This reverts commit 96e25898c8.
Reason for revert: SWDEV-455075, SWDEV-461507 - This change forces to
use ROCr's copy path. Reintroducing hostBlit copy path for
host-to-host copies.
Change-Id: Ic3c45b49e481c9dcdaa7611f61071778790b7e6c
[ROCm/clr commit: a9f05e22db]
- Print kernelname for graph launches, its hard to correlate packets
otherwise
- Print correlation_id if any
Change-Id: Ib8db7a00e4e7c98f570e71029e61d86f5dccc2ed
[ROCm/clr commit: 72d23a02c5]
- Remove Last graph node optimization and instead submit a barrier NOP
packet always. This simplifies the code.
Change-Id: Ied443173ba47a08b6df148ac7e3ead712acda11c
[ROCm/clr commit: badf2b0880]
The Readback and Avoid HDP Flush memory ordering workaround is
used as a fallback solution only when HDP flush register is invalid
Change-Id: Ic284eba1f95ed22b0270d3abeb904fb902015b1a
[ROCm/clr commit: 6cb7b6ec6b]
- Add LOG_TS mask for printing signal times
- Read raw ticks from signals
Change-Id: Ibdd0bf06c790729f6c65083a4784c97a3c3219e0
[ROCm/clr commit: 948ca5a931]
The "optimized" version of memcpy is outdated and
was used in win32 only.
Change-Id: I7f2e0e9051e37cec95438266824b5b0025c324c6
[ROCm/clr commit: 7448113cfc]
Dispatching multiple packets with ring the doorbell once is not supported by the lower layers
Change-Id: I7665a2dcdd4ef9e47dadfe410180fed64c5a4ee0
[ROCm/clr commit: d7f352dbed]
- Create a vector to allow multiple TS to be stored in Command.
- This would mean we dont wait for entire batch in Accumulate command
to finish when we exhaust signals.
- Reduce the number of signals created at init to 64. This min value
may still need to be tuned but the KFD allows max of 4094 interrupt
signals per device.
- Store kernel names whenever they are available and not just when
profiling. If we dynamically enable profiling like for Torch, a crash
can happen if hipGraphInstantiate wasnt included in Torch profile scope
beacuse we previously entered kernel names only when profiler is
attached.
Change-Id: I34e7881a25bbc763f82fdeb3408a8ea58e1ec006
[ROCm/clr commit: c157bfb202]
- With https://gerrit-git.amd.com/c/lightning/ec/llvm-project/+/1002628 applied, at -O0 Kernel::dynamicParallelism() returns true but virtual queue isn't created
- This causes segfault inside VirtualGPU::submitKernelInternal() when getVQVirtualAddress() is called
Change-Id: Ia7af042adad2329e870c142caaac3e8fa886f8b8
[ROCm/clr commit: d1fff7cea2]
Under ROCr physical allocations don't have initial VA and require extra
flag in ROCclr. Add an option to have a mempool of physical allocations.
Change-Id: I4d062fe0dd8113d4eaf6e8b51749ed56d8701d1e
[ROCm/clr commit: f296159f62]
- Sometimes we want to mask out kernel names, use right level for kernel
logging
Change-Id: Ideae9647c57b86ae390ff2f4131f6d8c6df5c086
[ROCm/clr commit: f1adecd186]
- Print SWq for AQL packets, this helps correlating a stream to the HWq
mapped
Change-Id: I610430c0872a1abc6636027c00163ec46983cd65
[ROCm/clr commit: 984c86f407]
- Enable Device kernel args for MI300* for now.
- Fix a perf issue which impacts graph instantiate when dev kernel args
are enabled.
Change-Id: I962e58fd9d8dd1a8db95e601cb03a8e9c7bac97f
[ROCm/clr commit: 68f40f78dd]
Node can be enabled/disabled only for kernel, memcpy and memset nodes.
If the node is disabled it becomes empty node.
To maintain ordering just enqueue marker with respective node dependencies.
