Commit gráf

45 Commit-ok

Szerző SHA1 Üzenet Dátum
Tony Gutierrez 77fa5af618 rocr: Make Open() and Close() virtual in Driver
Change-Id: Iac054c08383b080ca2b2ec6d65019bf2f083b763
2025-01-23 15:09:06 -05:00
Chris Freehill 0c18ff22e1 rocr: Generic ISA targets support
Change-Id: I6a0341ec9c1ec1e710143676b80a8a3c1a78f725
2024-10-28 08:54:06 -05:00
Saleel Kudchadker 3baaa6e9c0 rocr: Allocate AQL queue on device memory
- Use HSA_ALLOCATE_QUEUE_DEV_MEM=1 to create AQL queue in device
memory.
- Before writing AQL packet header to the queue use an SFENCE to ensure
that there is no reodering of the writes over PCIE

Change-Id: I5eacdc35108c4a1e245c75ae349b7495451aa60d
2024-09-05 17:48:02 -04:00
Tony Gutierrez c42ff44a6a rocr/kfd-driver: Add initial KFD driver interface
Adds the initial KFD driver interface and use it to open the
KFD from amd_topology.cpp.

This change is to show the direction of the Driver interface for
initially supporting the KFD and to get feedback on the approach.
For now we wrap relevant ROCt calls behind this generic driver
interface so that we can generalize core ROCr components like
MemoryRegion, Runtime, etc.

Now that ROCt is incorporated into ROCr, we can more fully integrate
ROCt into the Driver interface. Ideally, we get to a point where
the generic Driver interface can support KFD, XDNA, and potential
future drivers.

Change-Id: I4573fd6af1f8398233ee9d3814d9f3139dd0279c
2024-08-28 14:34:54 -07:00
Tony Gutierrez 86f40ae489 rocr/xdna-driver: Initial support for amdxdna driver
Change-Id: I319b55d89dc644e7151228cb6c19d1a633171295
2024-08-28 14:34:39 -07:00
Tony Gutierrez 8ea62f1cea rocr/aie: Add initial support for AIE agents
This change adds the initial classes for the AIE agent and AIE AQL
queue.

An AIE agent list is added to the core runtime object.

Change-Id: I84b02f52171b80726dfb2c8431582a3ea2986eb3
2024-08-27 14:47:05 -07:00
Jonathan Kim eb30a5bbc7 rocr: Memory copy based on recommended SDMA engines
Recommended SDMA engines for DMA copies are now exposed for better
GPU-GPU performance. ROCr can now select those DMA engines.

Also lock-in host-device copies to SDMA0 and device-host copies to
SDMA1 for better stability and performance.

Change-Id: Ideff2e13daf537104efecb8b837bd49ee5096cb5
2024-08-20 16:22:32 -04:00
Jonathan Kim ed462035fa Disable SDMA ganging on non-APU multi-partition modes
Work around SDMA hang in non-SPX modes for non-APU devices by disabling
ganging.
Root cause of hang not found.
non-APU xGMI modes have only 1 link between socket devices anyways so
there's likely no real system level gain in ganging intra-socket.

Change-Id: Ia4eda2f85cbf25151d3dbcf50cc45b8b775c60e2
2024-02-28 14:52:01 -05:00
Jonathan Kim 62f3f250ce Optimize and fix SDMA gang copies
Optimizations include:
- Greedy gang by placing gang leaders on first D2D sdma blit context
to avoid dead locking with other gang leaders and items.  Note that
this is fine since we can't avoid an oversubscription problem when
there is only 1 xGMI link anyways, so treat all xGMI links as a single
pipe for ganging.
- Non-leader gang items don't have to poll on dependency signals so this
opens up more non-blocking SDMA channels.
- unlock gang lock when gangs are not needed.
- Change gang factor lookup from vector pair to map and register all
gpus in gang factor lookup regardless of link type so that we can take
advantage of the O(logN) direct key/value lookup time.

