Add base debug operations to suspend and resume queues.
Routine will return the number of queues successfully
suspended or resumed.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Change-Id: I8f18317f70464b04231c5cf822e11d545ebfa02a
Check that a jump to trap event can be picked up by the debugger.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Change-Id: Iad5f87092f2b82d5018013bba548979122a9bd02
Add debug attach and runtime enable test for attaching to a spawned and
running process.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Change-Id: I72302ff73494d9dae0c79a299508085d7ca0552b
Add base debug class and attach/detach operations.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Change-Id: I60f3c166646f05838fec208ac2f59bba998c63f8
For xnack off, skip SVM evict tests if memory allocation size is larger
than 15/16 total system memory, because the test may fail to allocate
CWSR svm range to create queue after allocating test memory.
Limit eviction size from total VRAM size to 1/2 total VRAM size,
because for 192GB VRAM, evict 192GB may takes more than 120 seconds
and cause test timeout failed.
Change-Id: Ib1483b9aab580a8539187b2943cadea0fd5a7c71
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
For --node and --exclude, these flags take arguments, but usage was
unclear. This led to attempts like --node=1 , which will not work
appropriately. Add examples for flags that take parameters, as well as
the requirements for those parameters. Also change --exclude parsing to
match --node parsing, for consistency
Change-Id: I563ba9b370a24d9a84b9c39093f3cb1a5d723cef
GFX11 will no longer use GWS for cooperative launch so disable the test.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Change-Id: I8611c8158e1654782150ad10f1f65edb578e6435
The purpose of this patch is to fix an issue in kfdtest.exclude's
blacklist for KFDSVMRangeTest.ReadOnlyRangeTest.
Excluding "KFDSVMRangeTest.ReadOnlyRangeTest" without adding a "*"
to the end causes the test to still run, since after a recent patch
the test actually runs these two variants instead:
-"KFDSVMRangeTest.ReadOnlyRangeTest/0"
-"KFDSVMRangeTest.ReadOnlyRangeTest/1"
(For XNACK OFF/ON)
Now, the test is excluded as "KFDSVMRangeTest.ReadOnlyRangeTest*"
to cover those two XNACK ON/OFF variants.
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I067c4c99fe839ce6cec5d134bd605e8cb41b8291
The purpose of this patch is to fix an issue in the run_kfdtest.sh
script's gfx_target_version parsing.
When the character length of the "gfx_target_version" value is
equal to 5 instead of 6, it will now be zero padded on the left to
allow each Major/Minor/Stepping value to be parsed correctly.
Also, kfdtest.exclude file now replaces the default filter for
aqua_vanjaram with the following 3 gfx filters:
gfx940, gfx941, & gfx942
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I1f0264d3705803f24ad3c458e6bd367fbbec62be
This has slowly become less and less reliable on more and more ASICs,
so just blacklist it altogether. Using wall clock for performance
is not a reliable method for testing performance, so skip it to avoid
more failure reports on various systems.
Change-Id: I1a5744604e4620bc7675a629d146ba4ffba669d2
If asics don't need software traps within GFX11 domain,
test with COMPUTE_PGM_RSRC1.PRIV = 1 will make system hang.
Change-Id: I00cf8eb6d6b07856885c77bd343ca3c41cc3cad5
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Typo to calculate bufferSize from vramBufSizeInPages. The OOM shows up
only with HSA_XNACK=1 because HSA_XNACK=0 doesn't support VRAM
oversubscription. We changed to run SVM tests with both XNACK off and
on.
Change-Id: I3949959288fd92f4e7f4a87115a5f1547e225042
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Add 5 different test scenario to cover new event age tracking features.
Change-Id: Icab43240fd127208b18abbd7542d6444127ef0c7
Signed-off-by: James Zhu <James.Zhu@amd.com>
The purpose of this patch is to fix a minor typo in KFDSVMRangeTest.
Before:
"Skipping test: no enough system memory."
After:
"Skipping test: Not enough system memory."
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Change-Id: I247cb558a177a1d25c393bf16c7386f4d79d0fba
KFDQMTest.MultipleCpQueuesStressDispatch is fixed as of MES SCHQ version
0x3c ().
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I437f3eb5f12dc159339a9b7c7cff2e2b8214ad7c
Compiler behavior is undefined if the right operand is negative,
or greater than or equal to the width of the promoted left operand.
