rocm-systems/projects/rocprofiler-compute/CHANGELOG.md

Changelog for ROCm Compute Profiler

Full documentation for ROCm Compute Profiler is available at https://rocm.docs.amd.com/projects/rocprofiler-compute/en/latest/.

Unreleased

Added

• Native tool to perform counter collection using ROCprofiler-SDK public API. It is only supported for ROCm version 7.0.0 (and later).

  • Native tool is now the default for counter collection.
  • Native tool for counter collection will not be used under the following conditions:
    • Specific profiler is provided through the ROCPROF environment variable.
    • --no-native-tool option is provided, forcing usage of the default profiler.
    • When performing a dynamic attach to a process for profiling.

• Iteration multiplexing to collect counters in single application run

• Added --torch-trace option to enable mapping of PyTorch operators to collected counter values during profiling.

• Runtime compilation of Roofline benchmarking:

  • GPU kernels from rocm-amdgpu-bench repository are moved into the ROCm Compute Profiler and are compiled at runtime using local HIP and HIPRTC Python wrappers.
  • Roofline binaries compiled from rocm-amdgpu-bench repository have been removed from the project, as Roofline runtime compilation performs the same work as the Roofline binaries.
  • You can collect standalone Roofline empirical peaks without running the entire ROCm Compute Profiler's profile mode, through an entry point in benchmark.py. Running the benchmark.py Python file replaces calling standalone Roofline binary.

Changed

• Default output format for the underlying ROCprofiler-SDK tool has been changed from csv to rocpd.

  • If the ROCprofiler-SDK rocpd public library is not available, will fall back to csv format

• Option --rocprofiler-sdk-library-path has been changed to --rocprofiler-tool-library-path to better reflect the fact that we provide flexibility in choosing the path to ROCprofiler-SDK tool and not the library.

• Standalone roofline (--roof-only option) in profile mode now creates HTML file output instead of PDF file output for roofline charts

Resolved issues

• Implemented NOISE_CLAMP for L2 cache metrics to handle negative values from multi-pass profiling variance:

  • Negative values are clamped to 0 (eliminates physically impossible negative counts)
  • Warnings issued only when relative error exceeds 1% (anomaly detection)
  • Added FAQ documentation explaining the "Counter variance corrected" warning

• Fixed the meaning of --dispatch option in profile mode in argparser to convey the fact that it control which iterations of the kernel to profile and not which dispatch ids to profile.

• The meaning of --dispatch option in analyze is still the same which is which dispatch ids to analyze

• Fix the functioning of --dispatch option to act as 1-based index and ensure that correct kernel iterations are being profiled

• Corrected peak VALU Roofline profiling and analysis by removing FP8 VALU and BF16 VALU benchmarking.

• Fixed issue where detected max memory clock from amd-smi interface was using max gfx clock

  • Fixed issue where values detected from amd-smi were wrong when some GPU devices were hidden using ROCR or HIP environment variables

• Analysis mode bugfixes

  • Improved warnings when metrics could not be calculated due to missing counter data
  • Fix the check to prevent showing table where a column is full of N/A
  • Improve detection of empty values when metric evalulation fails due to counter data missing

• Fix issue where counter collection data was empty when profiling workload which spawn multiple child processes

• Fix issue where dispatch filtering in a range (e.g. >2) was not working

• Fix redundant warnings for compute/memory partition not found for < MI 300 series GPUs by skipping partition checks

• Fixed formula for metrics related to reads from L2 cache to HBM for MI350

Removed

• Removed "VL1 Lat" metric for AMD Instinct MI300 series GPUs, due to MI300 series not supporting TCP_TCP_LATENCY_sum counter.

Optimized

• Improved the responsiveness of menu and dropdown buttons in TUI analyze mode for a smoother user experience.

ROCm Compute Profiler 3.4.0 for ROCm 7.2.0

Added

• --list-blocks <arch> option to general options. It lists the available IP blocks on the specified arch (similar to --list-metrics), however cannot be used with --block.

