Alloc vram by kfd, then map by GEM api to GPU VM and map to CPU VM.
Signed-off-by: Xiaogang Chen<Xiaogang.Chen@amd.com>
Change-Id: Ib5b2f35662cd5473f622f6ffc9b62925fe57ae42
[ROCm/ROCR-Runtime commit: 108c0e5f92]
If Dev0 and Dev1 are not the same gfx, we should temporarily
set the target ASIC for compiling Shader code.
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Shikai Guo <shikai.guo@amd.com>
Change-Id: I5836beb16ade519f5a148d3d2b9c2875554f0c35
[ROCm/ROCR-Runtime commit: 5d6f900353]
These tests should also pass on Aqua Vanjaram, so enable them
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Ibbb9cd43d653c63b08c39efd1d7326cfac1f8411
[ROCm/ROCR-Runtime commit: eed5518e4c]
Aqua Vanjaram is intended to have fine-grained coherency
from anywhere to anywhere else using read-acquire and
write-release primitives.
Add a test that writes to memory covered by five
different cache lines, then write-releases, while
another thread read-acquires, then reads those
five locations in memory.
There are nine variations of the test to cover
CPU-GPU, same-GPU and across-GPU, vector instructions and
scalar instructions, and data local to the
acquirer or receiver.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I20d2db5c53bd280e971479aad7e61df6ed5d3623
[ROCm/ROCR-Runtime commit: 30b1f23f7a]
KFDMemoryTest.DeviceHdpFlush requires device node 0 is large bar to
check VRAM content from CPU, run the test only if device 0 is large
bar GPU.
Change-Id: I874b153219550c50b724625e971e3ed3a84dc652
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 598e3e8d86]
Nodes with XGMI have no HDP, so DriverHDPFlush should skip.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: If5a87e660712e51d03e750d8e044786036b2e603
[ROCm/ROCR-Runtime commit: e32278a612]
Even with the restriction to only compile on gfx90a, this
shader still fails CompileShaders test.
There don't seem to be any systems that actually use it.
Leave it in the shader store, but remove it otherwise
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: I41bec6ba10363d42b163ac101c3a92edaad6d6df
[ROCm/ROCR-Runtime commit: 16c6530330]
Register and map userptrs through Shared Virtual Memory(SVM) API at
the Kernel level when available. Using this approach, performance
will be improve as register/unregister memory will not trigger any
system call to KFD driver.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I3726b4b5e1c6a52a83786fbe0af6322eb29ae7c9
[ROCm/ROCR-Runtime commit: 63c8cf115a]
The MemoryAllocAll test in kfdtests exercises the new KFD memory
availability API by trying to allocate a single buffer object that
exactly fills all of vram. Desired object size is determined using the
memory availility KFD ioctl via libhsakmt, then an object is allocated
slightly larger than that size. If the allocation attempt fails then
the test tries to allocate a slightly smaller object, and continues
trying with smaller sizes until the allocation succeeds. The test
succeeds if the successfully allocated object is within some specified
tolerance of the available memory reported.
There are a number of known issues that can cause the successfully
allocated object to be significantly smaller than reported availability.
Until these issues are addressed, we should not fail the test, but just
log the actual divergence between the size of the object we thought we
could allocate, and what was actually possible.
Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Change-Id: I165a30865ffbb2353286dcc896ad8e24af124615
[ROCm/ROCR-Runtime commit: d3bb1ca4af]
If the KFD IOCTL version doesn't support available_memory, don't run the
test. Just skip the test
Change-Id: Iebf526d4563ab9f3c054bbfb38c214a1b893fcb5
[ROCm/ROCR-Runtime commit: 64aa9009e1]
This reverts commit ea19fbb646.
There are some openMP issues that were introduced after SVM userptr
feature was added.
Signed-off-by: Alex Sierra <Alex.Sierra@amd.com>
Change-Id: I7ef87c5232a3bcbe594c743fa4b4958601845ba5
[ROCm/ROCR-Runtime commit: f2bda56d04]
Detect under-reporting of available memory by initially attempting to
allocate substantially more than reported available memory, and ensure
that the allocation fails. Continue shrinking the attempted allocation
until it succeeds, then fail the test if the successful allocation is
either too much more than or too much less than reported available.
Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Change-Id: Ib418f0aa26e8db80590a6c5f2578da56a4b60f2b
[ROCm/ROCR-Runtime commit: e71eb13784]
Modifier scc is disabled from gfx90a's asm, so remove the
shader for gfx90a A+A and keep it for newer asics with scc
support.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Change-Id: Iec3c7ccd5156a855adb2b02feb3db0761876aa2f
[ROCm/ROCR-Runtime commit: 8e8aa024fd]
Register and map userptrs through Shared Virtual Memory(SVM) API at
the Kernel level when available. Using this approach, performance
will be improve as register/unregister memory will not trigger any
system call to KFD driver.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: I20723cbeb340bf48b95e1115f0102c031397bc14
[ROCm/ROCR-Runtime commit: 178a619b80]
: The kernel driver will do align VRAM allocations to 2MB, instead of 4KB.
Change-Id: Iea9d8c0f02999b9ea5fd931da82240a33f7bcc69
[ROCm/ROCR-Runtime commit: 17fb40f1f6]
In DeviceHdpFlush, isaBuffer was accidentally used instead of isaBuffer0
during LLVM re-work--revert.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: I98d2322e772f821a39505bb336ceb4e6cd8722ef
[ROCm/ROCR-Runtime commit: ffa6c95858]
In the LLVM rework, a line was accidentally changed from
isaBuffer1 to isaBuffer, causing VramCacheCoherenceWithRemoteGPU
to fail. Change it back.
Signed-off-by: David Francis <David.Francis@amd.com>
Change-Id: Ie1f3465b5c46556f18682d1b3d1f086bb790c648
[ROCm/ROCR-Runtime commit: 4b041a8ad9]
- Reformat shaders for legibility
- Move assembly processes to from IsaGen (CompileShader) to Assembler
(RunAssembleBuf)
- LLVM syntax change on ScratchCopyDwordIsa_gfx10:
hwreg(HW_REG_SHADER_FLAT_SCRATCH_LO/HI) -> hwreg(HW_REG_FLAT_SCR_LO/HI)
- Fix bug in CopyOnSignalIsa_gfx10 and PollMemoryIsa_gfx10 whereby
flat_store_dword used vector reg format v[n,n]. Changed to v[n:n]
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Id182cfb8aeb7372366c59affb5cbdd145909ee96
[ROCm/ROCR-Runtime commit: 039bce94a6]
It's not possible to allocate the 3/4 vram size with granularityMB
being 128 when vram size < 512MB and decrease granularityMB to 16 has
no significant impact on ROCt test on other system. So let's decrease
granularityMB on small vram system for handling LargestVramBufferTest().
Change-Id: Iea7c29abfd382a20761b653730fd09a220ad2fd0
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
[ROCm/ROCR-Runtime commit: 6c103877dd]
Some VRAM access tests in MMBandWidth can be very slow on systems with
complicated PCIe topology. Skip tests that take a long time to avoid
excessively long running tests with little benefit.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: I2950237347fc2f764f6aa3292ab819051472bf37
[ROCm/ROCR-Runtime commit: 3ecd54f098]
Total VRAM size on APU is 512M usually,
Framebuffer also is allocated from VRAM.
There is no enough memory for this case.
/home/ruiliji2/p5/libhsakmt/tests/kfdtest/src/KFDMemoryTest.cpp:1285: Failure
Value of: (hsaKmtMapMemoryToGPUNodes(bufs[i], bufSize, &altVa, mapFlags, 1, &defaultGPUNode))
[ FAILED ] KFDMemoryTest.MMBench (1034 ms)
Change-Id: Ib4201291122d85f6512a85859aea9a4713fb4f5c
(cherry picked from commit a9f924484e7022a2d53ee02811b080f0833eba55)
[ROCm/ROCR-Runtime commit: 0340c68031]
skip HDP flush test when remap feature is not supported.
Backgroud:
the HDP register remap is skipped in sriov mode,
it will cause mmio base is nullPtr.
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: Ib9aea1900931e30571656397a485ee4db051ec0a
[ROCm/ROCR-Runtime commit: 033b52c4e4]
Test if query userptr pointer info return correct alloc flags,
CoarseGrain by default.
Test if query hsaKmtAllocMemory pointer info return correct alloc
CoarseGrain flags.
Change-Id: If3a1175645717e5d7c475d6ff35b02d6876a1f7c
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: c3c1618db7]
Test Thunk multiple threads register and deregister same userptr race
condition, to emulate application register same userptr to multiple
GPUs using multiple threads.
Use thread barrier to sync the threads, to start register userptr at
same time.
Change-Id: I6723dc39f75908026fa14a490e39e1fe49a13a1b
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 92076f6f1b]
If the signal arrives too late, it interrupts waitpid. Handle this
situation gracefully.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Change-Id: If4925c352c81ba7fef8a940460b91f5e720b451e
[ROCm/ROCR-Runtime commit: 25288e07dc]
It is to address gfx90a HW memory model changes.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Change-Id: Ie5c5c5ee5ddfb75c0b4f625baf59ce37b4cc7c31
[ROCm/ROCR-Runtime commit: a6703395f6]
Three kfd subtests are added to verify new XGMI connection with
cache coherence HW link on A+A.
