KFDMemoryTest.DeviceHdpFlush requires device node 0 is large bar to
check VRAM content from CPU, run the test only if device 0 is large
bar GPU.
Change-Id: I874b153219550c50b724625e971e3ed3a84dc652
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Nodes with XGMI have no HDP, so DriverHDPFlush should skip.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: If5a87e660712e51d03e750d8e044786036b2e603
Even with the restriction to only compile on gfx90a, this
shader still fails CompileShaders test.
There don't seem to be any systems that actually use it.
Leave it in the shader store, but remove it otherwise
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I41bec6ba10363d42b163ac101c3a92edaad6d6df
A gfx940 code path was erroneously added to this shader.
It's unneccesary; without this path, the shader uses
the scalar store, which works just fine on gfx940 without changes.
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I825cbbebbdb25c4a7c2f16e228c2bea6a6bcc30c
gfx940 changed the semantics of the glc and slc coherency options
on vector stores and loads. This means that shaders that use
those bits no longer compile on gfx940.
Add precompilation if statements to those shaders to use the
new coherency bits.
Also add gfx940 to ASMTest so that compilation is tested.
Note: One of the tests enabled by this patch on gfx940,
KFDEvictTest.QueueTest, does not pass on gfx940 emulators.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I942f9d2536e9eb5510c4d5af30df6ff1a95c8cf7
Use q->total_mem_alloc_size for munmap in SVM codepath of free_queue.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I2fecaa1ddb337b1fe71f9cbba45a0c9467eff0c0
Currently, on queue destroy, context save restore memory is freed
only for a single XCC. Instead, we need to free the entire context
save restore memory, which was allocated for all XCCs.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: I51ebb12fa8d5ebed41979d68e74f7c5392dca062
Do not allocate the EOP buffer when not required.
Signed-off-by: David Belanger <david.belanger@amd.com>
Change-Id: I1664a3f0a882219a72278174006cdb8d46fd4f5e
Program ACCUM_OFFSET to match the number of VGPRS used
by the shader as part of Dispatch setup.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: Icfa1fbe4de2a62f00743de567f3ed382d3378b17
We used to report HSA_STATUS_ERROR_INVALID_ISA when receiving error code
128, but there are several other reasons why we could be exceeding
number of VGPRs, so updating the error code.
Change-Id: I6a6980d5b07b09c93d00dee5207a0d52399bc77e
In multi-partition modes, e.g. CPX, we want to create new file
descriptor despite using the same render node. Update
open_drm_render_device to use a gpu_id to fd map partitioned by render
node. Different gpu_id's requesting the same render node will be added
to that render node's map list for fetching its fd. Different gpu_id's
requesting different render nodes as well as the same gpu_id's
requesting the same render node will behave as they did previously.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Ie153d42355d4d75b1c6ba6ff40fac3295bc87009
Allocate debug area big enough for all XCCs in the partition. Also, fix
the cu_num calculations as driver now reports cu_num as the total number
of CUs in the partition.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: I6e80d57196b770bb3c2506bc58cb366c0046084b
Add gfx version for VGPR size per CU calc, add FAMILY_AV to KfdFamilyId,
add blacklist filter to kfdtest.exclude.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I9b8072e45f4d497e0a8fd3f8f97f1425238e8b42
Updates:
* [rocm-smi] Added larger app width size, which helps
display missing device info
* [rocm-smi] Added better context when rsmi_ret_ok
does not return with RSMI_STATUS_SUCCESS
* [rocm-smi] Removed all references to an
undefined function (printLogNoDev())
* [rocm-smi] Fixed not detecting non-int
values when setting the voltage curve
* [rocm-smi] Added better context on missing
sysfs file when setting clock overdrive
values
* [rocm-smi] Fixed getMemInfo() calls not
referencing tuple values (making it easier
to read)
* [rocm-smi] Silenced concise info spitting
out errors for missing VRAM files, instead
display which metric is "unsupported" if
the files are missing
* [rocm-smi] Updated function descriptions for
rsmi_ret_ok & getMemInfo
* [rocm-smi] Updated getMemInfo to provide a
quiet call, to silence for concise info calls.
This provides a way to keep the output clean.
