Unless SDMA blits have actually been used for copies, prevent the DMA
copy status from querying the blit's pending byte status to avoid
creating an unnecessary HW queue.
Change-Id: Ied1fbed73c08f0408f0e3583f9b56f2768c71708
[ROCm/ROCR-Runtime commit: 92467fd282]
Querying pending bytes on a blit kernel is unnecessary when runtime
runs out of SDMA resource since we are returning an SDMA availabilty
mask.
Change-Id: I347efba0c85b70ea3ba8749d76a499afc23909e8
[ROCm/ROCR-Runtime commit: 8c60f04a99]
Added HSA_AMD_MEMORY_POOL_GLOBAL_FLAG_EXT_SCOPE_FINE_GRAINED flag to enable extended scope memory region
where the device-scope atomics act as system-scope atomics
Change-Id: I79fc3207cb630dfc68bed2f8aabd75f35fe80b12
[ROCm/ROCR-Runtime commit: 77bf357647]
Enable sleep for all waiters with event age tracking support kernel.
Change-Id: Icd4e1e8d83b4a54e9f6aaa99691a6573211b3337
Signed-off-by: James Zhu <James.Zhu@amd.com>
[ROCm/ROCR-Runtime commit: 36666f5895]
KFD kernel version 1.13 starts to support event age
tracking which help elimating unncessary busy wait.
Change-Id: Ib447ed6e0350f3110a4d6b9b80a0388000dd0e72
Signed-off-by: James Zhu <James.Zhu@amd.com>
[ROCm/ROCR-Runtime commit: 5871b28503]
Copy on engine API still needs to respect HSA_ENABLE_SDMA settings.
Change-Id: I26038b1e3082d62687c2e279615557583d20f229
[ROCm/ROCR-Runtime commit: 3e3e11bc5a]
Earlier, hsa-runtime was unable to find symbols from a stripped ELF-image becasue
no support to find symbols from ".dynsym" section.
Looking for symbols in .dynsym is enabled by LOADER_USE_DYNSYM=1
environment variable
Change-Id: I4f0e8dd0eb053a6066d4d49b670c52e51149531a
[ROCm/ROCR-Runtime commit: 4142a77375]
Explicitly mention that IPC handles can only be created on GPU agents.
Change-Id: I19bc3578d6e5243c795bf6fbf981ea4bd3bfc2e8
[ROCm/ROCR-Runtime commit: 5e4490f180]
GFX11 and up including some GFX9 devices will not support
old trap handling without the new exception handling.
Instead of a hard assert failure that runs into a core dump,
let ROCr initialization continue instead.
Change-Id: I309becdc72ef4fb2fafd118c1faf0801407e658e
[ROCm/ROCR-Runtime commit: bfb94b3b6e]
status.priv may be read after returning from the trap handler, which
causes sq_interrupt_word_wave.priv to be 0 even though the s_sendmsg
instruction was initiated when status.priv was 1.
To work around this, added a s_waitcnt lgkmcnt(0) after s_sendmsg
to make sure the message is sent before continuing.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Laurent Morichetti <Laurent.Morichetti@amd.com>
Change-Id: Ieb75005ca1559ef03d0efac80e966f521e41fcb7
[ROCm/ROCR-Runtime commit: 6a82b0a038]
Removing this definition as this should already be defined by compiler.
This is causing compile errors on newer versions of llvm because the
macro is being redefined.
Change-Id: Ica6a06f46a14e16d3f52e83b9b5ee8cfd7359510
[ROCm/ROCR-Runtime commit: e4fffa140a]
Adding support for gfx941 and gfx942 ISAs.
gfx940 ISA will use sc0:1 sc1:1 on load/store operations
gfx942 ISA will use default load/store operations
Change-Id: If1efbef86f59e2cf2d48fe359cd4166405a0a579
[ROCm/ROCR-Runtime commit: 41f6d0426d]
When compiling in ASAN mode, remap the first page of device allocations
to system memory. ASAN's memory allocator uses a small amount of extra
memory to store data for housekeeping purpose. But because this memory
is from the GPU memory pool, it might have uncommon memory type for host
to access. Mapping this section of memory to the host makes this memory
accessible to ASAN.
