This will faciliate ASIC bringup, including under simulation environment.
Change-Id: Ie027a77a2498cba739fea51f404d9843ce8dbeae
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
BasicAddressWatch causes issues where KFDEvictTest and
KFDQMTest.OverSubscribeCpQueues fails, and results in a GPU hang/reset.
PM4EventInterrupt just hangs indefinitely. Remove them for now to allow
the kernel merges to resume, and figure out what happened in the nv10
merge to cause it
Change-Id: I418f9561ecb3e71bc52ac48ea363fcbde82a8e2b
The SDMA blacklist should contain all tests that use SDMA. It will
be applied to all ASICs that are know to have SDMA stability issues.
Change-Id: I53e723382c12f99bddf9c535000e27737a7ea1f6
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
1. Use s_mov_b32 to move 0xcafe to s18. s_movk_i32 is a sign extention move
instruction. Oxcafe will be extended to 0xffffcafe which is not desired
2. Add wait to s_load_dword instruction to make sure memory read finish before
the next store instruction.
Change-Id: I665d1d471019edfaba5693e07cdc567d4103573f
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
If TTM eviction and restore happens, it may takes very long time if
retry, the longest time is 5 minutes during my test. There is chance
packet is submited to queue while eviction, we have to increase the
Wait4PacketConsumption timeout.
The queue will continue to execute after eviction and restore. If we
upmap the memory from GPU while queue is evicted, this will cause VM
fault. Change to unmap memory after queue is destroyed.
Change-Id: I1b44e2274ea7b83398b2e3293578dad6947cb5af
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Because dma32 zone is on node 0, use all system memory on node 0 will
cause TTM eviction to free dma32 zone for other devices which only
work with 32bit physical address. The TTM eviction and restore may take
too long and cause queue timeout.
Running on other NUMA nodes, the NUMA default memory policy is
MPOL_PREFERRED, means TTM will get pages from local node first, and then
get remaining pages from other nodes. Check /proc/buddyinfo can confirm
this.
Reset NUMA bind to all after the test.
Change-Id: I39b373c07a2d5aa396f5c7602bffabab0481930f
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
PSDB and other jenkins jobs are currently failing on several kfd tests.
This is blocking user throughput for screening patches by PSDB.
Blacklist multiple tests and submit JIRA's.
KFDIPCTest.BasicTest (ROCMOPS-459) .CMABasicTest (ROCMOPS-460) .CrossMemoryAttachTest (ROCMOPS-461)
KFDMemoryTest.BigBufferStressTest (ROCMOPS-462)
KFDQMTest.MultipleSdmaQueues (ROCMOPS-463) (ROCMOPS-416)
KFDEvictTest.BurstyTest (ROCMOPS-464)
Change-Id: I2c7cdeabc26654f39823201ce86d4113b3a98a0e
Signed-off-by: Cole Nelson <cole.nelson@amd.com>
This relates to the following commits:
1. commit aa7c13264a
2. commit 54807526b9
3. commit 6df62c78b8
Change-Id: I3d0d3214baba403b4709b358132b6756a15f42d7
Signed-off-by: Ori Messinger <Ori.Messinger@amd.com>
Allocating these before the big memory allocations minimizes the chances
of spurious out of memory errors.
Change-Id: I94aff9ec7ea34d4dc98ae08ac4cf9dc335b3df7f
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
This reduces thrashing due to graphics submissions only and
significantly speeds up the BasicTest when keeping idle compute
processes evicted. In the BasicTest compute is always idle, so
only one compute eviction and no restore is triggered. Then
graphics submissions complete quickly without thrashing each other.
Change-Id: Iae6da98903b20424a5097f235e1d09cf13e4b41b
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
1. umc error injection only accepts parameter "0 0".
2. flush output to file in order to make writing happen
immediately.
Change-Id: I8d3bde287caee6b90b6eec56c760f5a228be7595
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
The path was wrong based on assumption that GPU dri render
node starts from 0, because if there is a VGA device on
board, node 0 will be VGA and node 1 will be GPU. So the fix
will look at the name of GPU minor node and find the correct
primary node on which RAS debugfs entry exists.
Change-Id: Icc5e63ce48698d5d29105c0417e3bec8afa0a7c8
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Remove the HSA_DEBUG environment variable that controlled the
creation of these mappings.
This should allow the debugger to attach to a running process and
access VRAM buffers through ptrace without having to do anything
special.
On processes that create many small VRAM mappings, this may cause
regressions due to the per-process mmap limit. However, the
sub-allocator in ROCr should consolidate most small allocations
into 2MB blocks nowadays, for good TLB efficiency. So this is
unlikely to cause problems.
Change-Id: I929da1be0f6cb51ec00a02f3f241d16083e4d95f
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
The queue IDs passed over to the kernel via kfd_ioctl_dbg_trap_args->ptr
should be a list of uint32_t's. Need to convert from the passed in
64 bit HSA_QUEUEID to 32 bit uint32_t's.