* [rocm-smi-lib] Added when using debug sysfs
files, to state, which enums are enabled
for debug
Change-Id: I0e9e0c97ccf71467ced0e1a1f71803327a8be2b7
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
* causal backtrace updates
- fix initial causal sampling period value
* causal delay updates
- tweak handling of sleep_for_overhead
* Fix experiment global scaling for prog pts
- results in drastically improved predictions
* pthread_mutex_gotcha updates
- disable all wrappers during causal profiling
* validate-causal-json.py updates
- support decimal stddev
- fix setting stddev from command-line
* causal perform_experiment_impl update
- handle start failing because finalizing
* deprecate causal::component::sample_rate
- appears to not help at all
* Rework sample info
* Increase causal unwind_depth
- use OMNITRACE_MAX_UNWIND_DEPTH
* validate-causal-json updates
- min experiments
- exclude reporting predictions with less than X experiments at a given speedup
- percent samples
- only print samples within X% of the peak (default: 95%)
* Update timemory submodule
- extensions to sampling for signals delivered via non-timer method
- e.g. via HW counter overflow
* dwarf_entry::operator< updates
- sort via file
* causal profiling docs updates
- info about backends
- info about installing/enabling perf
* config updates: causal backend
- CausalBackend enum
- OMNITRACE_CAUSAL_BACKEND: perf, timer, auto
- omnitrace-causal option: --backend
* debug update
- use spin_mutex instead of std::mutex
* address_range::contains update
- range from 0-100 contains range from 10-100 but was returning false because high was == 100 not < 100
* symbol::operator< update
- handle load address differences
* sampling updates (non-causal)
- update get_timer to get_trigger + dynamic_cast
* container::static_vector updates
- support construction from container::c_array
- update_size private member func for handling atomic m_size
* Move perf files
- moved library/causal/perf.{hpp,cpp} to library/perf.{hpp,cpp}
* causal example update
- created impl.hpp (forward decls)
- renamed {cpu,rng}_func_impl to {cpu,rng}_impl_func
- only create two threads which run N iterations instead of two threads each iteration
* Update timemory submodule
- updates to unwind::processed_entry
- updates to procfs::maps
* Updated causal documentation
- fixed line numbers changed by modifications to causal example
* omnitrace-causal exe updates
- set OMNITRACE_THREAD_POOL_SIZE to zero by default
* core/containers updates
- static_vector: provide data() member function
- c_array pop_front() and pop_back() member functions
* core: config and argparse updates + perf
- core/perf.{hpp,cpp}
- forward decl of enums
- config-related capabilities
- argparse: --sample-overflow
- renamed some config functions
- e.g. get_sampling_cpu_freq -> get_sampling_cputime_freq
- added config settings related to overflow sampling via perf
- added timer_sampling and overflow_sampling categories
* Update timemory submodule
- sampling allocator flushing
* binary updates
- lookup_ipaddr_entry
- use bfd_find_nearest_line instead of bfd_find_nearest_line_discriminator
- discriminators are not used
- explicit instantiations of inlined_symbol::serialize
* Bump VERSION to 1.10.0
* sampling and perf updates
- support overflow sampling via Linux Perf
- update perf namespace
- update perf::perf_event
- update record ctor: pointer instead of const ref
- update open member func: return optional string
- add m_batch_size member variable
- sampling updates
- support overflow sampling
- flush allocators
- increase buffer size from 1024 to 2048
- restructure post-processing in light of perf overflow supports
- improve offload memory usage only load buffers for thread
- load_offload_buffer(tid) uses thread-specific filepos
- component updates
- backtrace_metrics::operator-=
- backtrace_metrics::operator-
- backtrace::sample does not record for overflow signal
- callchain: perf overflow sample
* core updates
- component::sampling_percent does not report self + uses_percent_units
* causal updates
- tweak get_line_info
- overloads for set_current_selection (uint64_t, c_array, std::array)
- delay
- use sampling::pause/sampling::resume
- experiment
- experiment::sample derives from unwind::processed_entry
- experiment::samples is vector instead of set
- fixed samples
- overloads for is_selected (uint64_t, c_array, std::array)
- scaling factor defaults to 100 instead of 50
