The return code is just -1 if any error occurs. To detect debugger
unavailable we need to check the actual ioctl error code.
Change-Id: I8a294c754196aec916809497ec8e810da2f072b8
Signed-off-by: Sean Keely <Sean.Keely@amd.com>
For userptr, after taking aperture lock, decrease registration_count and
ensure object registration_count equal to 0 to release KFD and thunk
object.
Move decrementing of registration count from fmm_deregister_memory into
__fmm_release to avoid a race condition when dropping the aperture lock
in fmm_deregister_memory.
Change-Id: I5381fa6b8a77a1516af2554e5174e91969c338c4
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
This test requires KFD patch "drm/amdkfd: SVM map to gpus check vma
boundary" to pass, the patch is on staging-dkms branch, not land on
mainline branch. Temporary blacklist this to unblock QA, as QA reports
kfdtest failure.
Change-Id: I00515cd5d5d1c5612f4f8d48605d86f4a7e62ce2
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
After adjusting the memory usage, re-enable KFDEvictTest.BasicTest on
gfx906 and KFDEvictTest.QueueTest on GFX10
Change-Id: I401e679e447f3150241078154635f0b30692513d
Signed-off-by: Kent Russell <kent.russell@amd.com>
We were hitting memory map errors and segfaults when trying to use 7/8
VRAM on certain cards (dmesg showing "Failed to map to gpu 0/1"), as the
original check didn't see if this would exceed the GTT size.
Allocate the smaller of 1/3 of SRAM or 7/16 of VRAM (7/8 / 2) for the
tests
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: Ic11a5cee058535418eef903a28846e00e1839969
SDMA firmware of gfx902 has a regression which causes cp hang
in kfdtest, blacklist related test cases.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: Ie75b72a952a29d6b1394c5fcb67ff9a5143b3b07
This is required for Marketing Name, but Marketing Name isn't a hard
requirement for ROCT, so make it a Suggested package
Change-Id: Ibafcce2c59dc8bdba90c171e766122bebf548a48
Signed-off-by: Kent Russell <kent.russell@amd.com>
This was never validated on GFX10, so remove it for now until it's
either validated and confirmed, or move the check to the test itself
Change-Id: Ie4d8b31885fbe6e5ed84b7b174c0bfed60879741
to faciliate debugging, print errno when queue destroy fail
current log give very little information when fail:
[ RUN ] KFDQMTest.AllSdmaQueues
[ ] Regular SDMA engines number: 1 SDMA queues per engine: 2
[ OK ] KFDQMTest.AllSdmaQueues (11 ms)
[ RUN ] KFDQMTest.AllXgmiSdmaQueues
[ ] XGMI SDMA engines number: 0 SDMA queues per engine: 2
[ OK ] KFDQMTest.AllXgmiSdmaQueues (6 ms)
[ RUN ] KFDQMTest.AllQueues
/home/foreman/build/hsakmt-roct-amdgpu-1.0.9.40500/sources/libhsakmt/tests/kfdtest/src/KFDQMTest.cpp:381: Failure
Value of: (cpQueues[i].Destroy())
Actual: 1
Expected: HSAKMT_STATUS_SUCCESS
Which is: 0
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Change-Id: I5b1b5b616a5fd7ff198360c893a7aeed685022bd
After calling ioctl to create userptr obj, take aperture lock, check if
there is same userptr obj created after finding object, to catch the
race that multiple threads register same userptr to multiple GPUs.
If same userptr obj exist, then increase userptr registeration_count,
and free the newly create obj.
Change-Id: I63ae3a4f54da8aedd11c124d8d53ebe727b8203a
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Map readonly range to GPU, test GPU can read range but write to
range trigger GPU vm fault.
Change-Id: Id2ce106055a353f21f4c34fa7f562d546523bc49
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
To test if SVM support address mmap on file backed memory.
Change-Id: I227cc0b44d167c4fa2e63257e13a481aefa4f750
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
g_props is intialized in topology_take_snapshot which needs to call
hsaKmtAcquireSystemProperties. In hsaKmtOpenKFD, it doesn't call hsaKmtAcquireSystemProperties.
So it needs to change parameter of topology_is_svm_needed from node_id
to EngineId to avoid Segmentation fault on gfx902.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Change-Id: Iba8d20a9142510c70927454d26bdcaf579ad5574
Use the database provided by libdrm-amdgpu,as this is maintained by AMD
Signed-off-by: Mike Li <Tianxinmike.Li@amd.com>
Change-Id: I319a46d833cb23173a77fdff1deae69ea58588b8
Consolidate all thunk components into a single development package
Also declare build dependencies via find_package/library and report the
location of said dependencies during build time
Change-Id: I8524ad1a2d9a664accd93471abacc4bac82b9a7c
Signed-off-by: Kent Russell <kent.russell@amd.com>
Update KFDCWSRTest.BasicTest to run CWSR test with legacy HWS,
MES, and software scheduler.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Change-Id: I09af904507109c2bbbace6ff616a57fa2b1b8aa9
This is reported as failing on pretty much every ASIC, so move it to the
temporary exclude list for all ASICs until the test can be fixed.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Change-Id: I2973feb5705c178db32009e4603376d1f5e94a2f
If lookup is successful, device info from find_hsa_gfxip_device() is
used to populate props->EngineId.ui32 gfx version fields and node CAL
name (props->AMDName).
