Memory from the suballocator may be exported via IPC. If this
happens then the allocating process should not reuse that memory
since it would still be connected to the remote process. IPC exported
memory must be released back to the driver.
Change-Id: I2ab0c814f63191f753fc3640cc4140ee144bf07f
The 1st level trap handler jumps to the 2nd level trap handler on
context save requests or regular traps if (mode.debug_en
&& !status.halt) is true.
If we return from the 2nd level trap handler without status.halt=1, then
we need to make sure mode.debug_en is cleared, or we will re-enter the
2nd level trap handler again and again when trapsts.savectx is set.
Change-Id: I4db6369de8c91a32842f488a4df5c9d94fa65aa9
In the case where SQ_WAVE_TRAPSTS_XNACK_ERROR_MASK is set, we also need
to set the TTMP11_EXCP_RAISED_BIT in ttmp11. If we don't, the debugger
may think that the wave is halted at launch (halted without events).
Change-Id: I8c19605bbfc145275728de4ad1979d3ba8bb478a
The ROCR trap handler should check for all end program instructions
and not halt on them. Mask off the imm16 before comparing the
instruction to the s_endpgm opcode.
Change-Id: I669ffc7f5b699d7daf0c8ec5761ed7bb193f07a7
New trap handler ABI: Record in ttmp11[8:7] the event that caused the
trap handler to be entered. We currently record 2 events, trap_raised
if an s_trap instruction was executed, or excp_raised if an exception
(MEM_VIOL or ILLEGAL_INST) was raised.
Change-Id: Ie278c8277437b3b67c2737dcd1a12fe6511df428
scratch_used_large_ was uninitialized leading to the observed hang.
DynamicScratchHandler would wait for a large scratch release despite no
large scratch having yet been allocated. Fixes .
The patch also removes a potential race between AddScratchNotifier and
ReleaseQueueScratch. The race condition does not exist today since both
scratch alloc and release run on the same thread. The changes will
prevent this potential race from manifesting if the async event handler
is ever updated to use multiple threads.
Also enhances scratch occupancy reduction reporting. Reporting now
prints the initial request size as well as the allocated size and the
effect on occupancy this has. Occupancy is computed in terms of the
requesting dispatch grid size so may be >100%.
Change-Id: I0fc5ee01467ff4c29bdd25d545177c97862c3bd9
Queues should transition to ref counting for all queues eventually.
That cleanup will be part of shared queue pooling support.
Change-Id: I217ff5d573156678b9559da6fb81baa8cd31c617
Debugger path is taken for (trap_id >= 3) and single step exceptions.
Other traps/exceptions behave as before.
Change-Id: I276c0eb69953709968353a57717ee017d22348a2
- Use new buffer resource descriptor layout
- Handle wave32 scratch allocation error from CP
- Make wavefront size a property of scratch allocation requests
- Repurpose wave64-specific amd_queue_t.scratch_workitem_byte_size field
- Clear index_stride field in V# on gfx10, calculated per-dispatch by CP
Change-Id: If2acdf6430772abd4d6a8c792fc8c11260764dda
sdma end ts must be 256 bit aligned in oss 3.0 and prior. Using
the ts pool requires copying into the signal and is a significant
performance penalty for small copies.
SharedSignal is 128 bytes due to alignment so can host the end ts.
Move sdma end ts into SharedSignal and remove ts pool and ts copy.
Change-Id: I7899bda36ebc9adcaad1d3a3d2b7a489857cc9e8
If M0[23] is set then the driver will interpret the interrupt as a
debug event, rather than a signal event.
Clear M0 before sending the interrupt. All paths here are terminal so
it's not necessary to save/restore M0.
Change-Id: Ibd85b8cc6f8556941f2308a2c3fa3c68702cd606
Report traps and fatal exceptions through a wavefront's
amd_queue_t.queue_inactive_signal. Previously, only traps were
reported and requireed the compiler to pass in the signal pointer
in s[0:1].