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Change-Id: I6960ec91cbfb696c4e6acb3b79fd83107003acdd
[ROCm/ROCR-Runtime commit: 9aa521d1ff]
In A+A all system memory is mapped as NC. So add a new function
gfx9_PollNCMemory which will support NC memory.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Change-Id: I097b95fb156f73d6f480cd4fd262cc6fa5933f69
[ROCm/ROCR-Runtime commit: 085005f07b]
Refer to commit "Mark buffers accessed by CP as UC"
A+A buffers are mapped as NC. CP (PM4Writes) need ReleaseMem function to
ensure the write go through to the memory
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Change-Id: I4ee55a6e40fba078f5950d95c8fee7ee076260bf
[ROCm/ROCR-Runtime commit: 57f46b53ec]
Add updated SP3 static library with support for gfx90a and
also add initial corresponding changes in kfdtest.
Change-Id: I71bc6404ace7f9bf0dd74e712287136aa2b8a03d
[ROCm/ROCR-Runtime commit: c861873dae]
check GPU peer accessible with p2p_links in system
Signed-off-by: Gang Ba <gaba@amd.com>
Change-Id: I026f16564303b687811d6648f0b7f84be6819979
[ROCm/ROCR-Runtime commit: 8e94dde685]
On gfx1012, allocating 1/4 of the system memory on a 32G RAM machine
could fail, resulting in this test to fail. Limit the maximum buffer
to allocate to be smaller than 3G to accommodate this situation.
Change-Id: I38b0a0f7da1f0b9ca851e04d2d0a51767858c801
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
[ROCm/ROCR-Runtime commit: 2b70d73f68]
The previous BigBufferStressTest has too much stuff and takes a long
time to run. By separating largest*BufferTest out into other
tests, we dramatically reduce the time to run BigBufferStressTest and
therefore make reproducing issues much easier.
Meanwhile, rename the test to BigSysBufferStressTest to express more
information.
Change-Id: I5911f113c0bd50627ee6d84bbb4f2972cbed8886
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
[ROCm/ROCR-Runtime commit: b6cefa7bda]
In order to accommodate the flaky queue submission under memory
shortage scenarios, BigBufferStressTest has become very much a hack,
undermining its purpose of testing the basic memory related operations.
Therefore, remove the queue submission part. The EvictTest should serve
the purpose of testing the memory and queue submission functionalities
when memory eviction happens.
Change-Id: I3c3603a0e834267eccb72f46efeabe1e053c8fc5
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
[ROCm/ROCR-Runtime commit: cbe21fa261]
If NUMA system no available memory on node 0, mbind will fail on node
0, so set flag NoNUMABind=1 to bypass mbind for all test cases which use
node 0 and allocate system memory.
Change-Id: I7962938ad2bed5a293ca5e6a8500c7f7e15ff453
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 2fa7d23a82]
When large bar is not available, we can use
xgmi to do p2p tests.
Change-Id: Ib7b59fb8a4d41f605739a0428973f6b2f1a3450f
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
[ROCm/ROCR-Runtime commit: 0174377351]
The memory need to be mapped for both local and remote GPU access
Change-Id: I4aeaffc0851b6107fc91e9eaa6150764b06f5ca9
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
[ROCm/ROCR-Runtime commit: da789a2584]
Allocate system memory from node id 0 will fail on NUMA system which has
no memory on node 0. Change to use new flag NoNUMABind to allocate
system memory from NUMA nodes which have free memory.
Change-Id: I8ef9ca28fc2ab5dd31d07a2d3eaf1d5886e798a0
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
[ROCm/ROCR-Runtime commit: 69d8f2d734]
A number of tests are no longer broken on gfx802.
Change-Id: If70c77423f8f14de59490ab8ca156b0c4e7b5cf1
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
[ROCm/ROCR-Runtime commit: 8f91d6a222]
Xiaogang Chen
Shane Xiao
David Francis
Philip Yang
Alex Sierra
Daniel Phillips
Felix Kuehling
kent.russell@amd.com
Eric Huang
Ramesh Errabolu
Daniel Phillips
jie1zhan
Graham Sider
Prike Liang
Ruili Ji
Yang Wang
Harish Kasiviswanathan
Mukul Joshi
Yifan Zhang
Chengming Gui
Gang Ba
Yong Zhao
Oak Zeng