If unsuccessful, uses gfx_target_version sysfs field if present
(otherwise results in error), and sets the node CAL name to
"GFX<GFX_VERSION>" (e.g. 9.0.8 -> GFX090008).
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Id39c521b769aebbe40c934f19e03150a66884cce
Some g_system and Node ID checks already performed by validate_nodeid().
Fixes bug where hsaKmtGetNodeProperties() would return on
validate_nodeid() error without releasing lock. Switches some
conditionals to return INVALID_NODE_UNIT instead of INVALID_PARAMETER if
NodeId >= NumNodes. Removes some g_system assertions to return error
code rather than trigger a hard fault.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Id1604b20c2cef8808b98cdad61bd47aa7ea3d229
All conditional logic previously dependent on asic_family now dependent
on gfx version. As such, HSA_FORCE_ASIC_TYPE is now deprecated and
HSA_OVERRIDE_GFX_VERSION should be used instead.
device_info structs containing asic_family, eop_buffer_size, and
doorbell_size removed (alongside dev_lookup_table[]). eop_buffer_size
and doorbell_size now determined via macro, with eop_buffer_size and
full gfx version field being added to queue struct.
Certain funcs previously dependent on DID or GPU ID now dependent on
Node ID (due to use of get_gfxv_by_node_id()).
Fixes sleeper bug where ctl_stack_size and debug_memory_size were being
incorrectly programmed on gfx90a.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Iaabdc5c73920ad83b4b379cd6086992357b8ff10
get_block_properties() switch statement now based on major GFX version
instead of asic_family. Addition for NPI bringup only needed on major
GFX revisions unless differing perf_counter_block assignment necessary.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Ia02676d2a3a8f968b67feeafbab534ef4c01c0dd
Add defines for converting between full gfx version (in decimal) to
major/minor/stepping values, and major/minor/stepping values to full gfx
version (in hex). The first is to be used when grabbing the gfx version
from sysfs, the second when returning the gfx version in
get_gfxv_by_node_id() for comparisions in Thunk.
Add enum for defines of full gfx versions for various cards. These are
to be used in conditionals to replace CHIP_*/asic_family comparisons. On
NPI bringup, addition to this enum will not be required for
functionality unless explicitly needed for a conditional. Most ASICs in
this enum simply for completeness.
Add get_gfxv_by_node_id(): returns full gfx version in hex.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I9d1dba7fdd4a587a000eea2f4141a1d301bf4776
This was an implicit requirement, but the change to needing libdrm/drm.h
means we should be explicitly looking for this package during the build
Change-Id: I75064bf6f5477cb1ca99318681afca76c0060f72
Expand check control stack size for Beige Goby, Van Gogh and Yellow Carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Change-Id: I6c8345bbb751eb9179fc740fe1674504b4295a5f
Put CHIP_gfx90a next to CHIP_gfx908 to keep all the GFXv9
chips together.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Change-Id: I32b4b7f7746ae4bdaff7e178f13307c1bcfa93e1
Query pointer info return HsaPointerInfo with MemFlags for all pointer
type now.
Change-Id: I3c02b7b71ba0af953035e3ed9cd6bb6435bb9b65
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
hsaKmtAllocMemory with mflags.HostAccess=1 will fail on desktop gfx1xxx GPU
because it's small bar PCIe. Remove this flag.
Child process exit status should use current_test_info, not unit test
info.
Change-Id: I060f23aa98a42251921d003878e70a409c92a4de
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Parent process alloc memory with specific HsaMemFlags, child process
import the memory handle exported by parent process, query shared memory
pointer info, verify it has same HsaMemFlags.
If child process test failed, exit with error code to notify parent
process.
Change-Id: I5c9534e931b4565186d27124868799b893504c81
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Test if query userptr pointer info return correct alloc flags,
CoarseGrain by default.
Test if query hsaKmtAllocMemory pointer info return correct alloc
CoarseGrain flags.
Change-Id: If3a1175645717e5d7c475d6ff35b02d6876a1f7c
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Register graphics memory should always coarse grain.
Change-Id: I9d056b41287fa63247a042e5530ba29d535173ea
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
hsaKmtQueryPointerInfo return vm_obj flags for all below registered
memory types other than hsaKmtAllocMemory, and set the CoarseGrain flag
correctly for:
Graphics: always coarse grain.
Shared: hsaKmtShareMemory pass mflags with export handle to KFD to store
in KFD objs, hsaKmtRegisterSharedHandle get mflags from KFD with import
handle.
Userptr: it is already coarse-grain by default, or based on mflags
provided in hsaKmtRegisterMemoryWithFlags call.
Change-Id: Idc23e8b0cf599b02580737639da2f9ef4ccd0c0d
Signed-off-by: Philip Yang <Philip.Yang@amd.com>