The signal is obtained through a mapping from doorbell index to
amd_queue_t*. The doorbell is fetched within a wavefront through
the gfx9+ S_SENDMSG(MSG_GET_DOORBELL) instruction.
Change-Id: I319b45f2e15dfcfe4db8f4065da1136e9539a42b
Assembler toolchains are moving from SP3 to LLVM. Replace trap handler
source code with LLVM equivalent.
Fix a trap issue with SQ_WAVE_IB_STS restore. Mostly harmless as all
traps are currently considered fatal to the wavefront.
Change-Id: Iacecd9dd31a1d96a083c8b8327f442f33c861f9f
Adds hsa_amd_register_deallocation_callback and hsa_amd_deregister_deallocation_callback
to notify when HSA memory has been released.
Change-Id: I1f33cee250ca890e5c2e7fddfa4479aa5874651d
Small times may be given to time conversion if GPU clocks are used to
accumulate elapsed time. Because HSA APIs deal in absolute time this
leads to large conversion offsets of order system uptime. Variation
in relative clock ratio estimation may be amplified in this case,
destroying elapsed time measurements.
This patch fixes the relative clock ratio used for times which predate
the call to hsa_init. This correlates errors in such times allowing
the elapsed time to be correctly computed.
The effective maximum system uptime before elapsed time conversion becomes
inaccurate is ~3.5 months. GPU event timestamps are good for process uptime
of ~3.5 months. These are limited by double's mantissa precision.
Change-Id: I48752ff354920439d91016d6f2b0c8ddfa60b445
At the moment it is not possible to build ROCr with Clang. This is
a spurious limitation. The present PR addresses it by guarding GCC
only flags and by fixing some additional warnings that Clang triggers;
one of said warnings did outline a rather interesting issue with math
being done on void*s. - AlexVlx
Void ptr arithmetic had already been fixed in amd-master branch.
Change-Id: I5ee97e20b5c40b10dd73facecabe75f02ba46462
Non-paged memory can be IPC-shared even when HSA_USERPTR_FOR_PAGED_MEM
is enabled.
Change-Id: I8b1fa6d7a4a9327c78a77b3679697fbf55397093
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Makes malloc memory accessible to GPUs so that the memory has the
capabilities of the pool it is locked to.
This admits fine grained locked memory and reserves API space for any future
special CPU pools.
Change-Id: If8c3dd8582a43f19d3d36b3763c1a688cc419ef0
Also rename blit_agent to region_gpu and add comments to clarify
its role in deprecated region API support rather than to do blits.
Change-Id: I80b1043db2e1c5d40a58fc801eef70a688ea9169
Debug agent requires handles to internal queues for single step debugging.
Added tools only API hsa_amd_runtime_queue_create_register for reporting.
hsa_amd_runtime_queue_create_register sets a callback which is invoked
when internal queues are created.
Change-Id: Ia5190ae724fadba686c15f25b2cd085350eeff0e
Apertures now overlap with the change to 48bit addressing which
precludes using aperture checks to discover buffer ownership.
Switches to ptrinfo to decide which device a buffer owned by.
This corrects faults in the legacy hsa_memory_copy api.
Change-Id: I5c7ce0216e1cdc96f836fc6fec9c3defdf4b9d90
Remove fence pool and use two signals. Two signals allows overlapped
submission and copy while reducing thread busy polling.
Change-Id: Idb5f8e4c7f482a596ffce9e7799191fdd785a216
Fix pitch overflow due to small element detection.
Add wide pitch 2D copy handling.
Cleanup code duplication.
Change-Id: I93b1584aba8e5964957eb7ab3544df806ca3e2f9
llvm.debugtrap and other trap IDs are reserved and should not place
the queue into an error state.
Change-Id: I98193a35ac7da94c4a42ee75d87754ee552ebea0
Sean Keely
Laurent Morichetti
Ramesh Errabolu
Qingchuan Shi
Jay Cornwall
Chris Freehill
Christian Sigg
Felix Kuehling
Konstantin Zhuravlyov