- serialize updates follow change to experiment::sample
- modify algorithm for increasing/decreasing experiment length
- sample_data
- use map<uintptr, uint64_t> instead of set<sample_data>
- get_samples returns vector<sample_data> instead of set<sample_data>
- sampling
- support overflow via Linux Perf
- update causal_offload_buffer
- flush sampling allocator
- backtrace
- overflow component
* libomnitrace-dl updates
- handle dl::InstrumentMode::PythonProfile
* testing updates (causal)
- causal line 155 -> causal line 100
- causal line 165 -> causal line 110
* formatting
* exit_gotcha updates
- exit_info for abort()
- message about non-zero exit code
* testing updates
- fail regex for causal tests
- validate-causal-json: >= min_experiments instead of > min_experiments
- handle OMNITRACE_DEBUG_SETTINGS in omnitrace_write_test_config
* causal sampling updates
- add new lines where appropriate
* causal data updates
- reorder diagnostic info when experiment fails to start
* binary updates
- symbol address range from address to address + symsize + 1
- add 1 based on debug info
* causal data updates
- sample_selection wait_ns defaults to 1,000 instead of 10,000
- sample_selection wait scaled by iteration number
- save_line_info_impl verbosity
- print latest_eligible_pc when experiment does not start
* causal sampling + component updates
- perf backend disables component::backtrace
- ensure get_sampling_(realtime|cputime|overflow)_signal do not malloc
* causal: remove period stats
* validate-causal-json update
- fix --help
* causal data updates
- improve eligible pc history reporting when experiment fails to start
* causal data updates
- fix compute_eligible_lines_impl
- eligible address ranges returning too many ranges
- occasionally, overwrite all *true* eligible address ranges
* causal data updates
- reduce scoped ranges to symbol ranges
- is_eligible_address() returns true contains (not just coarse)
- revert some sample_selection behavior
* binary address_multirange updates
- make coarse_range private
- fix operator+=(pair<coarse, uintptr_t>)
* causal example update
- fix nsync to default to once per iteration
* binary analysis updates
- tweak header file includes
* causal updates
- remove factoring in sleep_for_overhead
- invoke delay::process() even if experiment is not active
* causal data updates
- update latest_eligible_pc structure
* update omnitrace-install.py.in
- fix support for fedora
- /etc/os-release does not have ID_LIKE
- fallback to RHEL 8.7 if version not specified
* update omnitrace-install.py.in
- fix support for debian
- /etc/os-release does not have ID_LIKE
- version mapping
* Update documentation
- update docs on installation
* causal data and experiment updates
- data: reset_sample_selection
* causal set_current_selection debugging
- debug messages for failed e2e runs
* causal data and backtrace component updates
- data: set_current_selection returns the number of eligible addresses added
- backtrace: if cputime signal has selected zero IPs > 5x, then realtime signal starts contributing call-stacks
* core library updates
- move config::parse_numeric_range to utility namespace
- add core/utility.cpp
- support range:increment, e.g. 5-25:10 expands to '5 15 25' instead of '5 10 15 20 25'
* omnitrace-causal update
- end-to-end expands all speedups
- support range:increment in speedups
* causal backtrace updates
- remove select_ival (realtime signal always contributes when select_count == 0)
* containers: static_vector update
- explicit c_array constructor
- explicit std::array constructor
* causal data updates
- remove set_current_selection(uint64_t)
- remove set_current_selection(std::array)
- sample_selection increase default wait time
- report eligible PC candidates
- move reset_sample_selection to perform_experiment_impl
- decrease latest_eligible_pc array size
- set_current_selection does not guard for experiment::active
* core debug updates
- OMNITRACE_PRINT_COLOR macros
* causal data updates
- tweak to experiment never started message
* causal gotcha updates
- remove unused code
* critical trace updates
- remove unused code
* omnitrace-causal
- OMNITRACE_LAUNCHER
* causal data updates
- don't fail on end-to-end + omnitrace-causal
* causal backtrace updates
- reintroduce select_ival behavior
* causal data updates
- tweak verbose messages about number of PC candidates
* core mproc updates
- utilities for waiting on child PID and diagnosing status
- omnitrace::mproc::wait_pid
