Fix was needed due to hwmon updates.
Several voltage sensors (ex. vddgfx/vddnb)
are unsupported or not applicable
to upcoming hardware. This was not the case
for previous hardware sensors, resulting in
the rocm-smi crash observed.
Change-Id: Ib8593e10811638def26fc7a1eda29309e328db09
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
[ROCm/amdsmi commit: f44d1ea8bc]
Using backward compatibility paths will provide an #error message. Compile time option added to enable/disable the #error message.
Disabling the same will provide a #warning message
Change-Id: Ib49633501aa6eb6d97158b1ecfc47de6f18fba85
[ROCm/amdsmi commit: 14b86107a7]
The process ids of other container are still visible in the sysfs file,
filter it out to prevent crash.
Change-Id: I665912cd09c606804186aff8cba5c24f5e58ded7
[ROCm/amdsmi commit: 710649ab66]
Updates:
* Fixed rsmi_dev_compute_partition_get
& rsmi_dev_nps_mode_get to properly check
for invalid arguments
* Updated compute partition & NPS mode tests
- Now properly confirms the invalid
argument is seen
- Spacing for multiple devices is added
to better see distinction between
separate device's tests (for verbose output)
- Changed expect to assert calls, so errors
are observed faster for test failures
- Fixed multiple device testing where a
variable should have been unset, but
having multiple devices caused it to
set
- Updated multiple device testing to iterate
accross all devices (previously returned,
instead of continuing checking support
after RSMI_STATUS_NOT_SUPPORTED detected)
- Fixed a few spelling errors & verbose output
Change-Id: Ieba9e5b46763c6cd880fbf27fcdf58be8ecbc683
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
[ROCm/amdsmi commit: c252ecccd1]
Updates:
* Added RSMI_STATUS_SETTING_UNAVAILABLE for
rsmi_dev_compute_partition_set - gives users
better error output when attempting to set
compute partition to values not listed in
available_compute_partition SYSFS
* Updated python --setcomputepartition to
provide better output when receiving
RSMI_STATUS_SETTING_UNAVAILABLE
* Updated all test & example files to check for
RSMI_STATUS_SETTING_UNAVAILABLE when doing
rsmi_dev_compute_partition_set
Change-Id: Ida5d54880d9b9b6e4a0468cdb962fdc0c18d6257
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
[ROCm/amdsmi commit: 0d3558945b]
Updates:
* Added rsmi_dev_compute_partition_reset & rsmi_dev_nps_mode_reset
* Added --resetcomputepartition and --resetnpsmode python smi calls
* Added temp data files rocmsmi_boot_compute_partition_<device num>
& rocmsmi_boot_nps_mode_partition_<device num>, writes UNKNOWN
if data cannot be read or device does not support
* Cleaned up NPS & compute API documentation
* Added creation and reading of API temp files (used in reset
functionality)
* Cleaned up output of rocm_smi_example
* Updated rocm_smi_example to check if running with sudo permission
before executing write API calls (cleans up erroneous output)
* Added template specialization for storing temp data, requires
specific rsmi_type_t enums (restrics what data can be stored)
* Added storage of temp data, if temp files do not exist
* Updated google tests for NPS & compute to include reset API calls
Change-Id: I69895a466b97107617e6dbb355737b84499a76c9
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
[ROCm/amdsmi commit: 77c950a4bf]
Updates:
* Added rsmi_dev_nps_mode_set and rsmi_dev_nps_mode_get
* Added ability to set multiple SYSFS files in debug build
* Added ability to see user's env variables set for debug build
* Added tests for rsmi_dev_nps_mode_set and rsmi_dev_nps_mode_get
* Added ability to restart AMD GPU driver, used in nps_mode_set
* Updated ROCm_SMI_Manual.pdf to include new APIs
* Added progress bar for long running python_smi_tools, used
in setting nps_mode if runs longer than .1 seconds
Change-Id: I6d61bedd28d7cba6aff432ad2d127ba741b7d15a
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
[ROCm/amdsmi commit: 9ef376cd61]
Fallback to other methods if the device name in sysfs is not printable.