Change-Id: I710f3e88ab4e76c81f6f86a40a7dc61fd4c7e440
[ROCm/clr commit: e0e63eb04d]
- Implement workaround to ensure HDP writes are done by writing and
reading the HDP MMIO register.
- Implement the same workaround for graphs, we no longer need sentinel
write/readback
Change-Id: I0d3027b46a1f61131ec62e3c8c669ff5184fa6b2
[ROCm/clr commit: f138e0d113]
Display queue base pointer in the log. This can be co-related with AQL
packets
Change-Id: I544f9b6db6ae01c85e57e4b3f0b3fffefcd7c2ed
[ROCm/clr commit: 0567c3b720]
- The correlation_id had random junk values which we were inserting in
the dispatch AQL packet even when no profiler was attached but if we had
a valid timestamp.
- Also make sure we dont even write the reserved2 field in the AQL
packet if no profiler attached.
Change-Id: Icdb7493198c1bb5e2d786a97e027288660854cd7
[ROCm/clr commit: 9a6ddae7b2]
This issue is due to the fact that we set fence_dirty_ flag for every
kernel launch. Whenever any next HIP API is caused, the stream logic
assumes fence is dirty and queues a marker, when its not needed.
Change-Id: I10a49ee951daa92221aa6be75e2334849579a45d
[ROCm/clr commit: d6b4892600]
- For new AccumulateCommand we enqueue nop barrier packet. So during stream sync we need system flush.
Change-Id: I0b97b626bcdae582ef95e7c95030d78df1fa5a54
[ROCm/clr commit: 748c6b3520]
It seems that due to removal of vdev()->isHandlerPending(),
Marker queued to ensure finish is not enqueued and that cause
hung at waiting event for kernel enqueue command.
Change-Id: I364abb2dcb4897b11a7eb61b5d85013b69292792
[ROCm/clr commit: eecbc2e436]
- Add the new fillBuffer kernel, which allows to launch a limited
number of workgroups for memory fill operation
- Switch fill memory to 16 bytes write by default
- Allow to limit the workgroups with DEBUG_CLR_LIMIT_BLIT_WG
Change-Id: Ibad1822f2d42b2fc71bcfc1917c31409c0623e8e
[ROCm/clr commit: f1dc81f427]
- Report kernel names for optimized graph path
- Refactor code so that we store profiling info in Accumulate command
Change-Id: Ib97735a0239aeb9fc3a50a4bb7126dd0bcadc8af
[ROCm/clr commit: b056686607]
- Do not use extra barrier to detect graph end. If its a kernel node we
can use a completion signal for the last packet. Saves roughly 6us for
Phantom testcase per graph launch.
Change-Id: I5e0c2479d9964fbeda86ed97533f6718f49a7f91
[ROCm/clr commit: c3bd229f4f]
- Track all captured commands under a new AccumulateCommand
- Add begin() and end() methods to capture commands
- Explicit TS object now passed to certain methods because
profilingBegin() and profilingEnd() now happen separately and thus can
run into threading issues
Change-Id: I171106bdcad72b057836cb2f3fc398db3533119f
[ROCm/clr commit: 40f41f4d0b]
- Refactor code and cleanup logic for callback saving for event records
Change-Id: I5c56aa8e9c968a5bca70fb07ad1796da318e9e89
[ROCm/clr commit: 1338ff37e8]
- Support graph with different types of nodes with single
branch when DEBUG_CLR_GRAPH_PACKET_CAPTURE flag is enabled
Change-Id: I149a8629769cd0d5849ffefb04f1352668a685b6
[ROCm/clr commit: 38d2c56784]
If we submit a systemScope Barrier, we should reset this flag as there
is no need for dispatch AQL again to flush caches/HDP
Change-Id: I55710feb4ba6650852e785b5cadfa64c6b9ce14e
[ROCm/clr commit: de2b06a7a7]
Ioannis Assiouras
Sourabh Betigeri
Saleel Kudchadker
Satyanvesh Dittakavi
German Andryeyev
kjayapra-amd
Rakesh Roy
Anusha GodavarthySurya
cadolphe
Alex Xie
ksankisa
Jatin Chaudhary
Jaydeep Patel