• config_delta/gfx950_diff.yaml to analysis config YAMLs to track the revision between the gfx9xx GPUs against the latest supported gfx950 GPUs.

• Analysis db features

  • Adds support for per kernel metrics analysis.
  • Adds support for dispatch timeline analysis.
  • Shows duration as median in addition to mean in kernel view.

• Implement AMDGPU driver info and GPU VRAM attributes in system info. section of analysis report.

• Added CU Utilization metric to display the percentage of CUs utilized during kernel execution.

Changed

• -b/--block accepts block alias(es). See block aliases using command-line option --list-blocks <arch>.

• Analysis configs YAMLs are now managed with the new config management workflow in tools/config_management/.

• amdsmi python API is used instead of amd-smi CLI to query GPU specifications.

• Empty cells replaced with N/A for unavailable metrics in analysis.

Deprecated

• Active CUs metric has been deprecated and replaced by CU Utilization.

Removed

• Removed database mode from ROCm Compute Profiler in favor of other visualization methods, rather than Grafana and MongoDB integration, such as the upcoming Analysis DB-based Visualizer.
  • Plotly server based standalone GUI
  • Commandline based Textual User Interface

Optimized

Resolved issues

• Fixed sL1D metric values showing up as N/A in memory chart diagram

Known issues

Negative Values in Analyze Mode

Negative counter values occur due to timing mismatches in asynchronous hardware performance counters during multi-pass profiling, which is required due to hardware limitations (e.g., perfmon_config constraints).

An initial fix was implemented to clamp all negative values to zero using MAX(difference, 0), eliminating invalid results but potentially masking significant anomalies.

Negative values, when clamped, typically align with expected results and do not interfere with the overall accuracy or general average output in hardware counter profiling. This is because the variance caused by timing mismatches is typically minimal and does not significantly impact the profiling data.

A proposed long-term solution uses threshold-based clamping, distinguishing between minor noise and significant deviations, with warnings for larger issues.

Upcoming changes

ROCm Compute Profiler 3.3.1 for ROCm 7.1.1

Added

• Add support for PC sampling of multi-kernel applications.
  • PC Sampling output instructions are displayed with the name of the kernel that individual instruction belongs to.
  • Single kernel selection is supported so that the PC samples of selected kernel can be displayed.

Changed

• Roofline analysis now runs on GPU 0 by default instead of all GPUs.

Optimized

• Improved roofline benchmarking by updating the flops_benchmark calculation.

• Improved standalone roofline plots in profile mode (PDF output) and analyze mode (CLI and GUI visual plots):

  • Fixed the peak MFMA/VALU lines being cut off.
  • Cleaned up the overlapping roofline numeric values by moving them into the side legend.
  • Added AI points chart with respective values, cache level, and compute/memory bound status.
  • Added full kernel names to symbol chart.

Resolved issues

• Resolved existing issues to improve stability.

ROCm Compute Profiler 3.3.0 for ROCm 7.1.0

Added

• Dynamic process attachment feature that allows coupling with a workload process, without controlling its start or end.

  • Use '--attach-pid' to specify the target process ID.
  • Use '--attach-duration-msec' to specify time duration.

• Add rocpd choice for --format-rocprof-output option in profile mode

• Add --retain-rocpd-output option in profile mode to save large raw rocpd databases in workload directory

• Show description of metrics during analysis

  • Use --include-cols Description to show the Description column, which is excluded by default from the ROCm Compute Profiler CLI output.

• --set filtering option in profile mode to enable single-pass counter collection for predefined subsets of metrics.

