For GC 9.4.0, modifications were made to various shaders since certain
flat_ instructions no longer support glc/slc modifiers (replaced with
nt/sc1/sc0). Instead of repeating conditionals inside various shader
bodies, we can make use of LLVM AMDGCN macros.
This patch modularizes the shader macros into seperated defines. Prior
to the core raw-string literal, each shader now starts with the
SHADER_START literal (".text\n") plus any number of SHADER_MACRO_*
literals. This allows us to seperate the macro definitions logically and
use the pre-processor to only include the required macro groups on a
per-shader basis.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I19eb3fd14252a0601bb7509249051b68e7fdb02a
Previously, KFDEvictTest.QueueTest and KFDSVMEvictTest.QueueTest
would create a variable number of wavefronts, one for each 64MB
of memory under test. This ran into limits on the buffers used
by the wavefronts, and may at some point have exceeded the
wavefront limit.
Restrict the number of wavefronts to 512, and adjust the shader
to accomodate a variable buffer size
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I2ec292e2900e2efa62a08313bca3d2f4bdabca8b
KFDMemoryTest.DeviceHdpFlush requires device node 0 is large bar to
check VRAM content from CPU, run the test only if device 0 is large
bar GPU.
Change-Id: I874b153219550c50b724625e971e3ed3a84dc652
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Nodes with XGMI have no HDP, so DriverHDPFlush should skip.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: If5a87e660712e51d03e750d8e044786036b2e603
Even with the restriction to only compile on gfx90a, this
shader still fails CompileShaders test.
There don't seem to be any systems that actually use it.
Leave it in the shader store, but remove it otherwise
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I41bec6ba10363d42b163ac101c3a92edaad6d6df
A gfx940 code path was erroneously added to this shader.
It's unneccesary; without this path, the shader uses
the scalar store, which works just fine on gfx940 without changes.
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I825cbbebbdb25c4a7c2f16e228c2bea6a6bcc30c
gfx940 changed the semantics of the glc and slc coherency options
on vector stores and loads. This means that shaders that use
those bits no longer compile on gfx940.
Add precompilation if statements to those shaders to use the
new coherency bits.
Also add gfx940 to ASMTest so that compilation is tested.
Note: One of the tests enabled by this patch on gfx940,
KFDEvictTest.QueueTest, does not pass on gfx940 emulators.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I942f9d2536e9eb5510c4d5af30df6ff1a95c8cf7
Program ACCUM_OFFSET to match the number of VGPRS used
by the shader as part of Dispatch setup.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: Icfa1fbe4de2a62f00743de567f3ed382d3378b17
Add gfx version for VGPR size per CU calc, add FAMILY_AV to KfdFamilyId,
add blacklist filter to kfdtest.exclude.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I9b8072e45f4d497e0a8fd3f8f97f1425238e8b42
Instead of hard-coding lib64 and other include locations, just prepend
the DRM_DIR to the beginning of the CMake prefix path. Then let
pkgconfig find the package, the same way that it would if DRM_DIR wasn't
set. DRM_DIR takes precedence, but the default paths will be used if
DRM_DIR isn't set, or doesn't point to where libdrm is housed
Note that /lib and /lib/$ARCH aren't required for DRM_DIR, just the
path to the root folder for the package (e.g. /opt/amdgpu instead of
/opt/amdgpu/lib or /opt/amdgpu/lib64 or /opt/amdgpu/lib/x86_64-linux-gnu
etc)
Change-Id: I56767db28476d14e3fa77be1089c3904e2a32450
See description of previous revert.
This reverts commit 564913526a.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I969dc6469e62b50cd7ba0595918538602afa7516
This patch and the previous made it such that the queue ring buffer was
allocated as non-paged for GFX11+. The queue ring buffer should not be
mapped as non-paged; the non-paged requirement on GFX11 is only needed
for the queue wptr.
This patch was causing issues on various tests, such as intermittent
CP_INTSRC_BAD_OPCODE interrupts.
This reverts commit e40ae8481e.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I55b64aed73dc3b792f0756ae00daf6e10d93ce10
Test is inconsistent across ASICs. Add to blacklist to unblock QA.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I31e5aa2450165227107536bef8402db2c0dc6d7f
Get more debug information about user pointers that were registered
through SVM API, and triggered by memory exception events.