Change-Id: I20b22950399d4a515d2688b955248a3de3c61d05
[ROCm/amdsmi commit: 00a6c78a51]
This patch fixes a --showproductname bug, which is related to the
device's SKU. If a device with a VBIOS value that cannot be decoded
is used, that device's SKU cannot be parsed out of the VBIOS string.
Now, when the VBIOS value cannot be decoded, an error will be
printed instead of crashing with an 'UnboundLocalError' message.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I680a182e94107e782235b8a2477ab165988f7703
[ROCm/amdsmi commit: 56f9d6bfc0]
On APU's vbios_version string might not be exposed. Relying on vendor ID
to detect AMDGPU is sufficient
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Change-Id: I08ef4b4bc7491a40f318791803aeaf261f7fac25
[ROCm/amdsmi commit: 142dcfa8f4]
Original updates:
* Added .gitignore to help with future commits
* Updated/added copyrights on modified or added files
* Updated rocm_smi.h/.cc
- Added 3 new SMI API functions:
rsmi_dev_compute_partition_set &
rsmi_dev_compute_partition_get
- Added helpful maps/enums used in
new get/set compute_partition API calls
* Updated rocm_smi.py
- Added --showcomputepartition
- Added --setcomputepartition
- Fixed a few mistypes
* Updated rsmiBindings.py - added helpful class/dict/list
* Updated rocm_smi_example.cc
- Added helpful MACRO to detect if api is not supported.
- Added current_compute_partition set/get rocm lib calls
- Added helpful macro to discover future RSMI errors
- Commented out test_set_freq, was having permission issues
on a Navi21
* Updated rocm_smi_main.cc
- Added helpful map to debug API calls, left in for future use
- Added comment to better understand a non-class function returns
* Added computepartition_read_write.cc/.h
- Added get/set compute partition API test calls
- Confirmed on devices that do not support the API calls, tests pass
* Updated rocm_smi_test/main.cc
- Calls new compute partition gtests
Added following updates from review feedback:
* Updated rocm_smi.h/cc
- Removed C++ API calls, adding support for both C/C++
API calls could cause confusion and adds extra work for us
- rsmi_dev_compute_partition_get -> Fixed an edge case where
user gives a small buffer length size (smaller than data
received), but does not receive the partial buffer back.
google Tests are updated to reflect this find.
* Updated rocm_smi_example.cc
- Fixed test_set_freq, issue was that file was not writable.
We now indicate this warning, so prior errors make sense.
- General test code cleanup. Removed extra code,
by creating loops for tests.
* Updated rocm_smi_main.cc
- Moved and got rid of an external reference to a map used
for debugging RSMI enums, now is a const public reference.
* Updated rocm_smi.py
- Updated python code to identify NOT_SUPPORTED due to
(currently) only a few GPU support the feature
Change-Id: I4a567acbb59d6771fb64df08d19175fe3604fd1b
[ROCm/amdsmi commit: 4d7f3f2bc7]
This patch fixes a couple of --showproductname bugs, both of which
are related to the device's SKU.
Previously if a device with a non-standard VBIOS name was used,
fetching that device's SKU wasn't working correctly.
A standard VBIOS name should follow the following pattern:
AAA-BBBBBB-CCC
Where the middle section "BBBBBB" between the hypens is the SKU.
Now, SKU can be correctly fetched even with a non-standard VBIOS
name, and return 'unkown' if SKU does not exist.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I5899a859c6131c6048bb31a4305ddacbac3075a9
[ROCm/amdsmi commit: 5c478e9eb9]
The purpose of this patch is to add a new feature to the smi cli.
Use ./rocm-smi --showtempgraph to print a persistant bar graph for
each GPU's temperature.
The bar graphs refresh continuously to show current temps, and the
graphs change in a color gradient depending on the temperature.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I98902b76c42cc7281420759f5ebe8c78f7785e66
[ROCm/amdsmi commit: 932feb6e49]
We append CE then UE, but in the table right after, it goes UE then CE.
