The KFD patch "drm/amdkfd: Ignore bogus signals from MEC efficiently" will
reserve one signal slot that user mode cannot use any more. Update
the maximum event number in KFDEventTest to match that change.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: Ic789e16b6d73dfea66ab51c5bbc075c8e8e2d052
[ROCm/ROCR-Runtime commit: 347bf6a03c]
On the some platform there's only 256MB vram and then will fail to
allocate 256MB vram. So let's limit a small vram allocation for
ensuring vram allocated successfully.
Change-Id: Iba4c469de56925675e5624b300a6153e24ab19b3
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
[ROCm/ROCR-Runtime commit: c86a0b8332]
It's not possible to allocate the 3/4 vram size with granularityMB
being 128 when vram size < 512MB and decrease granularityMB to 16 has
no significant impact on ROCt test on other system. So let's decrease
granularityMB on small vram system for handling LargestVramBufferTest().
Change-Id: Iea7c29abfd382a20761b653730fd09a220ad2fd0
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
[ROCm/ROCR-Runtime commit: 6c103877dd]
Some VRAM access tests in MMBandWidth can be very slow on systems with
complicated PCIe topology. Skip tests that take a long time to avoid
excessively long running tests with little benefit.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: I2950237347fc2f764f6aa3292ab819051472bf37
[ROCm/ROCR-Runtime commit: 3ecd54f098]
Map failures happen in AllocBuffers function when there
isn't enough space to move BO to vram. In such cases, the
function retries allocation/map until successful to continue
testing eviction and restore.
Print a message in KFDEvictTest when this happens to correlate
to the message seen in the kernel log.
amdgpu 0000:c1:00.0: amdgpu: Failed to map peer:0000:c1:00.0 mem_domain:4
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Change-Id: I0475d8d9521a07612182e54fc7cddb9bd44353e6
[ROCm/ROCR-Runtime commit: 0d07b3477b]
If PCIe Atomics aren't supported, we shouldn't try to run a test that
tests PCIe Atomics. Check for support, and bail early if it's not there
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: Ie9aa0fed3ece07fb83a33e6cacef2961626afab4
[ROCm/ROCR-Runtime commit: f62e9b9821]
While this is currently only used in one subtest, it's useful to have
this separated into the test utilities. This will also allow us to check
for PCI Atomics support before trying to run them.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I9704d151bfaa627eceae8399cc46c15babde6ff1
[ROCm/ROCR-Runtime commit: 8b54459e12]
This error messages should be handled by the caller.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I68d879d6d41835f47b8ac138c2218eaa6b86a512
[ROCm/ROCR-Runtime commit: dc33a092c0]
Incease more timeout according to peers number to pass the
test on some PCIe link platforms.
Change-Id: Ifcb8c7297d6960c96fc18d29bc0a48733ca50165
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
[ROCm/ROCR-Runtime commit: 7c62a12918]
Total VRAM size on APU is 512M usually,
Framebuffer also is allocated from VRAM.
There is no enough memory for this case.
/home/ruiliji2/p5/libhsakmt/tests/kfdtest/src/KFDMemoryTest.cpp:1285: Failure
Value of: (hsaKmtMapMemoryToGPUNodes(bufs[i], bufSize, &altVa, mapFlags, 1, &defaultGPUNode))
[ FAILED ] KFDMemoryTest.MMBench (1034 ms)
Change-Id: Ib4201291122d85f6512a85859aea9a4713fb4f5c
(cherry picked from commit a9f924484e7022a2d53ee02811b080f0833eba55)
[ROCm/ROCR-Runtime commit: 0340c68031]
skip HDP flush test when remap feature is not supported.
Backgroud:
the HDP register remap is skipped in sriov mode,
it will cause mmio base is nullPtr.
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: Ib9aea1900931e30571656397a485ee4db051ec0a
[ROCm/ROCR-Runtime commit: 033b52c4e4]
Explicitly free the user buffer ptr before test's tear down. Otherwise
the svm_bo object will never be released, causing a BUG error. Due to
a late callback to svm_migrate_page_free when prange not longer exist.