Fixes include:
- HSA_PAGE_SIZE_4KB was an incorrect macro to use for gang size limit.
As a result, small copies ended up ganging and hitting latency limit.
Use hardcoded 4096 bytes instead.
- Cap auxillary gang factor to the number of non-XGMI SDMA engines.

Change-Id: Ic23fde131502906a807134a04599aa6d012e8cbb
2024-01-25 10:42:27 -05:00
Alex Sierra 54604654bd reports KFD core dump support through hsakmt API
Member added to KFDVersion to report if KFD supports core dump
mechanism. This is done through hsaKmtRuntimeEnable API call while
the topology is being built. It also dictates if core dump will be
generated by either KFD or hsa-runtime.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I2e9d4166563402f78613d728446feb692c52d9d1
2023-12-05 23:19:14 -05:00
David Yat Sin 22becfb1e8 Add query for Xnack enabled
Add system query for whether Xnack is enabled on a system.

Change-Id: I2832110e4f33f6a951d13acd06636442debf27ae
2023-09-19 00:25:30 +00:00
Jonathan Kim 132815bcfb Clean up SDMA ganging
We don't need to keep track of specific blit engines in gang for
submission anymore as ganging early exits on pending bytes.
So tidy up the fluff.

Change-Id: I77e80bf1ad8f561a03fff77bce33aa09d02760c6
2023-08-22 05:57:04 -04:00
Jonathan Kim 4c74e47e91 Update D2D SDMA ganging for non-SPX modes
xGMI for compute partitioning in non-SPX modes does not have
a reported bandwith.
Fix it to at most 2 since each partition is either bounded
by the number of xGMI links or the number of available
SDMA contexts.

Change-Id: I09094bd7548d9eee6f039b0efe849838e5de166e
2023-08-17 07:25:08 -04:00
Jonathan Kim 7df0167821 Enable D2D SDMA Ganging over xGMI
Use all available SDMA engines capped by xGMI bandwith for
all D2D copies within a hive.

By default, set the latency boundary copy size as 4KB and below.
Any copy size in within this boundary will not gang.

Avoid oversubscribing engines by not ganging on engines with
pending non-ganged work.

An enviroment variable HSA_ENABLE_SDMA_GANG has been provided
to override default ganging behaviour.

Change-Id: Iccde76aa1af1d47ea2a151789432c9db4f0ffa8d
2023-07-27 08:58:26 -04:00
David Yat Sin e39ad34d9c Check for debug support after parsing topology
Thunk keeps an internal cache of system topology that can be used to
speed up subsequent calls to hsaKmtAcquireSystemProperties(). This cache
is cleared by calling hsaKmtReleaseSystemProperties() at the beginning
of BuildTopology().
hsaKmtRuntimeEnable() also calls hsaKmtAcquireSystemProperties() inside
Thunk. Move call to hsaKmtRuntimeEnable() after BuildTopology() so that
we can re-use Thunks internal cache.
Parsing of of topology can take ~150 ms on systems for large number of
nodes.

Change-Id: I741709d49d67d244f5fbd707fe8f01ab923bb153
2022-12-02 11:26:00 -05:00
Sean Keely c289a43e88 Allow zero agent handle in AsyncCopy APIs.
IPC use cases with RVD set can't convey proper agent handles.
Runtime discovery is required to properly route the copy in this
case.

Change-Id: I4c97e132fb4b6ac1040de1cb17fe5a3e36d6be48
2022-05-14 18:08:49 -05:00
Sean Keely 752cfd5ffd Adjust include paths for new header locations.
Thunk and rocm_smi_lib paths have been updated.

Change-Id: If2948172f8064dd992cbccbc2a80f9161ad4d457
2022-05-09 14:44:32 -04:00
Sean Keely 19c1e92b4c Remove io_link workarounds.
KFD topology has been corrected and the defaults used by this
workaround are no longer true for all chips.