Fix the order of the table, and add capitals for consistency
Change-Id: I208f37685508ab1e2ff83d3456620bbbf3a16268
[ROCm/amdsmi commit: 248c6f79f4]
If the code is crashed and the mutex may be in bad status. The user
has to mannually remove it. The fix will remove the shared mutex
if no process is using it.
Change-Id: I18bf562f2e0a7de8b3f0cccf72d60950b0d9bb2d
[ROCm/amdsmi commit: 76b5528feb]
File reorganization feature was implemented with backward compatibility
The backward compatibility support will be deprecated in future release.
Changed the #pragma message to #warning for a smooth transition
Change-Id: I281ad17949435fee4b508a2a7e112b6fa3365838
[ROCm/amdsmi commit: e7ed902fd6]
Return value from ReadSysfsStr function that reads cu_occupancy file
was not handled correctly. Modified the script to handle any fail conditions.
Change-Id: I3c71e0f6f288f196ed1f833e8709255c2b6e78ee
[ROCm/amdsmi commit: e9e3ba541e]
Install interface should provide /opt/rocm-ver/include as the include path
Path /opt/rocm-ver/rocm_smi/include should be used only as part of backward compatibility support
Change-Id: Idc1f663069356c6b1fbd492f45ef4637fc90e4eb
[ROCm/amdsmi commit: 9a650b1378]
Invalid peer links are labeled as N/A during topology report creation.
This invalid link type could be triggered by having a configuration
with CPU XGMI iolinks and disable XGMI peer to peer access. This can
be done by setting the driver parameter 'use_xgmi_p2p = 0'.
Signed-off-by: Alex Sierra <Alex.Sierra@amd.com>
Change-Id: Ifb09a8f3266a3f07686615dfb45781d6cfe55e83
[ROCm/amdsmi commit: 03fab6b2b6]
Devices with CPU XGMI iolink do not support PCIe peer access. Therefore,
they should not be reported as accessible links in the topology.
Signed-off-by: Alex Sierra <Alex.Sierra@amd.com>
Change-Id: I3ee51796945dc0966200dee03886510e8f1846b7
[ROCm/amdsmi commit: 4658630d8d]
The purpose of this patch is to modify the column header of the default
'./rocm-smi' command from 'Temp' to 'Temp (DieEdge)' for clarity.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I127a9214be97a1185c3db010f1c9176d1f412ec9
[ROCm/amdsmi commit: dfd88b593f]
--showdeviceid
Fix for false-positive "FRU is corrupted" messages,
since str(sn).isalphanum() triggers on empty struct.
--showproductname
fix script termination on non-alphanum product name
Change-Id: I78d4998e156f9b0d9f45338bed2a0d30b789e220
[ROCm/amdsmi commit: 8b2bc318eb]
I6520b51aac34060b5b90f94a016cec1827a4973f happens after uninstall, which
leaves a dangling directory under /opt/rocm/libexec/rocm_smi.
Removing __pycache__ before uninstall fixes the issue.
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
Change-Id: I695bd085d4a43b678b563b4c35f6d2e8ddfa7d7c
[ROCm/amdsmi commit: cd11d7530b]
Any default value if required should be controlled from outside.
For ROCM, build script is setting the value to "lib"
Change-Id: I12a2951307fe64e46a4e608476bfceb678bdc97d
[ROCm/amdsmi commit: c5159fa6d1]
This fixes the 'unknown' value being displayed
for Perf Level because of a missing mapping of
RSMI_DEV_PERF_LEVEL_DETERMINISM to its string
value.
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Change-Id: I479c2baea450f0ff61640ad81cbd4d08ad56ff8e
[ROCm/amdsmi commit: 8144dd4d8e]
The purpose of this patch is to set RETCODE equal to 0 by default
unless an appropriate '--loglevel LEVEL' has been set.
To allow a non-zero RETCODE value, you must use any loglevel that
is not 'warning' or 'None' (default).