- omnitrace::mproc::diagnose_status
* omnitrace-run updates
- support --fork argument for executing via fork in current process + execvpe on child instead of execvpe in current process
* omnitrace-causal updates
- wait_pid and diagnose_status just call equivalent functions in omnitrace::mproc
* ubuntu-focal workflow update
- attempt to launch ubuntu-focal-codecov job with CAP_SYS_ADMIN and use perf backend
* tests reorg and updates
- remove binary-rewrite-sampling and runtime-instrument-sampling tests
- rename *-preload tests (which use omnitrace-sample exe) to *-sampling
- split tests/CMakeLists.txt into several tests/omnitrace-<category>-tests.cmake files
- tweak to causal-both-omni-func test
- add args: -n 2 -b timer
* update validate-causal-json.py
- better reasoning info for adjusting tolerance
- always apply tolerance adjustments in CI mode
* causal e2e tests update
- add label "causal-e2e" label
- tweak params
- old: 80 12 432525 500000000
- new: 80 50 432525 100000000
- disable processor affinity for slow-func/line-100 tests
- artificially inflates some speedups with perf
* unblocking_gotcha updates
- overload operator() according to gotcha function index
* blocking_gotcha updates
- overload operator() according to gotcha function index
- fix bug where potentially post block functors (e.g. pthread_mutex_trylock) throw error if lock is not acquired.
* parse_numeric_range update
- support unordered_set
* config update
- OMNITRACE_DEBUG_{TIDS,PIDS} use parse_numeric_range
* Long workload name layout fix (#269)
* changed layout to fit experiment names
- added span to show full name
- shortened name to fit dropwdown
- changed layout for added consistency
* layout Fixes
- refresh button is to the right
- header is more consistent across different width screens
* header layout update
- center div makes turns into multiple lines if not all items fit
* slight improvement for header/graph spacing
* Fixed refresh button shape and function
- moved find_causal_files to parser so that main and gui can access
- resized refresh width to allow for same shape across different screens
* all graphs now have the same width
- graphs now have same width
- chart headers start well below the header with filters
---------
Co-authored-by: Jonathan R. Madsen <jrmadsen@users.noreply.github.com>
* Causal GUI: Linting, synced y-range, remove unused imports/variables, and bug fixes (#274)
* GUI: python linting workflow
- runs flake8 on code in source/python/gui
* GUI: flake8 settings in source/python/gui/setup.cfg
- ignore E501 errors (line too long)
- ignore W503 errors (line break before binary operator)
* GUI: setup.py updates
- remove unused imports
* GUI: __main__.py updates
- stddev is float value
- remove unused imports
- effectively propagate the --stddev argument
* GUI: gui.py updates
- remove unused imports
- fix light mode
- sync initial y range of all causal plots
- fix error bars for causal data
- set x-ticks to 5
- set y-ticks to 10
- only display top 99% of samples
- separate global declarations and assignments to global values
- remove unused variable assignments
- fix mislabeled function_regex and exp_regex
- change if X == False to if not X
* GUI: header.py updates
- remove unused imports
- fix mislabeled function_regex and exp_regex
* GUI: parser.py updates
- add set_num_stddev function for manipulating global num_stddev value
- remove unused variables
- fix latency point object (duplicated __init__ function)
- fix handling latency in JSON
- fix formatting of validation format error message
- replace if X == False with if not X
- fix unused dataframe creation in add_latency
- fix flake8 do not assign lambda for name_wo_ext (use def)
* GUI: gui.py updates
- replace misnamed "func_list" with "experiment_list"
- replace misnamed "exp_list" with "progpt_list"
* GUI: fix python workflow
- quote python versions to avoid truncating 3.10 to 3.1
---------
Co-authored-by: JoseSantosAMD <87447437+JoseSantosAMD@users.noreply.github.com>
One some platforms, e.g Arch Linux, -D_GLIBCXX_ASSERTIONS compile flag
is enabled by default, causing a runtime assertion.
Avoid assertion by using std::vector accessor function data().
Change-Id: I118cdf102c3e353f32c618823e363ee1059f3453
Some applications will keep trying to allocate device memory until the
allocation fails. This causes all device memory to be used up and we are
then unable to allocate scratch memory for dispatches. Reserve enough
memory for 1 small scratch allocation.
