* Remove vm checks in rocm-smi
* Move virtualization checks up the stack into amd-smi
---------
Signed-off-by: adapryor <Adam.pryor@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
Changes:
- This aligns back to original struct naming for ROCm 7.0. This removes
any Major ABI breakages for updates for 7.0 release.
- Minor ABI breakage is required since there were additions to the
header. Refer to changelog for these updates.
Change-Id: If35af74eac6beac8c267d05ce789b7761ed24bff
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Changes:
- Update violation status logic and metric naming for XCP/XCC metrics (thrm/thm consistency)
- Added XCP identifier in monitor to allow partition metrics to be shown with applicable APIs
(Violation Status is the first example of this in monitor)
- Improve CLI monitor output:
support multiple GPU lines per GPU, add new columns, and better formatting
- Refactor helpers and logger for flexible unit formatting and table rendering
- Add examples for amdsmi_get_gpu_pm_metrics_info()/amdsmi_get_gpu_reg_table_info()
new metrics APIs in C++ example
- Sync Python/C++ interface and structures for new metrics fields and naming
- Remove deprecated/unused RSMI activity APIs, documentation not needed since
the APIs no longer exist in ROCm SMI either.
- Cleanup metric violations + fix handle watch arguments
- Provide better handling/doc for average_flattened_ints()
- Group xcp metrics with brackets in human readable + adjust output size
Signed-off-by: Poag, Charis <Charis.Poag@amd.com>
Description:
- Added a new API `amdsmi_gpu_driver_reload()` to reload the AMD GPU driver independently.
- Updated CLI (`sudo amd-smi reset -r`) and Python bindings to support driver reload functionality.
- Removed automatic driver reload from `amdsmi_set_gpu_memory_partition()` and `amdsmi_set_gpu_memory_partition_mode()`.
- Enhanced CLI and test cases to allow users to control when the driver reload occurs.
- Updated documentation and changelog to reflect the new driver reload process.
- Improved error handling and logging for driver reload operations.
- Added progress bar and user confirmation prompts for driver reload commands.
* Update build/test strategy to only allow one test execution at a time
* Modify API verbage + modify systemctl error output
- Systemctl is typically not enabled on docker.
- And is an edge case for gpu being active process/etc for display devices.
* Remove AMDSMI_STATUS_AMDGPU_RESTART_ERR from the return values
* Move driver reload to after we save original compute partitions
---------
Signed-off-by: Charis Poag <Charis.Poag@amd.com>
Add support to Query UBB/OAM temperature.
* Updated Python API with new temperature metrics enum
---------
Co-authored-by: Bill Liu <shuzhliu@amd.com>
Co-authored-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
Moved the bit_rate and max_bandwidth back into links in the
amdsmi_link_metrics_t struct as this change was impacting
other teams. Modified the C and python API's, wrapper, and
CLI accordingly.
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Modified the file used to fetch process name so that complete name with path can be displayed.
Changes:
amd-smi monitor -q
- human readable format will output only the process name
- csv and json formats will print the full path
amd-smi process
- name will always be the full path to the process
amd-smi (default output)
- name will always be truncated.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
The bug was reproduced like this.
In terminal #1, run command:
sudo amd-smi ras --cper --gpu 6 --severity all --folder /tmp/cper_dump --follow
In terminal #2, inject errors:
while true; do sudo amdgpuras -b 7 -s 1 -m 6 -t 2; sleep 2; done
The terminal #1 starts dumping cper entry information that it captures. After 20 entries have been captured, open terminal #3 and run same command as terminal #1:
sudo amd-smi ras --cper --gpu 6 --severity all --folder /tmp/cper_dump --follow
From terminal #3, there will be no output, even when terminal #1 continues capturing and printing information.
The fix:
Since we already have more than 20 CPER entries available in the GPU buffer, when we run the command from terminal #3 to start capturing from the beginning and pass 20 buffers to copy entries to, the C++ API returns a code saying there is more data available.
The Python CLI should not treat this as an error, but should continue to print what the API returned.
---------
Signed-off-by: Oosman Saeed <oossaeed@amd.com>
* Made corrections to reading of pp_od_clk_voltage
* Added fall back to pp_dpm files if pp_od_clk_voltage doesn't exist
---------
Signed-off-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
* CMAKE - Remove example build from src/CMakeLists.txt
For some reason it was building examples every time even when not
necessary...
* CMAKE - Format
* Fix drm_example broken PRIu32
* CMAKE - Do NOT create lib64 when building examples
* CMAKE - Examples should only install C and CMake files
---------
Change-Id: I6274b72a085a41b5bd5ae698af798f60a8a092a0
Signed-off-by: Galantsev, Dmitrii <dmitrii.galantsev@amd.com>
* Adjusted help text
* Adjusted --afid to run only with --cper-file
* Fixed interface return error
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Change-Id: I2b96f4515c85f3b9dd84ba5c2d819729a997141b
* fix endian problem
* use hw_revision and flags_mask from cper section instead of hardcoded values
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
*Update aca-decode to #4cd539d that fixes some errors in parsing cper files for afid extraction
*Without this fix, we get garbage value for some cper input files relating GFX_poison_cpers
Signed-off-by: Oosman Saeed <oossaeed@amd.com>
* show afids on each line of printout
* clean up afids and cper code
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: Maisam Arif <Maisam.Arif@amd.com>
The xgmi read and write accumulated data from gpu metric index
is based on sysfs xgmi_port_num file. Mapped these two to display
read and write wrt src_gpu Vs dst_gpu.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
The xgmi command was showing pcie bit rate and bandwidth instead of xgmi. Corrected the API to get xgmi data from gpu metric.
Added python API for amdsmi_get_link_metrics. Modified the amdsmi_link_metrics struct.
Added check to confirm non zero partition got xgmi command.
---------
Signed-off-by: Bindhiya Kanangot Balakrishnan <Bindhiya.KanangotBalakrishnan@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
* [SWDEV-488303] Adjusted process vram_mem data source
* Standardized sscanf format strings
---------
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
Co-authored-by: gabrpham_amdeng <Gabriel.Pham@amd.com>
* Update to remove vram enum and instead use the string directly from the driver.
Signed-off-by: Narlo, Joseph <Joseph.Narlo@amd.com>
Signed-off-by: Maisam Arif <Maisam.Arif@amd.com>
feat: Report PLDM Bundle from SMC to IB
Code changes related to the following:
* APIs
* CLI
* Unit tests
Signed-off-by: Oliveira, Daniel <daniel.oliveira@amd.com>
Change-Id: I35ccf01eb612ca80e3ae6b72039085c18c989222
- Added more events to `amdsmi_evt_notification_type_t`
Change-Id: I6a256fe828e4bec3197c7fecbed374ab17c6f850
Signed-off-by: Adam Pryor <Adam.Pryor@amd.com>
Pryor, Adam
Oosman Saeed
Maisam Arif
Charis Poag
Bill Liu
josnarlo
Liu, Shuzhou (Bill)
Saeed, Oosman
gabrpham_amdeng
Kanangot Balakrishnan, Bindhiya
Galantsev, Dmitrii
Mewar, Deepak
Daniel Oliveira