• --list-sets filtering option in profile mode to list the sets available for single pass counter collection

• Add missing counters based on register specification which enables missing metrics

  • Enable SQC_DCACHE_INFLIGHT_LEVEL counter and associated metrics
  • Enable TCP_TCP_LATENCY counter and associated counter for all GPUs except MI300

• Added interactive metric descriptions in TUI analyze mode

  • users can now left click on any metric cell to view detailed descriptions in the dedicated METRIC DESCRIPTION tab

• Add support for analysis report output as a sqlite database using --output-format db analysis mode option

• Compute Throughput panel to TUI's High Level Analysis category with the following metrics:

  • VALU FLOPs
  • VALU IOPs
  • MFMA FLOPs (F8)
  • MFMA FLOPs (BF16)
  • MFMA FLOPs (F16)
  • MFMA FLOPs (F32)
  • MFMA FLOPs (F64)
  • MFMA FLOPs (F6F4) (in gfx950)
  • MFMA IOPs (Int8)
  • SALU Utilization
  • VALU Utilization
  • MFMA Utilization
  • VMEM Utilization
  • Branch Utilization
  • IPC

• Memory Throughput panel to TUI's High Level Analysis category with the following metrics:

  • vL1D Cache BW
  • vL1D Cache Utilization
  • Theoretical LDS Bandwidth
  • LDS Utilization
  • L2 Cache BW
  • L2 Cache Utilization
  • L2-Fabric Read BW
  • L2-Fabric Write BW
  • sL1D Cache BW
  • L1I BW
  • Address Processing Unit Busy
  • Data-Return Busy
  • L1I-L2 Bandwidth
  • sL1D-L2 BW

• Roofline support for Debian 12 and Azure Linux 3.0.

Changed

• On memory chart, long string of numbers are displayed as scientific notation. It also solves the issue of overflow of displaying long number

• Add notice for change in default output format to rocpd in a future release

  • This is displayed when --format-rocprof-output rocpd is not used in profile mode

• When --format-rocprof-output rocpd is used, only pmc_perf.csv will be written to workload directory instead of mulitple csv files.

• Improve analysis block based filtering to accept metric id level filtering

  • This can be used to collect individual metrics from various sections of analysis config

• CLI analysis mode baseline comparison will now only compare common metrics across workloads and will not show Metric ID

  • Remove metrics from analysis configuration files which are explicitly marked as empty or None

• Changed the basic (default) view of TUI from aggregated analysis data to individual kernel analysis data.

• Update Unit of the following Bandwidth related metrics to Gbps instead of Bytes per Normalization Unit

  • Theoretical Bandwidth (section 1202)
  • L1I-L2 Bandwidth (section 1303)
  • sL1D-L2 BW (section 1403)
  • Cache BW (section 1603)
  • L1-L2 BW (section 1603)
  • Read BW (section 1702)
  • Write and Atomic BW (section 1702)
  • Bandwidth (section 1703)
  • Atomic/Read/Write Bandwidth (section 1703)
  • Atomic/Read/Write Bandwidth - (HBM/PCIe/Infinity Fabric) (section 1706)

• Add Utilization to metric name for the following Bandwidth related metrics whose Unit is Percent

  • Theoretical Bandwidth Utilization (section 1201)
  • L1I-L2 Bandwidth Utilization (section 1301)
  • Bandwidth Utilization (section 1301)
  • Bandwidth Utilization (section 1401)
  • sL1D-L2 BW Utilization (section 1401)
  • Bandwidth Utilization (section 1601)

• Update System Speed-of-Light panel to GPU Speed-of-Light in TUI with the following metrics:

  • Theoretical LDS Bandwidth
  • vL1D Cache BW
  • L2 Cache BW
  • L2-Fabric Read BW
  • L2-Fabric Write BW
  • Kernel Time
  • Kernel Time (Cycles)
  • SIMD Utilization
  • Clock Rate

• Analysis output:

  • Replace -o / --output analyze mode option with --output-format and --output-name
    • Add --output-format analysis mode option to select the output format of the analysis report.
    • Add --output-name analysis mode option to override the default file/folder name.
  • Replace --save-dfs analyze mode option with --output-format csv

• Command-line options:

  • --list-metrics and --config-dir options moved to general command-line options.
  • • --list-metrics option cannot be used without argument (GPU architecture).
  • --list-metrics option do not show number of L2 channels.
  • --list-available-metrics profile mode option to display the metrics available for profiling in current GPU.
  • --list-available-metrics analyze mode option to display the metrics available for analysis.
  • --block option cannot be used with --list-metrics and --list-available-metricsoptions.