Change-Id: I0242d8077e9666ed1cf0dc3985244258ae5c0924
2021-10-11 19:15:07 -05:00
Sean Keely 234ef77e32 Close KFD when failing due to debugger state.
Change-Id: I6a6890fd9e86d27f87ae96de1c47c89d40a4e010
2021-10-03 12:27:49 -04:00
Sean Keely 2aa0795b33 Improve HSA_CU_MASK parsing efficiency.
Delay parsing until after GPU discovery.  Use the surfaced
GPU count and maximum phyiscal CU count to limit parsed bit masks.

This prevents pathological input such as
HSA_CU_MASK=0-8000000:0-8000000 from attempting to consume 7TiB.

Change-Id: I3773d2db3740c2023b0f6275d1818b69119b0495
2021-08-27 20:05:18 -04:00
Sean Keely 4455250be1 Add HSA_CU_MASK
New environment variable HSA_CU_MASK allows users to
specify a cu mask to every queue allocated from any
GPU.  hsa_amd_queue_cu_set_mask is restricted from
escaping this mask.

A new API hsa_amd_queue_cu_get_mask is added to query
the current cu mask.

Change-Id: I846c03a5faaca9b95067c31db84b59cc9fce2f03
2021-07-29 02:23:34 -05:00
Jay Cornwall 7e4088309d Add new trap handler, bump debug API version
Also fix hsaKmtRuntimeEnable error handling. Continue if ioctl fails.

Change-Id: I754ccba5910ccfef6f1ada1415593ef89ce33aba
2021-07-16 18:03:26 -05:00
Sean Keely 206e87d28b Support debugging hw exceptions.
Change-Id: I9780147294af2e9457fa54693580735452ee2ae6
2021-07-16 18:03:26 -05:00
Sean Keely ee8b1b64ad Report HMM driver support status.
Implements HSA_AMD_SYSTEM_INFO_SVM_SUPPORTED.

Change-Id: If5182edcc1fa067fa514aa2c1bd326c4c42d1b64
2021-04-21 21:44:42 -05:00
Sean Keely 77046a1aaa Revert "Revert SVM and XNACK support."
This reverts commit 5bd153974d.

Conflicts:
	opensrc/hsa-runtime/core/util/flag.h

Change-Id: I16daf41588e6139126d66af54b0693de2e7e39f3
2021-04-21 14:49:43 -05:00
Sean Keely 5bd153974d Revert SVM and XNACK support.
KFD is not ready yet.

Change-Id: I61deb292ddb92185d33504c2115169888d56e211
2021-04-02 02:10:59 -04:00
Ramesh Errabolu 25f3dc305f Override Cpu-Gpu link-weight for Alebaran until a proper fix is available
Change-Id: I1fbc38b788f71cc9c9fc62295223286004689bf9
2021-04-02 02:10:54 -04:00
Sean Keely 7333c77e22 Squash merge of cfreehil/amd-temp-gfx90a onto amd-staging.
Includes some workarounds and HMM.
Conflicts:
	opensrc/hsa-runtime/core/runtime/amd_topology.cpp
	opensrc/hsa-runtime/core/util/flag.h

Change-Id: I22976f07964a43dbb228a6231777dbd599112b8d
2021-04-02 02:10:15 -04:00
Sean Keely 45fbe5b192 Block ROCm 4.1+ running against 4.0 and prior kfd.
Sramecc is misreported in kfd 4.0 and prior.  To prevent possible
corruption due to d16 instructions, deny use of gfx906 with older
kfds and correct misreport for gfx908.  Denial of gfx906 may be
overridden by setting HSA_IGNORE_SRAMECC_MISREPORT=1.