Change-Id: I8718566d9f9ffc90ce0b2ecc129b10c49d73186a
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
This can cause build failures on unknown of future compiler versions.
Only enable it if explicitly enabled by an environment variable. This
allows us to continue building with -Werror in internal builds with
known compiler versions.
Change-Id: Ic1cd9d223218cc4e4cddba49df93bb357c1cbd40
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
There was a mistake and RESUME was used when it should
have been suspend in two places in the suspend resume
code. This fixes that error.
Change-Id: I69be733d7ae7c14ce5ee8af57a307976e4212d62
This is updating to the new suspend and resume API for the
KFD and the thunk. We now support passing in a list of queues
to suspend, and not just all of the queues for the process.
The kfdtest testcase was also updated so it still compiles.
Change-Id: I71d1b178476bd9df0c311bdedaa6a891528cebcf
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
hsaKmtGetQueueInfo needs to return the control stack size, and the
wave state size for the debugger. These changes are needed to support
returning the new values.
Change-Id: Ib4c60e0ea34446c06aef4a86996250989f348a69
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
- Run more graphics command submissions with shorter delay between
them
- Synchronize after every graphics command submission
- Include the big VRAM BO in the BOList of the command submission
to trigger more evictions
- In QueueTest, run AMDGPU command submissions concurrently with
compute shader on the user mode queue
- Submit AMDGPU commands to GFX queue instead of compute queue to
avoid deadlocks between user-mode and kernel-mode queues on the
same pipe
- Allocate slightly less memory from KFD to avoid allocation errors
due to fragmentation or memory leaks in previous tests
- Running only two processes maximizes the number of KFD evictions
(probably because of lower chances of evicting non-KFD BOs)
Change-Id: If05d53f5fcf690b6488998a3f933f120ddaa71ee
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Add a MMIO_REMAP heap type and expose mmio virtual address
through HsaKmtGetNodeMemoryProperties
Change-Id: I1e585e6dfbec8fa7c85f1dda7b89b763a8e2c439
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
HDP conherence registers are remapped at driver level
to an empty page in mmio space (the remapped mmio page).
This change allocate and map the remapped mmio page to
process space.
Change-Id: I89c405c41870a79c5b58eea0d8e564aa35f55182
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Those two tests cover the basic queue creation and destruction
without submitting packets to CP and SDMA user queues. During bringup,
they bring values in term of untangling the issues arising in queue
creation and packet execution, which are two very different kinds.
Because of those two tests, we also rename some existing tests as
follows:
CreateCpQueue -> SubmitPacketCpQueue
CreateSdmaQueue -> SubmitPacketSdmaQueue
CreateMultipleCpQueues -> MultipleCpQueues
CreateMultipleSdmaQueues -> MultipleSdmaQueues
Lastly, move MultipleCpQueues test closer to the CP queue section
rather than leaving it behind the SDMA queue section.
Change-Id: I110fb3f3fb21878339045dd1d1c8c9d61b8988b7
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
If a Render Node can't be found, we should finish off all child
processes immediately, then return.
Trying to do the check before forking the children results in the test
failing as well, regardless of the status of finding the render node,
which is likely why the forking occurred first in the test's initial
creation. This way we ensure that things finish cleanly before moving to
the next test
Change-Id: I2e1b62fed25c30ff1f179612127c23960da4ee5e
Distributions want to generate debuginfo packages, do not strip them! If
you want to do it during installation use 'make install/strip'!
Change-Id: I3983af24ce4f4ddb189ede0ed0820dfee83b6280
This patch separates the build version (i.e. ROCm version) from the
library version used to set the SONAME of the shared objects. This
prevents the SONAME from getting bumped each time there is a new ROCm
release without any change to the libhsakmt ABI.
1.0.6 was choosen as the library version since this was the
last library version used prior to switching to the ROCm version
numbers.
Change-Id: I7c29ae84d8a362a831e804569d8147ca65155cad
1. RAS error injection debugfs interface has been changed which
is using ras_ctrl instead of *_err_inject.
2. Remove ASSERT_SUCCESS for fwrite, because fwrite returns
the size of written item but not the error number.
3. Using throw exception instead of return to avoid a segment fault.
Change-Id: I6c4d9c2f7e66719faec99abd1552105a08c238a4
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
While this may not be supported in the runtime, the kernel/firmware
support it
Change-Id: I7fe4536a6b3055f39e25f453060e899938645d91
Signed-off-by: Kent Russell <kent.russell@amd.com>
shaoyunl
Oak Zeng
Yong Zhao
Kent Russell
Felix Kuehling
Philip Yang
Cole Nelson
Ori Messinger
Eric Huang
Philip Cox
Alex Voicu
Andreas Schneider
Tom Stellard
Sean Keely