• Default rocprof interface changed from rocprofv3 to rocprofiler-sdk

  • Use ROCPROF=rocprofv3 to use rocprofv3 interface

• Roofline analysis now runs on GPU 0 by default instead of all GPUs.

Removed

• Usage of rocm-smi in favor of amd-smi.
• Hardware IP block-based filtering has been removed in favor of analysis report block-based filtering.
• Removed aggregated analysis view from TUI analyze mode.

Optimized

• Improved --time-unit option in analyze mode to apply time unit conversion across all analysis sections, not just kernel top stats.
• Improved logic to obtain rocprof supported counters which prevents unnecessary warnings.
• Improved post-analysis runtime performance by caching and multi-processing.

Resolved issues

• Fixed an issue of not detecting the memory clock when using amd-smi.
• Fixed standalone GUI crashing.
• Fixed L2 read/write/atomic bandwidths on AMD Instinct MI350 series accelerators.
• Update metric names for better alignment between analysis configuration and documentation
• Fixed an issue where accumulation counters could not be collected on AMD Instinct MI100.
• Fixed an issue of kernel filtering not working in the roofline chart

Known issues

• MI300A/X L2-Fabric 64B read counter may display negative values - The rocprof-compute metric 17.6.1 (Read 64B) can report negative values due to incorrect calculation when TCC_BUBBLE_sum + TCC_EA0_RDREQ_32B_sum exceeds TCC_EA0_RDREQ_sum.

  • A workaround has been implemented using max(0, calculated_value) to prevent negative display values while the root cause is under investigation.

• The profile mode crashes when --format-rocprof-output json is selected.

  • As a workaround, this option should either not be provided or should be set to csv instead of json. This issue does not affect the profiling results since both csv and json output formats lead to the same profiling data.

Upcoming changes

ROCm Compute Profiler 3.2.3 for ROCm 7.0.0

Added

CDNA4 (AMD Instinct MI350/MI355) support

• Support for AMD Instinct MI350 series GPUs with the addition of the following counters:

  • VALU co-issue (Two VALUs are issued instructions) efficiency
  • Stream Processor Instruction (SPI) Wave Occupancy
  • Scheduler-Pipe Wave Utilization
  • Scheduler FIFO Full Rate
  • CPC ADC Utilization
  • F6F4 data type metrics
  • Update formula for total FLOPs while taking into account F6F4 ops
  • LDS STORE, LDS LOAD, LDS ATOMIC instruction count metrics
  • LDS STORE, LDS LOAD, LDS ATOMIC bandwidth metrics
  • LDS FIFO full rate
  • Sequencer -> TA ADDR Stall rates
  • Sequencer -> TA CMD Stall rates
  • Sequencer -> TA DATA Stall rates
  • L1 latencies
  • L2 latencies
  • L2 to EA stalls
  • L2 to EA stalls per channel

• Roofline support for AMD Instinct MI350 series architecture.

Textual User Interface (TUI) (beta version)

• Text User Interface (TUI) support for analyze mode
  • A command line based user interface to support interactive single-run analysis
  • To launch, use --tui option in analyze mode. For example, rocprof-compute analyze --tui.

PC Sampling (beta version)

• Stochastic (hardware-based) PC sampling has been enabled for AMD Instinct MI300X series and later accelerators.

• Host-trap PC Sampling has been enabled for AMD Instinct MI200 series and later accelerators.