For release builds with address sanitizer enabled, this compiler
optimization behavior leads to unsupported queue size value since
current method shifts till 128 bits on a 64 bit value.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Change-Id: Iafdc82d0dfb7f79e3012fb7bb70eda80e4b7a7a6
Have hsaKmtMapMemoryToGPU return same value as fmm_map_to_gpu to keep consistency.
Signed-off-by: Xiaogang Chen<Xiaogang.Chen@amd.com>
Change-Id: Ifabb72301e1d5a6c1310973bb1321714e12a1fa6
Alloc vram by kfd, then map by GEM api to GPU VM and map to CPU VM.
Signed-off-by: Xiaogang Chen<Xiaogang.Chen@amd.com>
Change-Id: Ib5b2f35662cd5473f622f6ffc9b62925fe57ae42
Add parameterization for KFDSVM tests so that we test with both XNACK
enabled and XNACK disabled. This will be overridden by HSA_XNACK, if set
Change-Id: Ie96eb61c03115f947e08cfa076ac459f7440f5d8
For aqua_vanjaram APU mode, KFDEvictTest and KFDSVMEvictTest are
skipped. Those tests passed on dGPU mode with memory reporting partition
support on GFX 9.4.3.
Change-Id: I56357843c6743b01b807359dbb37b32391fd9a25
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
When we merge thunk into ROCr, kfdtest will be in a different folder
structure. Add the new location to ensure that we can build now and in
the future with no disruptions
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I6517e061cb0da7137d903abbc380bfc7126f40d4
Starting with GFX11, wptr BOs must be mapped to GART for MES to determine work
on unmapped queues for usermode queue oversubscription (no aggregated doorbell)
Change-Id: I10e30fdc2bec587cef9427faa4874957988c34b3
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
If MES is enabled, wptr has to be non paged memory,
Add an API to check this condition.
Change-Id: I53af1f6687d5332d102e7062c3d760e33b96e722
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
If Dev0 and Dev1 are not the same gfx, we should temporarily
set the target ASIC for compiling Shader code.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Shikai Guo <shikai.guo@amd.com>
Change-Id: I5836beb16ade519f5a148d3d2b9c2875554f0c35
Overload Assembler::RunAssembleBuf to take in an extra Gfxv parameter.
Using this overload will temporarily set the target ASIC to Gfxv before
calling RunAssemble, and copy back the original MCPU literal upon
completion. The copy to reset the original MCPU in this case is safe as
the MCPU length is always known.
This will be useful in multi-device test cases whereby the devices are
not necessarily the same gfx version. The overload is explicitly for the
RunAssembleBuf wrapper rather than RunAssemble to ensure the default
MCPU is always reset independent of errors in RunAssemble.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I7fe5a962876314b6df32e4b7160174949d98f9e3
LLVM MC does not seem to accept multi-line conditionals. This may be
fixable in the future with macros. The Aqua Vanjaram shader spec states
that while buffer_invl2 has been replaced by buffer_inv, the former may
still be used for compatibility. However, this does not seem to be
implemented. For now, fix conditional.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I7f8b64c96055371d7e0090b758d2cfd2a37ecd3c
These tests should also pass on Aqua Vanjaram, so enable them
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Ibbb9cd43d653c63b08c39efd1d7326cfac1f8411
Aqua Vanjaram is intended to have fine-grained coherency
from anywhere to anywhere else using read-acquire and
write-release primitives.
Add a test that writes to memory covered by five
different cache lines, then write-releases, while
another thread read-acquires, then reads those
five locations in memory.
There are nine variations of the test to cover
CPU-GPU, same-GPU and across-GPU, vector instructions and
scalar instructions, and data local to the
acquirer or receiver.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I20d2db5c53bd280e971479aad7e61df6ed5d3623
For vector iterator loop access current node directly, don't need
gpuNodesAll.at(i), which also causes out of range access.
Change vector index loop to iterator loop to simplify the code.
Change-Id: I2627ef8d13b5d2c9cd8c51cf4dacc3e8a97fcfb0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
AppAPU VRAM is part of system memory managed by Linux kernel, no
VRAM eviction and restore is needed between VRAM and system memory.
Those Evict test failed on AppAPU now, skip those tests on AppAPU.
No page migration between VRAM and system on AppAPU, HMMProfilingEvent
depends on migration event, skip it on AppAPU.
Change-Id: I4c809b97c947e809d136c1f88db2278cf74f5b47
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
If there is connection between GPU and CPU with weight 13,
KFD_CRAT_INTRA_SOCKET_WEIGHT, then this is AppAPU.
