some modifications to the rdci dmon list
command:
* in rdc_field_data.data, added the ability to specify whether
a field should be hidden or not, by default. This will
allow us to support many fields, even those that are not
typically of interest (but sometimes may be), without
confusing the user or unnecessary clutter.
* added a --list-all option which lists all available field
including the more obscure fields.
Change-Id: I01dd0edea963c12f82c6e44f893a390711ef3e83
A new folder python_binding is created for RDC python binding:
* The rdc_bootstrap.py is a python ctypes wrapper for the librdc_boostrap.so
* The RdcUtil.py defines common utilities for RDC to manage group/fieldgroup
* The RdcReader.py is a class to simplify the usage of the RDC:
- The user only needs to specify which fields he wants to monitoring.
RdcReader will create groups and fieldgroups, watch the fields, and fetch the fields.
- The RdcReader can support embedded and standalone mode.
- The standalone can be with authentication and without authentication.
- In standalone mode, the RdcReader can automatically reconnect to the rdcd when the connection is lost.
- When rdcd is restarted, the previously created group and fieldgroup may lose.
The RdcReader can re-create them and watch the fields after reconnect.
- If the client is restarted, RdcReader can detect the groups and fieldgroups
created before and avoid re-create them.
- The user can pass the unit converter if he does not want to use RDC default unit.
Change-Id: I109ec86012f37162eb13f7d3e921115b7dd82369
Make the RDC use the new rdc_field_t enum instead of uint32_t.
This will help prevent invalid field types from being passed in.
Also, centralize where data related to fields is kept. This will
reduce the number of places where changes are required each
time a new field is added.
Finally, cleaned up several cpplint issues.
Change-Id: I48e4512e18c164411d8b09ae3d4bed99fba359ec
Galantsev, Dmitrii
Bill(Shuzhou) Liu
Ranjith Ramakrishnan
Icarus Sparry
Chris Freehill