• Support for sorting of PC sampling by type: offset or count.

• PC Sampling Support on CLI and TUI analysis.

Roofline

• Support for Roofline plot on CLI (single run) analysis.

• FP4 and FP6 data types have been added for roofline profiling on AMD Instinct MI350 series.

rocprofv3 support

• rocprofv3 is supported as the default backend for profiling.
• Support to obtain performance information for all channels for TCC counters.
• Support for profiling on AMD Instinct MI 100 using rocprofv3.
• Deprecation warning for rocprofv3 interface in favor of the ROCprofiler-SDK interface, which directly accesses rocprofv3 C++ tool.

Others

• Docker files to package the application and dependencies into a single portable and executable standalone binary file.

• Analysis report based filtering

  • -b option in profile mode now also accepts metric id(s) for analysis report based filtering.
  • -b option in profile mode also accepts hardware IP block for filtering; however, this filter support will be deprecated soon.
  • --list-metrics option added in profile mode to list possible metric id(s), similar to analyze mode.

• Support MEM chart on CLI (single run)

• --specs-correction option to provide missing system specifications for analysis.

Changed

• Changed the default rocprof version to rocprofv3. This is used when environment variable ROCPROF is not set.
• Changed normal_unit default to per_kernel.
• Decreased profiling time by not collecting unused counters in post-analysis.
• Updated Dash to >=3.0.0 (for web UI).
• Changed the condition when Roofline PDFs are generated during general profiling and --roof-only profiling (skip only when --no-roof option is present).
• Updated Roofline binaries:
  • Rebuild using latest ROCm stack
  • Minimum OS distribution support minimum for roofline feature is now Ubuntu 22.04, RHEL 8, and SLES15 SP6.

Removed

• Roofline support for Ubuntu 20.04 and SLES below 15.6
• Removed support for AMD Instinct MI50 and MI60.

Optimized

• ROCm Compute Profiler CLI has been improved to better display the GPU architecture analytics

Resolved issues

• Fixed kernel name and kernel dispatch filtering when using rocprofv3.
• Fixed an issue of TCC channel counters collection in rocprofv3.
• Fixed peak FLOPS of F8, I8, F16, and BF16 on AMD Instinct MI300.
• Fixed not detecting memory clock issue when using amd-smi
• Fixed standalone GUI crashing
• Fixed L2 read/write/atomic bandwidths on AMD Instinct MI350 series.

Known issues

• On AMD Instinct MI100, accumulation counters are not collected, resulting in the following metrics failing to show up in the analysis: Instruction Fetch Latency, Wavefront Occupancy, LDS Latency

  • As a workaround, use the environment variable ROCPROF=rocprof, to use rocprof v1 for profiling on AMD Instinct MI100.

• GPU id filtering is not supported when using rocprofv3.

• Analysis of previously collected workload data will not work due to sysinfo.csv schema change.

  • As a workaround, re-run the profiling operation for the workload and interrupt the process after 10 seconds. Followed by copying the sysinfo.csv file from the new data folder to the old one. This assumes your system specification hasn't changed since the creation of the previous workload data.

• Analysis of new workloads might require providing shader/memory clock speed using --specs-correction operation if amd-smi or rocminfo does not provide clock speeds.

• Memory chart on ROCm Compute Profiler CLI might look corrupted if the CLI width is too narrow.

• Roofline feature is currently not functional on Azure Linux 3.0 and Debian 12.

Upcoming changes

• rocprof v1/v2/v3 interfaces will be removed in favor of the ROCprofiler-SDK interface, which directly accesses rocprofv3 C++ tool. Using rocprof v1/v2/v3 interfaces will trigger a deprecation warning.
  • To use ROCprofiler-SDK interface, set environment variable ROCPROF=rocprofiler-sdk and optionally provide profile mode option --rocprofiler-sdk-library-path /path/to/librocprofiler-sdk.so. Add --rocprofiler-sdk-library-path runtime option to choose the path to ROCprofiler-SDK library to be used.
• Hardware IP block based filtering using -b option in profile mode will be removed in favor of analysis report block based filtering using -b option in profile mode.
• MongoDB database support will be removed, and a deprecation warning has been added to the application interface.
• Usage of rocm-smi is deprecated in favor of amd-smi, and a deprecation warning has been added to the application interface.