Change-Id: I36f659d616a4d15558372592439a8723c5c84a69
Signed-off-by: Bing Ma <Bing.Ma@amd.com>
[ROCm/ROCR-Runtime commit: 50e754d08b]
Add support for HSA_ENABLE_PEER_SDMA env variable that can be used to
disable use of SDMA engines for device-to-device transfers. Note that
setting HSA_ENABLE_SDMA=0 will disable all SDMA transfers and override
HSA_ENABLE_PEER_SDMA values.
Change-Id: I737b3c2b2efcf3ff237f98bc748f49b8252ed24a
[ROCm/ROCR-Runtime commit: a397373cea]
RUNPATH in libraries will be : $ORIGIN
RUNPATH in binaries will be : $ORIGIN/../lib
Change-Id: Iafa66a8e02cc8c5783903d40927b63652042d2f1
[ROCm/ROCR-Runtime commit: ad002f1e7b]
Update documentation for hsa_amd_pointer_info to clarify which fields
are invalid when the allocation type is HSA_EXT_POINTER_TYPE_UNKNOWN.
Change-Id: Idaed985962c4a98d281ebe01bef8ec2459da3985
[ROCm/ROCR-Runtime commit: 39feb83b88]
Some workloads running on multi-GPU create 1 process per GPU. So each
process creates a GPU agent on every GPU, but will only create queues on
one GPU. This would cause un-necessary scratch reservation.
Change-Id: I50a216f0bcc0b5f707f3943147390b0ecec1ac22
[ROCm/ROCR-Runtime commit: 38e832a682]
If the required scratch allocation is too large, ROCr will attempt to
reduce it by lowering the dispatch's targeted occupancy. The reduction
loop however was prone to overflow if waves_per_cu was not a multiple of
waves_per_group. Ensure no overflow by aligning waves_per_cu to
waves_per_group.
On GC 9.4.3 dGPU, dispatches with a large grid size and a
waves_per_group of e.g. 16 may require to reduce occupancy such that
waves_per_cu is less than waves_per_group to ensure the allocation size
is small enough. Allow this while also ensuring the tmpring scratch wave
count is kept divisible by the number of SEs per XCC.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Change-Id: Ie4016dcd8166a9ae69e9decc26a3eec882b49480
[ROCm/ROCR-Runtime commit: bd63e5045c]
Scratch cache reserved memory is only available for scratch memory use
so do not report this memory as available to the user via the
HSA_AMD_AGENT_INFO_MEMORY_AVAIL api.
Change-Id: I52f96e62536458bcaa52b9f4be5de856d5680dc4
[ROCm/ROCR-Runtime commit: 3477fbc661]
Using wrapper header files will result in #warning message by default
Change-Id: I87739cabb365b9370b1182cf23ca9b54d99149c3
[ROCm/ROCR-Runtime commit: fbcbcd9e73]
Add HSA_ENABLE_SRAMECC environment variable that can be used to
override SRAM ECC mode reported by KFD
Change-Id: I2b95511820a2d3d146a76b03070659c0695b61fd
[ROCm/ROCR-Runtime commit: a180c9ee78]
The gfx940 does not support IMAGE instructions. Any get_info with
IMAGE attributes should return failure.
Signed-off-by: Mike Li <Tianxinmike.Li@amd.com>
Change-Id: I12005628f92780f551ab6f8b41526c66b54c6a59
[ROCm/ROCR-Runtime commit: 46b667e530]
gfx940 uses ttmp11 to hold the queue packet index so the first level
trap handler uses ttmp13 instead to save ib_sts.
Repurpose ttmp11[31] to mean that the ttmps are initialized. The issue
was that the debugger could not tell whether ttmp6 was written by the
trap handler when determining the stop reason.