Change-Id: I968400d41540ba1aca8f28581f229693eec02225
Instead of hard-coding lib64 and other include locations, just prepend
the DRM_DIR to the beginning of the CMake prefix path. Then let
pkgconfig find the package, the same way that it would if DRM_DIR wasn't
set. DRM_DIR takes precedence, but the default paths will be used if
DRM_DIR isn't set, or doesn't point to where libdrm is housed
Note that /lib and /lib/$ARCH aren't required for DRM_DIR, just the
path to the root folder for the package (e.g. /opt/amdgpu instead of
/opt/amdgpu/lib or /opt/amdgpu/lib64 or /opt/amdgpu/lib/x86_64-linux-gnu
etc)
Change-Id: I56767db28476d14e3fa77be1089c3904e2a32450
Updates:
* VoltRead - needed to properly send out RSMI_STATUS_NOT_SUPPORTED
when device does not have voltage hwmon files
* ComputePart. - test failure was likely caused due to EvtNotif
causing conflicts (unknown exactly why). Test passes when
moving it ahead of the event notifier. Both API calls may have
a system resource issue, TBD.
* rocm_smi_example - now indicates when an API call
returns RSMI_STATUS_NOT_SUPPORTED or
RSMI_STATUS_NOT_YET_IMPLEMENTED. Allows example to fully complete
on systems which may not provide support for all API calls.
Change-Id: I520b8584e078d412414e8e5797c664220a7e823a
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
The print statement had extra character 'f' resulting in syntax error and rocprofiler runtime package was not getting generated in centos
Change-Id: Ib4472f4879c4c50ffb00e8336ceef818021c965f
* omnitrace-avail updates
- enables text wrapping for descriptions
- reworks the HW counters display layout
- added new column "Device" which has either "CPU" or "GPU"
- support sorting HW counters alphabetically
- fixed some minor csv issues
- reorganize the order of the argparse arguments
* Fix tests
Revert agent_info->dev_index in hsa_rsrc_factory.cpp
- disable using the driver_node_id and, instead, start at zero
because it breaks the lookup for rocprofiler_pool_fetch
lookup in rocprofiler.cpp. On my system (one AMD GPU and
one NVIDIA GPU), it has a value of 1, not 0 and the pool
size is 1 -- resulting in segfault
* rocprofler_iterate_info workaround + omnitrace-avail update
- provides workaround for rocprofiler_iterate_info behavior change in ROCm 5.4.0-3
- update timemory submodule with argparse tweaks
- updates hsa_rsrc_factory.{hpp,cpp}
- colorized log in omnitrace-avail
- Bump version to 1.9.2
* Fix empty_base inheritance
- timemory's component::empty_base inherits from concepts::component so direct inheritance was removed
* Fix OMNITRACE_HIP_VERSION_COMPAT_STRING
- defined as "" when OMNITRACE_HIP_VERSION_MAJOR==0
* new defines + extra info
- define OMNITRACE_LIBRARY_ARCH (via CMAKE_LIBRARY_ARCHITECTURE)
- define OMNITRACE_SYSTEM_NAME (via CMAKE_SYSTEM_NAME)
- define OMNITRACE_SYSTEM_PROCESSOR (via CMAKE_SYSTEM_PROCESSOR)
- define OMNITRACE_SYSTEM_VERSION (via OMNITRACE_SYSTEM_VERSION)
- define OMNITRACE_COMPILER_ID (via CMAKE_CXX_COMPILER_ID)
- define OMNITRACE_COMPILER_VERSION (via CMAKE_CXX_COMPILER_VERSION)
- include this info in metadata
- include subset of this info in --version for bin tools
- tweak to perfetto verbose messages
Philip Yang
David Francis
Ori Messinger
Graham Sider
Mukul Joshi
David Belanger
David Yat Sin
gobhardw
Hao Zhou
Charis Poag
Jonathan R. Madsen
coleramos425
colramos
Ammar ELWazir
Giovanni LB
Sriraksha Nagaraj
Bill(Shuzhou) Liu
Kent Russell
Galantsev, Dmitrii
Icarus Sparry
Ranjith Ramakrishnan
Nirmal Unnikrishnan
AravindanC