ROCm Compute Profiler 3.1.1 for ROCm 6.4.2

Added

• 8-bit floating point (FP8) metrics support for AMD Instinct MI300 GPUs.
• Additional data types for roofline: FP8, FP16, BF16, FP32, FP64, I8, I32, I64 (dependent on the GPU architecture).
• Data type selection option --roofline-data-type / -R for roofline profiling. The default data type is FP32.

Changed

• Change dependency from rocm-smi to amd-smi.

Resolved issues

• Fixed a crash related to Agent ID caused by the new format of the rocprofv3 output CSV file.

ROCm Compute Profiler 3.1.0 for ROCm 6.4.0

Added

• Roofline support for Ubuntu 24.04
• Experimental support rocprofv3 (not enabled as default)

Resolved issues

• Fixed PoP of VALU Active Threads
• Workaround broken mclk for old version of rocm-smi

ROCm Compute Profiler 3.0.0 for ROCm 6.3.0

Changed

• Renamed Omniperf to ROCm Compute Profiler (#475)

Omniperf 2.0.1 for ROCm 6.2.1

Changed

• enable rocprofv1 for MI300 hardware (#391)
• refactoring and updating documemtation (#362, #394, #398, #414, #420)
• branch renaming and workflow updates (#389, #404, #409)
• bug fix for analysis output
• add dependency checks on application launch (#393)
• patch for profiling multi-process/multi-GPU applications (#376, #396)
• packaging updates (#386)
• rename CHANGES to CHANGELOG.md (#410)
• rollback Grafana version in Dockerfile for Angular plugin compatibility (#416)
• enable CI triggers for Azure CI (#426)
• add GPU model distinction for MI300 systems (#423)
• new MAINTAINERS.md guide for omniperf publishing procedures (#402)

Optimized

• reduced running time of Omniperf when profiling (#384)
• console logging improvements

Omniperf 2.0.1 for ROCm 6.2.0

Added

• new option to force hardware target via OMNIPERF_ARCH_OVERRIDE global (#370)
• CI/CD support for MI300 hardware (#373)
• support for MI308X hardware (#375)

Optimized

• cmake build improvements (#374)

Omniperf 2.0.0 (17 May 2024)

• improved logging than spans all modes (#177) (#317) (#335) (#341)
• overhauled CI/CD that spans all modes (#179)
• extensible SoC classes to better support adding new hardware configs (#180)
• --kernel-verbose no longer overwrites kernel names (#193)
• general cleanup and improved organization of source code (#200) (#210)
• separate requirement files for docs and testing dependencies (#205) (#262) (#358)
• add support for MI300 hardware (#231)
• upgrade Grafana assets and build script to latest release (#235)
• update minimum ROCm and Python requirements (#277)
• sort rocprofiler input files prior to profiling (#304)
• new --quiet option will suppress verbose output and show a progress bar (#308)
• roofline support for Ubuntu 22.04 (#319)

Omniperf 1.1.0-PR1 (13 Oct 2023)

• standardize headers to use 'avg' instead of 'mean'
• add color code thresholds to standalone gui to match grafana
• modify kernel name shortener to use cpp_filt (#168)
• enable stochastic kernel dispatch selection (#183)
• patch grafana plugin module to address a known issue in the latest version (#186)
• enhanced communication between analyze mode kernel flags (#187)

Omniperf 1.0.10 (22 Aug 2023)

• critical patch for detection of llvm in rocm installs on SLURM systems

Omniperf 1.0.9 (17 Aug 2023)