You can set the loglevel in the CLI with:
--loglevel <debug/info/warning/error/critical>
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I9484a750206a3f464c59952304e72c59c3d12465
[ROCm/amdsmi commit: cbb068ccac]
Changes made on rsmi_perf_determinism_mode_set function documentation
as well for styling consistency.
Change-Id: I09ce8139eb9cbda94352ac7725c4c9b9bb06bd59
[ROCm/amdsmi commit: aa5cba122c]
Match alignment of error output with general output
signed-off-by Elena Sakhnovitch
Change-Id: Id4334152f4ad5665ff37d5d47e6f7ca0107a9428
[ROCm/amdsmi commit: 5d5ba738db]
Hiding not applicable/unsupported sensors under INFO
Signed-off-by: Elena Sakhnovitch
Change-Id: I89c80ca7c6365ef3a2dd751a575ddf90044c8a2e
[ROCm/amdsmi commit: 0f88f59ddd]
If the FRU has been corrupted, then the serial number will come in with
any manner of random bytes, which will cause decode() to fail
spectacularily. Check that the serial returned by the kernel is
alphanumeric, and print to the error log if not (then continue to the
next device).
Change-Id: If4f35b140b6089e02729b1490ed6b48d614a122a
[ROCm/amdsmi commit: 6b6e840337]
Use GNUInstallDirs variables to determine the location of LIBDIR, BINDIR, INCLUDEDIR, DOCDIR
Note that CMAKE_INSTALL_LIBDIR is overriden, since the default for RHEL
is lib64, but ROCm packaging wants it to be lib always. Distros or users
can easily override this.
Change-Id: I616152ccd2bc1f5a60bffa940312b38ca6e88c04
[ROCm/amdsmi commit: b72c464ac0]
This patch changes the error handling for setClockRange.
When a device does not support modifying a clock type (sclk/mclk),
an error message is printed through the python CLI.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I37d9ea4189b1ca81e5deaab5efa6cfa4901b89b3
[ROCm/amdsmi commit: 2b8d0ad70f]
showpidgpus prints 'none' when no GPU devices are
being used by the running process. Adding a fix
to print a relevant message.
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Change-Id: I165a6644a76c8e1c3c3cad676dcfd41eb1c4724f
[ROCm/amdsmi commit: dcab886394]
This patch fixes a --showvoltagerange bug, which attempts to check
the voltage curve on a device that does not have any voltage
regions in its OverDrive voltage frequency data (odvf).
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I647c30c978ffb13f6819ac3d069ee340710a7f99
[ROCm/amdsmi commit: 786f66671a]
Fixes bug in the 'setPowerOverdrive' function which mishandles
GPUs with secondary dies. Secondary dies have a default power cap
of 0W and cannot be changed, so they are now skipped.
Fixes bug in the 'resetPowerOverdrive' function which incorrectly
resets the wattage to the current value.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I483fa3f58b1fa44a3bf7bae3b52c59ce523ae152
[ROCm/amdsmi commit: 4298cbb400]
1. Memory allocated for handle was not deleted
when no variant, subvariant or supported function
was found
2. handle->func_id_iter address was set to 0
before delete[]
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Change-Id: Iab50fdfbe03eec8e6fd0e84e03bd2c47e645b3d8
[ROCm/amdsmi commit: b23cfc0e82]
Show an optional debug log (RSMI_DEBUG_BITFIELD=2) to
the user in the following scenarios:
1. If more than one current frequency is found
2. If frequencies are not read in increasing order of
their value
If current frequency is not available, index for it is
set to -1, values will not have * next to it in the
output. This will also be handled in rocm_smi.py.
Signed-off-by: Divya Shikre <DivyaUday.Shikre@amd.com>
Change-Id: I477ec065f7513c8045d6392f12ef6cb835a6b8f6
[ROCm/amdsmi commit: afe996c2ed]
AravindanC
Charis Poag
Bill(Shuzhou) Liu
Ranjith Ramakrishnan
Ori Messinger
Harish Kasiviswanathan
Elena Sakhnovitch
kent.russell@amd.com
Sreekant Somasekharan
Alex Sierra
Galantsev, Dmitrii
Divya Shikre