This will be used to skip tests not suitable for AppAPU.
Change-Id: If6fad81528b52afd4ac4cefa508d787b0f6637ca
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
For GC 9.4.0, modifications were made to various shaders since certain
flat_ instructions no longer support glc/slc modifiers (replaced with
nt/sc1/sc0). Instead of repeating conditionals inside various shader
bodies, we can make use of LLVM AMDGCN macros.
This patch modularizes the shader macros into seperated defines. Prior
to the core raw-string literal, each shader now starts with the
SHADER_START literal (".text\n") plus any number of SHADER_MACRO_*
literals. This allows us to seperate the macro definitions logically and
use the pre-processor to only include the required macro groups on a
per-shader basis.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I19eb3fd14252a0601bb7509249051b68e7fdb02a
Previously, KFDEvictTest.QueueTest and KFDSVMEvictTest.QueueTest
would create a variable number of wavefronts, one for each 64MB
of memory under test. This ran into limits on the buffers used
by the wavefronts, and may at some point have exceeded the
wavefront limit.
Restrict the number of wavefronts to 512, and adjust the shader
to accomodate a variable buffer size
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I2ec292e2900e2efa62a08313bca3d2f4bdabca8b
KFDMemoryTest.DeviceHdpFlush requires device node 0 is large bar to
check VRAM content from CPU, run the test only if device 0 is large
bar GPU.
Change-Id: I874b153219550c50b724625e971e3ed3a84dc652
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Nodes with XGMI have no HDP, so DriverHDPFlush should skip.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: If5a87e660712e51d03e750d8e044786036b2e603
Even with the restriction to only compile on gfx90a, this
shader still fails CompileShaders test.
There don't seem to be any systems that actually use it.
Leave it in the shader store, but remove it otherwise
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I41bec6ba10363d42b163ac101c3a92edaad6d6df
A gfx940 code path was erroneously added to this shader.
It's unneccesary; without this path, the shader uses
the scalar store, which works just fine on gfx940 without changes.
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I825cbbebbdb25c4a7c2f16e228c2bea6a6bcc30c
gfx940 changed the semantics of the glc and slc coherency options
on vector stores and loads. This means that shaders that use
those bits no longer compile on gfx940.
Add precompilation if statements to those shaders to use the
new coherency bits.
Also add gfx940 to ASMTest so that compilation is tested.
Note: One of the tests enabled by this patch on gfx940,
KFDEvictTest.QueueTest, does not pass on gfx940 emulators.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I942f9d2536e9eb5510c4d5af30df6ff1a95c8cf7
Program ACCUM_OFFSET to match the number of VGPRS used
by the shader as part of Dispatch setup.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: Icfa1fbe4de2a62f00743de567f3ed382d3378b17
Add gfx version for VGPR size per CU calc, add FAMILY_AV to KfdFamilyId,
add blacklist filter to kfdtest.exclude.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I9b8072e45f4d497e0a8fd3f8f97f1425238e8b42
Instead of hard-coding lib64 and other include locations, just prepend
the DRM_DIR to the beginning of the CMake prefix path. Then let
pkgconfig find the package, the same way that it would if DRM_DIR wasn't
set. DRM_DIR takes precedence, but the default paths will be used if
DRM_DIR isn't set, or doesn't point to where libdrm is housed
Note that /lib and /lib/$ARCH aren't required for DRM_DIR, just the
path to the root folder for the package (e.g. /opt/amdgpu instead of
/opt/amdgpu/lib or /opt/amdgpu/lib64 or /opt/amdgpu/lib/x86_64-linux-gnu
etc)
Change-Id: I56767db28476d14e3fa77be1089c3904e2a32450
See description of previous revert.
This reverts commit 564913526a.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I969dc6469e62b50cd7ba0595918538602afa7516
This patch and the previous made it such that the queue ring buffer was
allocated as non-paged for GFX11+. The queue ring buffer should not be
mapped as non-paged; the non-paged requirement on GFX11 is only needed
for the queue wptr.
This patch was causing issues on various tests, such as intermittent
CP_INTSRC_BAD_OPCODE interrupts.
This reverts commit e40ae8481e.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I55b64aed73dc3b792f0756ae00daf6e10d93ce10
Jonathan Kim
Philip Yang
Kent Russell
Ori Messinger
Ruili Ji
James Zhu
Graham Sider
Sreekant Somasekharan
Xiaogang Chen
Yifan Zhang
Shane Xiao
David Francis
Mukul Joshi