• add units to L2 per-channel panel (#133)
• new quickstart guide for Grafana setup in docs (#135)
• more detail on kernel and dispatch filtering in docs (#136, #137)
• patch manual join utility for ROCm >5.2.x (#139)
• add % of peak values to low level speed-of-light panels (#140)
• patch critical bug in Grafana by removing a deprecated plugin (#141)
• enhancements to KernelName demangeler (#142)
• general metric updates and enhancements (#144, #155, #159)
• add min/max/avg breakdown to instruction mix panel (#154)

Omniperf 1.0.8 (30 May 2023)

• add --kernel-names option to toggle kernelName overlay in standalone roofline plot (#93)

• remove unused python modules (#96)

• fix empirical roofline calculation for single dispatch workloads (#97)

• match color of arithmetic intensity points to corresponding bw lines

• ux improvements in standalone GUI (#101)

• enhanced readability for filtering dropdowns in standalone GUI (#102)

• new logfile to capture rocprofiler output (#106)

• roofline support for sles15 sp4 and future service packs (#109)

• adding dockerfiles for all supported Linux distros

• new examples for --roof-only and --kernel options added to documentation

• enable cli analysis in Windows (#110)

• optional random port number in standalone GUI (#111)

• limit length of visible kernelName in --kernel-names option (#115)

• adjust metric definitions (#117, #130)

• manually merge rocprof runs, overriding default rocprofiler implementation (#125)

• fixed compatibility issues with Python 3.11 (#131)

Omniperf 1.0.8-PR2 (17 Apr 2023)

• ux improvements in standalone GUI (#101)
• enhanced readability for filtering dropdowns in standalone GUI (#102)
• new logfile to capture rocprofiler output (#106)
• roofline support for sles15 sp4 and future service packs (#109)
• adding dockerfiles for all supported Linux distros
• new examples for --roof-only and --kernel options added to documentation

Omniperf 1.0.8-PR1 (13 Mar 2023)

• add --kernel-names option to toggle kernelName overlay in standalone roofline plot (#93)
• remove unused python modules (#96)
• fix empirical roofline calculation for single dispatch workloads (#97)
• match color of arithmetic intensity points to corresponding bw lines

Omniperf 1.0.7 (21 Feb 2023)

• update documentation (#52, #64)
• improved detection of invalid command line arguments (#58, #76)
• enhancements to standalone roofline (#61)
• enable Omniperf on systems with X-server (#62)
• raise minimum version requirement for rocm (#64)
• enable baseline comparison in CLI analysis (#65)
• add multi-normalization to new metrics (#68, #81)
• support alternative profilers (#70)
• add MI100 configs to override rocprofiler's incomplete default (#75)
• improve error message when no GPU(s) detected (#85)
• separate CI tests by Linux distro and add status badges

Omniperf 1.0.6 (21 Dec 2022)

• CI update: documentation now published via github action (#22)
• better error detection for incomplete ROCm installs (#56)

Omniperf 1.0.5 (13 Dec 2022)

• store application command-line parameters in profiling output (#27)
• enable additional normalizations in CLI mode (#30)
• add missing ubuntu 20.04 roofline binary to packaging (#34)
• update L1 bandwidth metric calculations (#36)
• add L1 <-> L2 bandwidth calculation (#37)
• documentation updates (#38, #41)
• enhanced subprocess logging to identify critical errors in rocprofiler (#50)
• maintain git sha in production installs from tarball (#53)

Omniperf 1.0.4 (11 Nov 2022)

• update python requirements.txt with minimum versions for numpy and pandas
• addition of progress bar indicator in web-based GUI (#8)
• reduced default content for web-based GUI to reduce load times (#9)
• minor packaging and CI updates
• variety of documentation updates
• added an optional argument to vcopy.cpp workload example to specify device id

Omniperf 1.0.3 (07 Nov 2022)

• initial Omniperf release