Also did cosmetic adjustments.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I989c62de8a9634faa84e42def956cecb3f84e329
[ROCm/ROCR-Runtime commit: 2dbee30232]
Since it's shader-based, the GFX9 shader won't work for GFX10. Blacklist
it for now until we move to a more ASIC-agnostic shader
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I353e9a3fe8c7ba6f33556e39c7e4f6b36e010480
[ROCm/ROCR-Runtime commit: 2801342048]
The shader is incompatible with gfx1030, so blacklist it there until we get
to some more ASIC-agnostic shader generation
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I71f362a80e6e8f87ecece6afa6b34a5f02bc56bf
[ROCm/ROCR-Runtime commit: 5a8c9a54f1]
This test requires KFD patch "drm/amdkfd: SVM map to gpus check vma
boundary" to pass, the patch is on staging-dkms branch, not land on
mainline branch. Temporary blacklist this to unblock QA, as QA reports
kfdtest failure.
Change-Id: I00515cd5d5d1c5612f4f8d48605d86f4a7e62ce2
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 5adb142dc7]
After adjusting the memory usage, re-enable KFDEvictTest.BasicTest on
gfx906 and KFDEvictTest.QueueTest on GFX10
Change-Id: I401e679e447f3150241078154635f0b30692513d
Signed-off-by: Kent Russell <kent.russell@amd.com>
[ROCm/ROCR-Runtime commit: 392e0e2afc]
We were hitting memory map errors and segfaults when trying to use 7/8
VRAM on certain cards (dmesg showing "Failed to map to gpu 0/1"), as the
original check didn't see if this would exceed the GTT size.
Allocate the smaller of 1/3 of SRAM or 7/16 of VRAM (7/8 / 2) for the
tests
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: Ic11a5cee058535418eef903a28846e00e1839969
[ROCm/ROCR-Runtime commit: d5d8c022f1]
SDMA firmware of gfx902 has a regression which causes cp hang
in kfdtest, blacklist related test cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: Ie75b72a952a29d6b1394c5fcb67ff9a5143b3b07
[ROCm/ROCR-Runtime commit: 04b149b7fd]
Use alloca to replace variable size array.
Change-Id: I81e5a7d8f6ace203b81f5f5a651b2a6aa948821c
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 88e6921d45]
This was never validated on GFX10, so remove it for now until it's
either validated and confirmed, or move the check to the test itself
Change-Id: Ie4d8b31885fbe6e5ed84b7b174c0bfed60879741
[ROCm/ROCR-Runtime commit: f2f86591b6]
Map readonly range to GPU, test GPU can read range but write to
range trigger GPU vm fault.
Change-Id: Id2ce106055a353f21f4c34fa7f562d546523bc49
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: f9648c5014]
To test if SVM support address mmap on file backed memory.
Change-Id: I227cc0b44d167c4fa2e63257e13a481aefa4f750
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: d91f92669b]
Update KFDCWSRTest.BasicTest to run CWSR test with legacy HWS,
MES, and software scheduler.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: I09af904507109c2bbbace6ff616a57fa2b1b8aa9
[ROCm/ROCR-Runtime commit: acd5eda54f]
This is reported as failing on pretty much every ASIC, so move it to the
temporary exclude list for all ASICs until the test can be fixed.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I2973feb5705c178db32009e4603376d1f5e94a2f
[ROCm/ROCR-Runtime commit: 52f5b666d6]
Some g_system and Node ID checks already performed by validate_nodeid().
Fixes bug where hsaKmtGetNodeProperties() would return on
validate_nodeid() error without releasing lock. Switches some
conditionals to return INVALID_NODE_UNIT instead of INVALID_PARAMETER if
NodeId >= NumNodes. Removes some g_system assertions to return error
code rather than trigger a hard fault.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Id1604b20c2cef8808b98cdad61bd47aa7ea3d229
[ROCm/ROCR-Runtime commit: 29369753f5]
hsaKmtAllocMemory with mflags.HostAccess=1 will fail on desktop gfx1xxx GPU
because it's small bar PCIe. Remove this flag.