A new kfdtest with this use case was also included inside
KFDExceptionTest.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I0ef4929afe0625b9b5cbbbebef11ede66dda60ab
Register and map userptrs through Shared Virtual Memory(SVM) API at
the Kernel level when available. Using this approach, performance
will be improve as register/unregister memory will not trigger any
system call to KFD driver.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I3726b4b5e1c6a52a83786fbe0af6322eb29ae7c9
The MemoryAllocAll test in kfdtests exercises the new KFD memory
availability API by trying to allocate a single buffer object that
exactly fills all of vram. Desired object size is determined using the
memory availility KFD ioctl via libhsakmt, then an object is allocated
slightly larger than that size. If the allocation attempt fails then
the test tries to allocate a slightly smaller object, and continues
trying with smaller sizes until the allocation succeeds. The test
succeeds if the successfully allocated object is within some specified
tolerance of the available memory reported.
There are a number of known issues that can cause the successfully
allocated object to be significantly smaller than reported availability.
Until these issues are addressed, we should not fail the test, but just
log the actual divergence between the size of the object we thought we
could allocate, and what was actually possible.
Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Change-Id: I165a30865ffbb2353286dcc896ad8e24af124615
Since KFD counts svm allocation as system memory usage,
KFDSVMEvictTest will fail on the case of small system
memory, adding check is to skip test.
Signed-off-by: Eric Huang <jinhuieric.Huang@amd.com>
Change-Id: I040f16f2dd0d4092d069a632cfba9c28293f781b
Remove BLACKLIST_GFX10_NV2X from GFX11 blacklists, update
BLACKLIST_GFX11 as needed.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I84bd91ba20a5d3df27478fb4c97afa12f8a3e76a
KFDTopologyTest.BasicTest duplicates Thunk logic to calculate VGPR size,
meaning it will always be the same, and SGPR size is a constant. Since
no benefit, remove comparisons.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I99e7ff6fb69ed07bc0716fdf43946b19c67b9268
This reverts commit 178a619b80.
There are some openMP issues that were introduced after SVM userptr
feature was added.
Signed-off-by: Alex Sierra <Alex.Sierra@amd.com>
Change-Id: I7ef87c5232a3bcbe594c743fa4b4958601845ba5
This reverts commit 45fad29752.
There are some openMP issues that were introduced after SVM userptr
feature was added.
Signed-off-by: Alex Sierra <Alex.Sierra@amd.com>
Change-Id: I6566c9f0d39d05ecb92f38159880763f432939a5
Track Test Status in syslog, it will help understand
sys log assoicated with test cases.
Change-Id: I7c0749102db9bc73d6ae3a237ec347a8fefb12e9
Signed-off-by: James Zhu <James.Zhu@amd.com>
Detect under-reporting of available memory by initially attempting to
allocate substantially more than reported available memory, and ensure
that the allocation fails. Continue shrinking the attempted allocation
until it succeeds, then fail the test if the successful allocation is
either too much more than or too much less than reported available.
Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Change-Id: Ib418f0aa26e8db80590a6c5f2578da56a4b60f2b
Modifier scc is disabled from gfx90a's asm, so remove the
shader for gfx90a A+A and keep it for newer asics with scc
support.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Change-Id: Iec3c7ccd5156a855adb2b02feb3db0761876aa2f
To avoid confusion since this shader has changed to be persistent
(original IterateIsa may be re-used for debugger tests).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I4643692765fc7665933257e89d5b922e779ad2e5
Get more debug information about user pointers that were registered
through SVM API, and triggered by memory exception events.
A new kfdtest with this use case was also included inside
KFDExceptionTest.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I8e9df3c1c6c3f42d7b9235d12406d80d31746443
Register and map userptrs through Shared Virtual Memory(SVM) API at
the Kernel level when available. Using this approach, performance
will be improve as register/unregister memory will not trigger any
system call to KFD driver.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I20723cbeb340bf48b95e1115f0102c031397bc14
KFDCWSRTest.BasicTest is parameterized to allow an easy method of
tweaking the number of work-items (and save/restores). The input/output
buffers were previously hardcoded to a single page, which would cause a
segmentation fault if the number of work-items specified is greater than
1024 for wave32.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Ieefc819a5d81c77cee88081a287fd383e6378e74
For software trap in GFX11, COMPUTE_PGM_RSRC1 must have PRIV = 1.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Id504889c3ca2588b6c8cefdebaec00dcfc217995
On error mmap returns value MAP_FAILED, which is (void *)-1, not NULL
pointer.
Change-Id: I81b187266c943fa0aa4fab21b529d4c2989b12ad
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
IterateIsa had some leftover instructions from when the shader was
getting updated for KFDCWSRTest.BasicTest.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I41ae7b7948cbe2aff8bf61b170b9a7d498b836a3
When running kfdtest test case, because the filter node of the new chip is
missing in libhsakmt, the test case is not supported, so a new test node
is added in order to spporting kfdtest case.
Signed-off-by: shikaguo <shikai.guo@amd.com>
Change-Id: I0cd9ffd7d4387129cfb0f8de6b669f431949ab49