If ttmp11[31]=0, then the trap handler has not been executed and ttmp6
should be assumed to be 0. If ttmp11[31]=1, then ttmp6 holds the
trap_id, if an s_trap instruction caused the exception.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Lancelot Six <lancelot.six@amd.com>
Change-Id: I9af903abae044b9ec530306229caf3b883f3ee46
[ROCm/ROCR-Runtime commit: f31b312611]
tempnam has been marked as obsolete.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Change-Id: Ie64d9a351bf386da00a96ceff059f685e11f2cca
[ROCm/ROCR-Runtime commit: e82025bffa]
On Linux, the os_thread abstraction is built on top of pthread. Many of
the pthread calls might fail and return error codes. The error
conditions are only checked via assertions (if ever checked) which means
that when doing a release build, no error condition is checked. The
same goes for dlsym/dlinfo and clock_gettime.
This commit improves the situation this by checking the error conditions
and acting accordingly. When the error condition is detected in a
function with a mean to indicate some error to its caller, then this
patch prints some error message and returns. If there is no way to
propagate the error up the call stack, print some error message and
abort the process.
For the os_info::os_info ctor, the only user is CreateThread, which
checks that the built thread is Valid(). If not, nullptr is returned to
the caller.
It could be possible to use exceptions when functions cannot pass
errors, but for now I only use abort as it is what abort would do with
debug build.
Change-Id: I815703c3b95777cc29bb89a7d654ac879c14a759
[ROCm/ROCR-Runtime commit: 183f5d90aa]
When building with g++-11.3.0, I have the following warning:
/home/.../core/runtime/runtime.cpp: In member function ‘hsa_status_t rocr::core::Runtime::GetSystemInfo(hsa_system_info_t, void*)’:
/home/.../core/runtime/runtime.cpp:693:56: warning: suggest parentheses around ‘&&’ within ‘||’ [-Wparentheses]
693 | kfd_version.KernelInterfaceMajorVersion == 1 &&
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
694 | kfd_version.KernelInterfaceMinorVersion >= 12)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch adds the parenthesis as suggested. This silences the
compiler warning.
No functional change expected.
Change-Id: I69c1a73a432b0f2393dbaf36d4424cf0056c535f
[ROCm/ROCR-Runtime commit: 72219b8237]
We used to report HSA_STATUS_ERROR_INVALID_ISA when receiving error code
128, but there are several other reasons why we could be exceeding
number of VGPRs, so updating the error code.
Change-Id: I6a6980d5b07b09c93d00dee5207a0d52399bc77e
[ROCm/ROCR-Runtime commit: f43a284b8e]
One some platforms, e.g Arch Linux, -D_GLIBCXX_ASSERTIONS compile flag
is enabled by default, causing a runtime assertion.
Avoid assertion by using std::vector accessor function data().
Change-Id: I118cdf102c3e353f32c618823e363ee1059f3453
[ROCm/ROCR-Runtime commit: 511855d344]
Fix for overwriting pointer info size provided by caller of
hsa_amd_pointer_info.
Change-Id: I2e5d73ab9ba1a32bc9b4d112bc29b4a99fd8b3b5
[ROCm/ROCR-Runtime commit: c5bf7eb112]
Some applications will keep trying to allocate device memory until the
allocation fails. This causes all device memory to be used up and we are
then unable to allocate scratch memory for dispatches. Reserve enough
memory for 1 small scratch allocation.
Change-Id: I968400d41540ba1aca8f28581f229693eec02225
[ROCm/ROCR-Runtime commit: 8ebf5f9c48]
Wait on completion signal for amd_aql_pm4_ib processing
on ASICs with gfx version >= 9.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Change-Id: Ia704d9cc5b2535dcf8564a30f694262b113f77a2
[ROCm/ROCR-Runtime commit: aec7200cb2]
Engine offset that is the maximum number of engines is still valid
as offset enum 0 is occupied by blit copies so raise the limit by 1.
Change-Id: I6fcab106290e6647702efe297a4281861da4e0b8
[ROCm/ROCR-Runtime commit: fc8f3f9fd5]
David Yat Sin
Konstantin Zhuravlyov
Jonathan Kim
Shweta Khatri
James Zhu
raghavmedicherla
Laurent Morichetti
Ammar ELWazir
Xiaomeng Hou
Ranjith Ramakrishnan
Graham Sider
Saleel Kudchadker
Sam Wu
Mike Li
Alex Sierra
Lancelot SIX
Konstantin Zhuravlyov
Lang Yu