Child process exit status should use current_test_info, not unit test
info.
Change-Id: I060f23aa98a42251921d003878e70a409c92a4de
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 413979c319]
Parent process alloc memory with specific HsaMemFlags, child process
import the memory handle exported by parent process, query shared memory
pointer info, verify it has same HsaMemFlags.
If child process test failed, exit with error code to notify parent
process.
Change-Id: I5c9534e931b4565186d27124868799b893504c81
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 426b94015c]
Test if query userptr pointer info return correct alloc flags,
CoarseGrain by default.
Test if query hsaKmtAllocMemory pointer info return correct alloc
CoarseGrain flags.
Change-Id: If3a1175645717e5d7c475d6ff35b02d6876a1f7c
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: c3c1618db7]
The debugger and debug agent no longer use the Thunk API.
Remove all deprecated functions and keep commented
references for future KFD tests.
Update and the keep the version checks for future use
and hsaKmtRuntimeEnable/Disable.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Change-Id: Ia2f10d82f5ac36d0bd1bda233810f26e8a154d55
[ROCm/ROCR-Runtime commit: 31ac82617c]
If the devices aren't peer-accessible, we shouldn't try to run a test
that requires that the devices be peer-accessible. Thus, add a check in
MapVramToGPUNodesTest to check for peer accessibility before executing
the peer mappings.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: Ib79b141f8c1ac6d85f5ab49d62af62ec10b988b7
[ROCm/ROCR-Runtime commit: bdfe3a12a8]
Test Thunk multiple threads register and deregister same userptr race
condition, to emulate application register same userptr to multiple
GPUs using multiple threads.
Use thread barrier to sync the threads, to start register userptr at
same time.
Change-Id: I6723dc39f75908026fa14a490e39e1fe49a13a1b
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 92076f6f1b]
Limit test buffer size to 3/4 total VRAM size, and max 1GB.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Change-Id: I937e10b0a6bd8215e3865b50f22ce75b3982a6f7
[ROCm/ROCR-Runtime commit: fd131e875e]
Add a blacklist for gfx1xxx12, using the same list as gfx1012
Change-Id: I7e620dba8a36f6f89152a48066234884150a15dd
[ROCm/ROCR-Runtime commit: b2fb2a3470]
This is causing PSDB/OSDB failures so disable it until investigation is
done
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I666cd45fdf8ae585486adc7cf43eacd1700704bb
[ROCm/ROCR-Runtime commit: 5796225011]
To test ACCESS_IN_PLACE GPU mapping update to system memory.
Change-Id: I5b990215f39692e829128d848125e1ae0d571e03
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 351a41ac76]
blacklist some svm related test cases until they are solved.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: I05e2d965d89bcbf3d43bed2873297e98ad0738ef
[ROCm/ROCR-Runtime commit: 9e0fc7f3c6]
It needs to skip LocalMemoryTest because it doesn't support local memory
with no dgpu path.
Change-Id: Iedb6f6deba55e239b21747d933cf2d7005623106
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
[ROCm/ROCR-Runtime commit: 55cb03dbae]
The updated sp3 compiler does not support GFX10 temperaly.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Change-Id: Idd9336663814b7925d9742eee0bd310d00945d3e
[ROCm/ROCR-Runtime commit: b8ef20e35c]
Fixes assembler error. The SP3 backend if already set to FamilyId.
Change-Id: I7721a555b05688b16993a03242a765694594825a
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 86a68b2774]
Increasing the timeout will avoid some test failures. This shouldn't
mask any issues as any incomplete shaders should still hang and would
just time out at 180 sec instead of 120 sec.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: If4e893ab80d9d159bd0b8b112aa7574abc5e4f44
[ROCm/ROCR-Runtime commit: 9168dfe041]