- Add the new fillBuffer kernel, which allows to launch a limited
number of workgroups for memory fill operation
- Switch fill memory to 16 bytes write by default
- Allow to limit the workgroups with DEBUG_CLR_LIMIT_BLIT_WG
Change-Id: Ibad1822f2d42b2fc71bcfc1917c31409c0623e8e
[ROCm/clr commit: f1dc81f427]
- Report kernel names for optimized graph path
- Refactor code so that we store profiling info in Accumulate command
Change-Id: Ib97735a0239aeb9fc3a50a4bb7126dd0bcadc8af
[ROCm/clr commit: b056686607]
- Do not use extra barrier to detect graph end. If its a kernel node we
can use a completion signal for the last packet. Saves roughly 6us for
Phantom testcase per graph launch.
Change-Id: I5e0c2479d9964fbeda86ed97533f6718f49a7f91
[ROCm/clr commit: c3bd229f4f]
- Track all captured commands under a new AccumulateCommand
- Add begin() and end() methods to capture commands
- Explicit TS object now passed to certain methods because
profilingBegin() and profilingEnd() now happen separately and thus can
run into threading issues
Change-Id: I171106bdcad72b057836cb2f3fc398db3533119f
[ROCm/clr commit: 40f41f4d0b]
- Refactor code and cleanup logic for callback saving for event records
Change-Id: I5c56aa8e9c968a5bca70fb07ad1796da318e9e89
[ROCm/clr commit: 1338ff37e8]
- Support graph with different types of nodes with single
branch when DEBUG_CLR_GRAPH_PACKET_CAPTURE flag is enabled
Change-Id: I149a8629769cd0d5849ffefb04f1352668a685b6
[ROCm/clr commit: 38d2c56784]
If we submit a systemScope Barrier, we should reset this flag as there
is no need for dispatch AQL again to flush caches/HDP
Change-Id: I55710feb4ba6650852e785b5cadfa64c6b9ce14e
[ROCm/clr commit: de2b06a7a7]
- Track last SDMA engine per queue, this results in better scheduling
- Reset last SDMA engine upon batch completion. That ensures we dont get
blocked if the same engine is used by another concurrent copy
Change-Id: Id53111980da7ee41d5c932fb44e4aab5b1e065a3
[ROCm/clr commit: bf8baeecb3]
- Acquire and Release scopes for AQL need to be balanced. These were
missing on the AMD_OPT_FLUSH=0 path.
Change-Id: Ibf4132eb96800f155d7b664359c790d68a353e60
[ROCm/clr commit: 42c9cd0320]
Use large signal pool if profiler is connected or profiling forced
enabled. This is needed to mitigate signal creation overhead when
profiling as signals are attached to every packet and deeper batch may
show overhead of signal allocation.
Change-Id: I8034b8a20b55328b87d593bf044f59672f9653e8
[ROCm/clr commit: 1ec0ba3537]
HIP_FORCE_DEV_KERNARG=1 will create a device allocation for kernel arg
segment. Flag is 0 by default.
Change-Id: Iaaf5a149f3be8596568878d5d272268baf067c60
[ROCm/clr commit: 5436d362b1]
- Introduce a state variable to indicate if HwProfiling is enabled to
eliminate a possible data race of vector<> signals_.
Change-Id: Id504cc76d7fa9f7e6455587dd232b60ccbbb735b
[ROCm/clr commit: afa28cdf44]
Heap initialization used device queue, but it shoudl be used for
cooperative launches only. Heap initialization must use the same queue
as the current dispatch.
Change-Id: I856621bf82bbdeb1c2d0fbc4970e90d09af805cb
[ROCm/clr commit: 67af16bdf3]
Scheduler in device queue requires relaunching itself. Make sure
scheduler uses exactly the same AQL packet as the host launch.
Change-Id: I4eb03c4c91bf2408a6d4607731f081a2e2c2c8ae
[ROCm/clr commit: b23c759746]
- Use correct header for vendor packet
- Pass one dependent signal when submitting a marker if there is one
Change-Id: I4efc70dd5204b559de26f899d0637f50421c8834
[ROCm/clr commit: 77ceb7e9ad]
The profiler can retrieve this correlation ID to attribute waves to
specific dispatch locations.
Change-Id: I700e8a91219d612f6a2028c0dda0c92753f3526a
[ROCm/clr commit: b043b4f5a2]
German Andryeyev
Saleel Kudchadker
Anusha GodavarthySurya
Ioannis Assiouras
kjayapra-amd
Jaydeep Patel
Sourabh Betigeri
Alex Voicu
Jatin Chaudhary
Laurent Morichetti