Change-Id: I7d5c3a716fad01c348f8b88cd508cedbf914c989
2021-04-01 00:03:32 -04:00
Konstantin Zhuravlyov 3a08d0964e Implement Target ID Proposal
Changes from Konstantin Zhuravlyov, Tony Tye

Change-Id: I532801193afa9d5b8ac2a877b5497eab661f0597
2020-11-10 13:42:35 -05:00
Ramesh Errabolu fa13208698 Add rocr namespace to core header and impl files
Change-Id: I1e1b33f9bba1078d049bc19797889988c3e43360
2020-06-19 22:34:21 -04:00
Sean Keely ce19721c88 Update copyright date.
Change-Id: If4bf4c20cf051878bfe759080bb7345d884dd53d
2020-06-19 22:34:01 -04:00
Ramesh Errabolu 89f7ef224c Extend Rocr Visible Devices functionality to include UUIDs
Change-Id: Ia2892e4033717556a422fe33dec0294fe2ca9e28
2020-04-09 00:42:53 -05:00
Ramesh Errabolu 45958c727d Extend ROCr to surface UUID of GPU devices that suppport
Change-Id: I478db68d69a01578770403fa695f9e6391637573
2020-04-08 19:19:22 -05:00
Sean Keely 3c3db0243e Loader support for SRAM ECC.
Change-Id: I0c6791c356d9186cc8dabae9fd698b1d4de19b09
2019-02-25 18:30:05 -05:00
Ramesh Errabolu 3fbf03af76 Allows users, via env ROCR_VISIBLE_DEVICES, to surface a subset of Gpu devices
Change-Id: I5662639d5d70f054831969669f9d30dec356dd5a

Update per review comments

Change-Id: I18c7d7cb00b261493b61c2cf5454d486166f40d8
2019-02-06 02:02:29 -06:00
Ramesh Errabolu f007870792 ROCr changes to enable small BAR P2P over xGMI
Change-Id: I6aaa3fe2565cdf7e15d58a7484d6bd5916ffff64
2018-09-17 22:54:40 -04:00
Sean Keely c593dfc6bf Enable SDMA conditionally based on link atomic suport.
Avoids using non-atomic SDMA fences by default since that path can duplicate fences.
If HSA_ENABLE_SDMA is set this will override copy path selection and may use
non-atomic fences.

Change-Id: I4747e9a766f7f649d21ddf6bfded047ac26fd60e
2018-05-29 23:32:34 -04:00
Ramesh Errabolu dccbc9f2af Changes to support surfacing of link weight as part of link info
Change-Id: I1c0705a9374af1245f0419c51beded0d7ee10639
2017-10-20 12:09:31 -04:00
Besar Wicaksono 103cd04236 Blit SDMA support for gfx70x
Change-Id: Ie6f215890553ef41c3f36b349fc9cc39c2d38747
2016-06-02 06:18:36 -04:00
Besar Wicaksono bc589048a9 Use lazy initialization to create Blit objects
Change-Id: I388865030dc2538c5c881c055e38af52a57f6d87
2016-05-20 14:26:06 -04:00
Besar Wicaksono (xN/A) TX [TEXT] 823c254d61 Cleanup TODO format
[git-p4: depot-paths = "//depot/stg/hsa/drivers/hsa/runtime/": change = 1255182]
2016-04-06 16:50:50 -05:00
James Edwards (xN/A) TX 7d2bc9d113 Separate open source core runtime code from DK makefiles.
[git-p4: depot-paths = "//depot/stg/hsa/drivers/hsa/runtime/": change = 1250152]
2016-03-22 18:10:13 -05:00
James Edwards (xN/A) TX 7d1e6c3a57 Remove opensrc test files.
[git-p4: depot-paths = "//depot/stg/hsa/drivers/hsa/runtime/": change = 1249961]
2016-03-22 13:39:51 -05:00
James Edwards (xN/A) TX c9ffe0004e Check open source core runtime code into perforce. This includes license and README files.
[git-p4: depot-paths = "//depot/stg/hsa/drivers/hsa/runtime/": change = 1249136]
2016-03-20 15:39:40 -05:00